axe iii

  1. Conley Shepherd

    Bass and guitar on the axe for band set?

    My bass player and I are looking into using the Axe for live sets. I have 4 main patches I use with the bass patch the same in each preset. On occasion, I change presets which gets a cut in the bass audio and my guitar. I time my changes so that my sound does not get altered. The bass does not...
  2. Vecordia

    Buzz noise when connecting axe III to powerstage amp

    Ok. I recently got a Seymour Duncan Powerstage 170 to run my Axe Fx III through a 1x12 mesa cab for home practice. Thing is that I am getting an annoying buzz noise, similar to that when the guitar cable is disconnected from the guitar end. I go from the output 2L (XLR to TRS cable) into the...
  3. B

    AXE III “A Button”Non-Responsive!

    I’m brand new to this forum and have only owned this product since late August so I want to be specific. The button on the far left of the face of the unit does not work… The one under the full color screen, marked with an “A” below it. When it first arrived, it worked fine but no longer. I...
  4. A

    Assign MIDI Functions Directly to FC-12 / FC-6 Footswitches

    The ability to directly assign MIDI functions (without control switches or with additional control switches) to the footswitches of the FC-12 would be life changing (or at least gig changing). Being able to assign Note-On, Note-Off, and other messages would let the AXE III be a viable master...
  5. A

    Using a FC-12 to Control Backing Tracks?

    Is there a way to have the FC-12 send MIDI messages separate from scene changes? I run backing tracks so I've previously been using a RJM Mastermind to send different messages to to the AXE III I have and the Ableton rig. I want to retain the ability to stay on the same sound Any ideas would...
  6. Retro Rick

    FC-6 / FC-12 Waitlist... When?

    I'm waiting for an FM3, I'm also waiting a Foot Controller, does anyone know how long that waitlist will be? When I buy my FM3 it would be nice to be offered to buy a an FC and have them shipped together, any chance of that?
  7. Marciel Marcasso

    AFIII Axe-Fx III 151 - Ballet Slippers - Factory Preset test

    Using the suggestive name "Ballet Slippers" for Steve Vai's music. I made some equalization and minor changes. Hope you like it.
  8. Marciel Marcasso

    Two Guitars and one bass at the same time in AXEIII

    hi I tried to make a simple example using the AXEIII with three instruments at the same time. I used a factory preset from solo Synth ( 246 funky synth) and added ampeg svt for the bass guitar and the Bandmaster for rhythm guitar. All instruments with yours inputs and outputs. Some reverb...
  9. Vecordia

    Implemented Add Gain Reduction Meter Bar to Gate/Expander Block

    I was wondering if it would it be possible to add the gain reduction meter bar to the Gate/Expander block? In the gate from the IN block, there is a meter already, so I assume it should no be difficult to do the same there. I find this meter very helpful while adjusting gate settings, especially...
  10. Moke

    3.01 Tone Match BUGS?

    Firmware 3.01 I've noticed some strange behavior in the Axe-Fx III Tone Match block? It seems to have something to do with the 'Live' vs 'Off-Line' modes? When selecting an 'Off-line' 'tone matched' preset, The match sounds wrong until you select the 'Tone Match' block (Axe-Edit or hardware...
  11. MSS

    Wish Axe-Fx III boot right into Tuner

    Turn on Axe, last preset is loaded then tuner is displayed vs. having to select it. Pretty much the first thing I do is tune up. I’m sure others do as well.
  12. austinbuddy

    Presets MASTER THREAD - AustinBuddy's 1400+ NAKED AMPS TonePack for firmware Cygnus X2

    EDITED: This will now be the Master Thread for both Axe-Fx III and FM9 users of the 1400+ Naked Amps TonePack. You can now purchase the 1400+ Naked Amps TonePack for your Axe-Fx III or the FM9! It's jusy been updated to firmware 22.x or higher for the III, ad and firmware 5.x for the FM9...
  13. guitarfreak365

    Front vs. Rear input on the Axe III

    I remember this thread bellow which highlighted how plugging in a guitar into the front input vs. the rear input on the Axe II sounded different. Is this the same with the III or will they all sound the exact same? I'm mainly wondering because I was hoping to plug my wireless into the rear input...
  14. camilovelandiamusic

    AFIII Axe FX III Factory Presets 31-40

    Thank you all for watching and encouraging me to do more!! The next videos I do will probably be more about scenes, channels, or specific blocks! Here are presets 31-40
  15. guitarfreak365

    Axe FX III Video Reviews

    Anyone early on the waiting list planning on doing a full review on the AXE III shortly after they get the unit? Personally I'll be waiting till the FCs are available before purchasing but I'd really like to see what this new flagship can do! Seriously pumped for this unit and the future years...
  16. guitarfreak365

    Will 3rd party expression pedals work with axe III’s FC?

    I run 3 mission ep-1s with my mfc currently. I’m not very knowledgeable with this stuff but since the new FC is dumb and isn’t an actually midi controller does that mean we would have to buy a special expression pedal from fractal if you wanted to control an expression pedal of their FC?
  17. guitarfreak365

    Help me! Floor vs. Rack

    I know that we don’t have experience with the axe III yet and know nothing about the ax8-2 but I’m really having trouble deciding which way I want to go. I know I don’t want to buy both. I’ve used the axe fx II with the MFC101 for years but have no experience with the axe8. It would be awesome...
  18. guitarfreak365

    Double-tracking (axe iii pitch block)

    I’ve used the enhancer block and HAAS delay to mimick two guitars being played at once on my axe ii. The new pitch block for the axe iii has something called double-tracking. Anyone have any info on is? I’m super intrigued!
Back
Top Bottom