Great question. Relates to the evolution of all my products.Buddy - I watched your new series of videos on the AF3 (thank you) and I have a question about user cabs. I see that user slot #1 is used, but then the next one uses slot #44, then #45, etc. Why the big jump between 1 and 44, will those empty slots get used in the future?
Install away... there will be a minor update coming in a few weeks, but nothing to stop you from enjoying the pack right now.Thanks! Bought the pack, should I wait to install?
It is right now. Latest download always in your user customer area.Sorry man, you must have written it many times but, this version:
12-31-2019_fw11_NakedAmps_BankUpdate_temp
is the latest and greatest for FW11.01?
thanks
I like it, but does the Looper figure into your Layout scheme? Also would holding the top right button bring you back to this layout or to the Fractal MLM? Yes, I am still a noob to the AF3 and even more so where the FC-6 is concernedI'm working on an FC6 master layout to share. I'm thinking this for the main landing page. This will let you pop through every bank and preset and scene from one place.
Thoughts?
View attachment 61760
There is a looper page in the FC-6 layout am preparing for update. I also preserve the Master Layout function. There will be a video explaining everything when done and released in a fee weeks...I like it, but does the Looper figure into your Layout scheme? Also would holding the top right button bring you back to this layout or to the Fractal MLM? Yes, I am still a noob to the AF3 and even more so where the FC-6 is concerned
So everybody -- if you update to the public BETA firmware 12, your phase block and flangers won't work right -- they have been re-done.
I do not advise you to update to firmware 12.x from 11.1 until we get a FINAL Public 12.x (not beta).
Know that I will do a minor 1400+ Naked Amps TonePack update then, which will fix the flanger blocks and phaser blocks and a few other things, like adding the new FAS Wrecker amp, etc.
Thank you very much! The Bass Tonepack IRs look very interestingEDIT: So @DougB415 here is how all the User Cab IRs layout across ALL my TonePacks right now. The only conflict is with the Brit Rock Royalty TonePack's U 055 and U056 IRs would conflict with two Bass Irs from the AX8/XL/Mark III 200+ Bass TonePack.
So I use slot 1, slots 20-33 (Dream Rigs), slots 44-49 (1400+ Naked Amps), and slots 51-64 for Bass Tonepack and the two Brit Rock Royalty Overlap (shown here in slots 66 and 67)
Just to be clean, I may move the Brit Rock Royalty IRs in future update to after 65...
View attachment 62682
Amazon I think... I'm lazy! Only three are mounted, all View Sonics, the lower left is my Mac Thunderbolt Monitor. I use every damn screen too....I'd love another one #5 if I could only add it!@austinbuddy Can you you remember where you got your 4 monitor desk mount stand at? That looks super impressive.
I'm thinking of switching any preset Wah pedals to point to External 1 instead of FC pdl 1 from now on.
Any objections??? This will help those of you who use the back of the unit (Pedal 1 out) and/or don't use an FC-12 or FC-6.
Hey gents....starting to prep for a minor 1400+ Naked Amps TonePack update (good news: the amp sounds don't change under firmware 12... but the phaser and flangers do) using the eventual firmware 12...
I'm thinking of switching any preset Wah pedals to point to External 1 instead of FC pdl 1 from now on.
Any objections??? This will help those of you who use the back of the unit (Pedal 1 out) and/or don't use an FC-12 or FC-6.
(I'll also get this same change done for next iteration of Brit Rock Royalty #1 TonePack too...)
Because you can assign External 1 in the hardware to whatever source you like globally... all from one spot to fix it globally, rather than preset by preset....
I cover how to do that in my latest Axe-Fx III "Getting Started" Part 7 foot-controller stuff video here. At about 3:42 I cover how to set the external 1 to your own pedal Also, I have some more FC (layout) videos to come. These videos are aimed at newcomers and beginners...
Hey gents....starting to prep for a minor 1400+ Naked Amps TonePack update (good news: the amp sounds don't change under firmware 12... but the phaser and flangers do) using the eventual firmware 12...
I'm thinking of switching any preset Wah pedals to point to External 1 instead of FC pdl 1 from now on.
Any objections??? This will help those of you who use the back of the unit (Pedal 1 out) and/or don't use an FC-12 or FC-6.
(I'll also get this same change done for next iteration of Brit Rock Royalty #1 TonePack too...)
Because you can assign External 1 in the hardware to whatever source you like globally... all from one spot to fix it globally, rather than preset by preset....
I cover how to do that in my latest Axe-Fx III "Getting Started" Part 7 foot-controller stuff video here. At about 3:42 I cover how to set the external 1 to your own pedal Also, I have some more FC (layout) videos to come. These videos are aimed at newcomers and beginners...