Search results for query: *

  • Users: Jurek
  • Order by date
  1. Jurek

    How to switch between two preamps

    Draw a block diagram of the connections, describe both multi-effects - why should you connect them in series, one by one?
  2. Jurek

    How to switch between two preamps

  3. Jurek

    First gig with new (used) FX8

    Well done, congratulations, I have the same, but I play in stereo with two Fender HotRod combos. Sounds wonderful, from the Stones, The Kinks, AC / DC to The Shadows... Cheers!
  4. Jurek

    Question about the tuner

    Hi duneman, We basically have 2 tuners: one in the FX8 unit itself and the other in a connected laptop with the FX8 editor preloaded. With the FX8 tuner you tune the instrument on stage, the tuner is very precise, but you won't read how many cents are missing. The second tuner, software on the...
  5. Jurek

    Flexible Footswitch Mapping

    Interesting question, and even more interesting would be the answer! 🙂👍
  6. Jurek

    FX8 VS MKII

    Hello, I can only share my own experience. I have the original FX8. I find that the device has a negligible effect on the color and dynamics of the amplifier. It is simply "transparent", it reflects 99.9% of what the amplifier alone gives. The mates have the FX8 II - and despite our best...
  7. Jurek

    FX8 mkII is that good!

    " All's well that ends well. Congratulations!
  8. Jurek

    FX8 vs G-Major 2

    I had a very similar experience: Korg AX3 (oldie but clever:-) G-System - easy to use, good sound, modest editing, heavy weight! and finally the FX8 - all you need... ♪♫ ❤♪ ♬
  9. Jurek

    FX8: Global gate off, 4CM

    If you have a schematic of your amplifier, please send it to me. Such a parallel effects loop can often be easily converted into a serial loop.
  10. Jurek

    FX8: Global gate off, 4CM

    Tell me please, what type of amplifier are you currently using?
  11. Jurek

    FX8: Global gate off, 4CM

    FX8 (in 4cm) works better with serial effects loop. The processing quality is so precise that there is no need to use a parallel loop. Well, unless you only have a parallel loop. In this case there is a complication: you should always mute direct-sound in blocks, because this one automatically...
  12. Jurek

    How to setup FX8 direct to audio interface recording and get good tones?share ur setup beside miking please

    In principle, FX8 is produced with a view to working with a live guitar amplifier, with the amplifier contributing strongly to the final effect. It is better to immediately convert to AX8. But if you already want to get burned ;) you can try with a speaker simulator. However, I see it in black...
  13. Jurek

    Looper and Preset Changes

    Check the LOOPER LOCATION in the third preset (C) Looper should be located in the same place as in preset A and B.
  14. Jurek

    Anyone else wondering if FM3 might replace their FX8?

  15. Jurek

    ALL BYPASS blocks the signal (FX8)

  16. Jurek

    ALL BYPASS blocks the signal (FX8)

    I do not have a problem with the sound. I mean, if in a 4CM configuration I will turn on the (POS) TRUE-BYPASS (or ALL), the amplifier stops, as with the tuner turned on. In the instructions however he writes, that in this moment all effects and in general the whole FX8 is omitted, and the...
  17. Jurek

    ALL BYPASS blocks the signal (FX8)

    My amplifier is Fender HotRod, here a simple serial loop has been used, which is permanently active. (After inserting the jack plug into the Return socket, the amplifier will fall silent. If the other end is inserted into the Send socket, everything is back norm)
  18. Jurek

    ALL BYPASS blocks the signal (FX8)

    I am asking forum players for help again: My FX8 in the ALL-BYPASS mode blocks the signal, and the amplifier is silent in this mode (4CM method, serial effect loop). The ALL-BYPASS mode should, after all, allow pass the signal in an unchanged form from the guitar to the input of the amplifier...
  19. Jurek

    BYPASS problem (FX8)

    Hello all, So far I used FX8 in the simplest configuration: guitar>>FX8>>amplifier. I've been experimenting with the 4cbl method for a few days and I have the following problem with BYPASS: If I turn on BYPASS-PRE, 1. only the amplifier preamp works and FX8-effects in the PRE zone are bypassed...
  20. Jurek

    Brothers In Arms - Dire Straits (FX-8 pre effects + volume pedal)

    Very nice and stylish played and sung! Happy New Year! :christmastree::christmastree::christmastree:
  21. Jurek

    'Hotel California' - rehearsal recording

    Make congratulations! The enormity of work involved! This is a very difficult track. Nice solo, bit of too much guitar-chorus in the background, great vocals (high scale!). Greetings.
  22. Jurek

    Does the FX8 Mark II Require an FRFR Speaker for Optimum Sound?

    FX8 with Fender DeLuxe - this is the optimal set. AML
  23. Jurek

    looper balance with 7cm fx8 rig

    Quite an interesting concept, maybe she will help me. Could you do the drawing: where to insert the A / B switch, which has 3 ways. Thank's.
  24. Jurek

    Wampler Tumnus Deluxe

    I apologize for the somewhat philosophical treatment of the subject... The whole really sounds amazing! But I think that a small amount of merit is due to the Wampler. You need to have fingers like Pete Thorn and talent like Pete Thorn. Then almost every overdrive will sound phenomenal. It's a...
  25. Jurek

    FX8 VS FX8 MARK II made in??

    It is widely believed. My friend says, he saw the signature inside the machine 'Made in China'.
  26. Jurek

    FX8 Phantom Power Midi

    Both devices can be operated with a standard MIDI cable, because the MIDI signal goes by other veins than the phantom.
  27. Jurek

    Firmware Update

    After update, e.g. the sound of drivers somewhat greasier.
  28. Jurek

    OUT PRE looper and changing scenes issue?

    Try the same thing on some simple preset, where a reserve of memory the processor is greater. I noticed that the looper generally gets into trouble, when the memory assigned ≧ 70%
  29. Jurek

    input impedance

    I use only the maximum resistance value :-) I have not found any benefits from lowering the input resistance.
  30. Jurek

    Jump from V3.02 to V5.00?

    I think that you can directly install the newest software.
  31. Jurek

    Relay and 4 cable method with the Hot Rod Deluxe III

    Question How do I assemble a cable to make the FX8 relay switching work for my Fender HotRod DeVille, HotRod Deluxe or Blues Deluxe ? Answer Please assemble a cable according to the drawing below. The components are available from most electronic parts suppliers. A skilled technician will be...
  32. Jurek

    FX8 MK I vs MK II noise level?

    MKII got additional attenuator at the Input, allowing instruments to more easily with large signals (e.g. w. active electronics). This means that you do not need (as in MKI) to compensate for the loss of the input signal gain - to increased output. This operation has just brings a little less...
  33. Jurek

    Is there a way to change scenes on footswitches 1-4 and use 5-8 as stomp boxes?

    Here is an extract from the statement (s43) TO ENABLE/DISABLE SCENE REVERT: 1. Press the SETUP button and press footswitch 2 to load the I/O menu. 2. Turn to the MIDI page. 3. Use the NAV knob to select “SCENE REVERT”. 4. Use the VALUE knob to select “OFF” or “ON” 5. Press the EXIT button 2x to...
  34. Jurek

    FX8 V5.00 Public Beta

    Wow, super! I am curious, wah effect is quite an arduous task for the virtual reality ;-)
  35. Jurek

    Looper Location

    1) Global looper location: OUT PRE – The looper is positioned after PRE effects just before the OUT PRE jack. However, if 4 CM - I think OUT POST - (Not tried). 2) Recorded loop is not permanent.
  36. Jurek

    How do you start the Metronome from FX8 Edit?

    Metronome is running in the background non-stop, but only with FX8 board can enable it.
  37. Jurek

    If not using 4cm, should you still use a humbuster cable?

    Definitely worth use the humbuster cable.
  38. Jurek

    help with transparency

    Please check first whether the effects loop (of the amplifier) is 100% neutral: a short jumper cable jack/jack 2 sockets loop effects: Send and Return. If the sound is the same as before the short circuit, the problem is in fact out of the amplifier.
  39. Jurek

    Toggle between 2 drive block

    The driver has the ability to move in two different states: X and Y. You put it into the block and according to the wishes configuring. They may be quite different, for example: Facefuzz and Booster and will work alternately. (sorry... per google transl.;-)
  40. Jurek

    FX8 V3.50 Released

    Is great! And finally handling FX8 begins to be as pleasant, as my old G-System ;-) (tc-electronic) Because sounding FX8 has no equal.
  41. Jurek

    Sequencer

    FX8 is able to do all very similar :-)
  42. Jurek

    FX8 Mark II looks sweeeet!

    Cool! Black Is Black ;-)
  43. Jurek

    Can I copy X to Y with Front pannel?

    I think that goes only with software FX8 Edit.
  44. Jurek

    Wish MUCH BIGGER Patch/Scene Name on diplay!

    +1 It would be cool to see the name of the scene on the display!
  45. Jurek

    GIGWRX arrived: PIC within!

    In fact, everything looks now, "appetizing";-) I'll order it too.
  46. Jurek

    Use an external MIDI device to transmit MIDI Clock (as Clock Source) to the MIDI IN of the FX8.

    FX8 actually reacts and pace comes closer the Alesis SR16, but something here "lame": audio and rhythm do not go synchronously. Of course QUANTIZE parameter = Quarter Recording only a metronome goes only initially equally. Precisely for this reason I used Drumcomputer, I thought that something...
  47. Jurek

    Use an external MIDI device to transmit MIDI Clock (as Clock Source) to the MIDI IN of the FX8.

    OK thanks. I will check it right away
  48. Jurek

    Use an external MIDI device to transmit MIDI Clock (as Clock Source) to the MIDI IN of the FX8.

    I would use my Alesis SR16 as a source of MIDI clock to be able to record guitar in his rhythm on the looper.
  49. Jurek

    Use an external MIDI device to transmit MIDI Clock (as Clock Source) to the MIDI IN of the FX8.

    What you need to do to run the procedure: Use an external MIDI device to transmit MIDI Clock (as Clock Source) to the MIDI IN of the FX8 (FW3.0)?
  50. Jurek

    FX8: The Looper goes with the metronome klick asynchron.

    These things I have classified as first :-)
  51. Jurek

    FX8: The Looper goes with the metronome klick asynchron.

    In step 1) I wrote, a looper and a built-in metronome do not go precisely synchronized. This throws light on the rest of the issue. For many years I have used different Looper: Lexicon JamMan, Boss, Digitech, Electrix Repeater... and so I had no problems with timing. FX8 lured me through had the...
  52. Jurek

    FX8: The Looper goes with the metronome klick asynchron.

    Guten Abend, mein Englisch ist schwach, hilfreich mr google :)...... Mein Problem: 1) Der Looper geht mit dem Metronom, den ersten 2 bis 3 Wiederholungen korrekt synchronisiert. Aber nach, dass die zwei von ihnen (das Aufzeichnungsmaterial und Metronom-Klick) gehen Überstunden immer asynchron...
Back
Top Bottom