Search results for query: *

  1. B

    Ollo Hedphones Update

    Id be interested in understanding what format the XPS data file uses - is it a well known format?
  2. B

    FM9 Firmware Version 7.00

    @Gonash - I agree with Jozsef - thats a great preset - is it available to download anywhere?
  3. B

    FM3 Firmware Version 8.00 beta 1

    That’s not the case for me. I only use the drive and master volume controls, most of my presets have the Amp tone controls at default values, and I don’t tweak anything else.
  4. B

    FM9 Firmware Version 7.00

    Im also interested in this - where could I grab it from?
  5. B

    FM3 Firmware Version 8.00 beta 1

    Yes, Gapless was switched on by default. I had Spillover set to All already set from FW7.
  6. B

    FM3 Firmware Version 8.00 beta 1

    Have noticed the Kill Dry option hasnt been added yet - thats great on my FM9, so hope thats in the next update.
  7. B

    FM3 Firmware Version 8.00 beta 1

    Wow, my presets have dropped about 5% CPU usage (72% down to 67% and 76% down to 70%)- amazing job Fractal team!
  8. B

    Development with the next firmware

  9. B

    Axe-Fx III Firmware 25.00 Release

    The Dry kill option is great. is it likely to make the imminent FM3 beta firmware or will it need to wait until a later release?
  10. B

    Axe-Fx III Firmware 25.00 Release

    Its falrly simple Input 1 is guitar Output 4 takes the clean guitar signal to a Digitech SDRUM (drum machine) that comes back into Input4 Input 2 is a microphone feed - that goes out of Output2 and cabled back into Input 3 Output 3 feeds a non cab sim dry feed to a powered guitar cab (Only used...
  11. B

    Axe-Fx III Firmware 25.00 Release

    Im not hearing any difference on my parallel "dry kill" delay block if I set Global Effects mix to 50% or 200% (I do when I use the Global reverb mix on the reverb setup the same way) . Does the Global Effect mix work for others with parallel delay blocks? AH FOUND IT - I didnt realise you need...
  12. B

    Axe-Fx III Firmware 25.00 Public Beta #2 (Cygnus X-3 Release Candidate)

    I hope it goes on the FM3 next, those owners haven’t had a firmware update for 6 months. Us FM9 users have had a great update recently.
  13. B

    Wish Control FC switches from external MIDI CC

    +1
  14. B

    Are drive level controls normalized or do they respect the real pedals?

    To the pedal Cliff has. But may not match yours due to component tolerances (Potentiometers can have upto 20% tolerance)
  15. B

    RESOLVED - USB Driver virus warning? (Audio Driver Update for Axe-Fx III, FM3, and FM9)

    Resolved - new links work great, thanks!
  16. B

    RESOLVED - USB Driver virus warning? (Audio Driver Update for Axe-Fx III, FM3, and FM9)

    Im getting this warning from the latest windows driver downloads (FM9 and AxeFX III) - any idea why?? https://forum.fractalaudio.com/threads/audio-driver-update-for-axe-fx-iii-fm3-and-fm9.202435/
  17. B

    Hi im back

    Did you leave?
  18. B

    Axe-Edit III 1.13.14

    New Overdrive Volume position is much easier to see - thanks!
  19. B

    Fractal FM9 MK II?

    So you've had four months using it already! thats great. there will always be new products coming out - enjoy what you have.
  20. B

    Collective Soul

    I assume you mean the one I’ve circled on red, but your description is a bit vague - a screenshot would have helped.
  21. B

    FM9 Firmware Version 6.00 public beta (1)

    Thanks - I can see the Overdrive volume control on the FM9 screen and it defaults to 5 (the same as the Master Volume). If I turn it upto 10 the block volume is about the same as the other amp models. So are the default values too low?
  22. B

    FM9 Firmware Version 6.00 public beta (1)

    Ive spent some more time looking at the ODS volume issue - created a new preset and setup from scratch and see same volume drop issue - if you scroll past the Fox ODS, Mr MZ-8, ODS models in the amp picker window the volume drops dramatically! I have resaved existing presets using the ODS...
  23. B

    FM9 Firmware Version 6.00 public beta (1)

    Im used to small differences, but 25db output difference means you blow your head off if you setup a ODS amp at unity level, then scroll to a different amp type! It didnt used to be that big a difference.
  24. B

    FM9 Firmware Version 6.00 public beta (1)

    Cheers - have updated AxeEdit.3 Not running master volume very low, the ODS-100 channel is way quieter (About 25db) than the Friedman channel with similar Gain and Master volume settings.
  25. B

    FM9 Firmware Version 6.00 public beta (1)

    All ODS-100 amps seem very low on output - have to crank Out level to +10db to match other amps at -12db. Is this expected behaviour? Have tried to save a preset to upload, but FM9Edit times out "Communication time out" and hangs once Preset -> Export preset is selected. FM9Edit works ok...
  26. B

    FM9 Firmware Version 6.00 public beta (1)

    Gapless switching is referring to no dropouts in the Audio , not the time it takes after pressing a footswitch… Just to help others ;)
  27. B

    FM9 Firmware Version 6.00 public beta (1)

    CPU increase on my ~80% CPU patches seems very small as well - great work!
  28. B

    Dirt Cheap Used FM9's?

    It’s a scam, and having to pay in a different currency takes Reverb out of the return process as it’s PayPal that deals with it. Avoid.
  29. B

    Can use my Fm9 for channel switching on my real tube amp?

    I use one of these to control amp switching via midi. It’s very flexible and has been used for many amp stitching methods. https://voodoolab.com/product/control-switcher/
  30. B

    Crybaby converted to Expression pedal issue

    What do you mean by doesn’t work? No change in the pedal output at all, or just a weird short travel? A short travel issue is usually down to tip and ring being wired up wrong.
  31. B

    Wish Wish please - Mimic (Mimiq) Block

    +1 would love a Mimiq style doubler effect
  32. B

    Axe-Fx III Firmware 24.02 Beta #1

    Which version of the preset? They get updated every year or so, so you could be using one from four years ago.
  33. B

    Axe-Fx III Firmware 24.00 Public Beta #2

    Already Sunday in New Zealand
  34. B

    "Did I Choose The Best Guitar Amp Modeler In 2023?"

    Those thin plastic films really don’t do any protection, do you still have them on your furniture ;)
  35. B

    FM9 Latency - Around 5ms?

    5ms latency from product + no additional ms when wearing headphones/in ears standing 5ft from an unused speaker = 5ms ;)
  36. B

    Axe-Fx III Firmware 23.05 Release

    Then surely you get back on the dials and get it sounding to your taste again. Must be easier than typing a forum post to complain.
  37. B

    3rd party Dynacabs

    I dont think they will ever be downloadable onto the hardware - would need to use CabLab 4 to process externally, then download mixed IR to AXEFX.
  38. B

    Axe-Fx III Firmware 23.05 Release

    You shouldn’t need to update dyna cabs if they were v1.05 previously. Which firmware version did you update from?
  39. B

    Axe-Fx III Firmware 23.05 Release

    No, my output 1 stereo setting got overridden to mono when I set out 4 to Copy L to R
  40. B

    Axe-Fx III Firmware 23.04 Release

    Huge thanks for working this out, I’d been thinking my AxeFX was sounding worse than my FM9 in the last week and this was the cause. Saved me a huge amount of time resetting the system and troubleshooting!
  41. B

    Large Font for Axe III

    +1 to large font screen
  42. B

    Wish FREQOUT pedal

    Interesting - Id love a Freqout effect in the AxeFX - will check out youtube for an overview of line 6s effort.
  43. B

    [solved] External momentary switch logic question

    Have mapped FC1 Ext Sw 3 as a Stand In Switch for Control Switch 6 for now as that works in the correct way (ie totally opposite to if I use FC1 Ext Sw 3 directly!)
  44. B

    [solved] External momentary switch logic question

    Thats the frustrating bit, they work as expected for SISs. I now want to create one of them as a delay “hold” by ramping up the repeats and mix, and I think I’ll have to switch polarity. Need to check what happens if the switch isn’t plugged in as I don’t want it going to full delay if I don’t...
  45. B

    [solved] External momentary switch logic question

    Im struggling to understand the external momentary switch logic. I have a normally open (ie push to close) switch attached. When I look in the Modifier window I see when the button IS NOT pushed (ie open) the modifier is showing as at its max range! why is this? When I push the switch it is at...
  46. B

    Axe-Fx3 resale value in 10 years

    If it only loses 50% in 10 years - thats 5% a year - what a bargain!!!
  47. B

    I made Fractal GPT (Update: you can use it too)

    MattGPT seems a great use of his knowledge as well! 😉
  48. B

    Wish Freeze is heating up

    That momentary mode in the EHX video is what I’m trying to get in the AxeFX.
  49. B

    Wish Freeze is heating up

    The gapless patch changes is done by sustaining the previous patch until the new one is ready and only uses a few % CPU, so a slightly longer version of that would be more efficient that a full reverb block. Im trying to do this on a AXEFX and a FM9 - so want a common approach and the reverb...
  50. B

    Wish Freeze is heating up

    Agreed, I’m just trying to setup a “chord sustain” type block to allow short riffs to be played over momentary footswitch held chords, and setting up an additional reverb block just to do this seems CPU wasteful.
  51. B

    Axe-Fx III Firmware 23.02 Release

    Someone from Fractal Audio said it will ask for the dynacab file to be updated if it’s the wrong version, so let the unit decide.
  52. B

    Axe-Fx III Firmware 23.02 Release

    Thanks!
  53. B

    Axe-Fx III Firmware 23.00 Release

    Do you need noise gates on inputs 2,3 and 4? Setting the input block noise gate level thresholds to off saves a few percent.
  54. B

    Axe-Fx III Firmware 23.00 Release Candidate #2 (Beta #7)

    Are the rotary blocks unusable with this beta version? Not sure if I should update from beta6 or wait.
  55. B

    LT TV MIX #2 in wav file format?

    It is possible to resample the file using cablab and third party IR capture SW.
  56. B

    Axe-Fx III Firmware 23.00 Release Candidate (Beta #6)

    AxeEdit seems to work ok in my tests. All reverbs are updated.
  57. B

    Firmware 23.00 Beta 5 thread gone

    Its already Friday in some parts of the world - stop having such an American-centic outlook ;)
  58. B

    Firmware 23.00 Beta 5 thread gone

    Yep, issues with a few of the reverb effects. I can sell my downloaded copy - but it might lock up your machine ;) - just wait there will be an updated version soon.
  59. B

    FM9 Firmware Version 5.01

    Shoudlnt the initial post say this version of Fm Edit is needed rather than 1.02.01? https://forum.fractalaudio.com/threads/fm9-edit-1-02-05.198035/
  60. B

    DynaCab Pack Limited Public Beta

    Had a "failed to install" error, but the pack shows as authorised. How do I reinstall? EDIT - ok, had to De-Authorise and reinstall, but would be easier to have an option to explain that.
  61. B

    Recommended Mic Preamp to record vocals thru axe?

    The FMR RNP is a good preamp, set the axefx input to “copy L to R” and you’ll have a good mono input feeding any axefx blocks.
  62. B

    Conventions for controller assignments

    Wah tends to be Ext1 in the factory presets.
  63. B

    Axe-Fx III Firmware 22.01 Release

    Thanks for asking, I’m just enjoying what I have. How about you?
  64. B

    Looper Question

    Yes I do this all the time. But my presets are setup the same (looper is in same position and settings in every preset)
  65. B

    monitor hum/noise fm9 with iloud monitors

    What cabling are you using to connect the FM9 to the monitors? Balanced XLR?
  66. B

    Announcing AxeCapture: A plugin to save Axe-FX presets in your DAW project.

    Huh? It already works with the FM9.
  67. B

    Axe-Fx III Firmware 22.01 Release

    I hope theyre working on the CabLab 4 release.
  68. B

    Mission SP1

    Switch inputs on FM9 are not TRS, try a TS cable (use a spare guitar cable to check if this is the solution)
  69. B

    Just bought some EV PXM - 12MP’s

    Why did you video yourself opening the box? I use mine on Monitor2 as well.
  70. B

    WTB Atomic CLR Active Wedge

    For balance, I’ve got 2 CLRs. One original and one neo. The original had a power amp go bad and took £150 and a month to get repaired. They do sound good, but appear fragile.
  71. B

    Is there a consensus headphone choice?

    Same here for use in dSONIQ Realphones (which i already own) - I wont use Waves products due to the ongoing yearly maintenance costs.
  72. B

    Is there any chance/way that FM3 could be upgraded to turbo?

    Why’s this in the FM9 forum??
  73. B

    FM9 Firmware Version 5.00 public beta (1)

    You will have a final release sooooooooon, just lie back and enjoy the wait 😉
  74. B

    3 Stand-in Switches PLUS Expression pedal with toe switch?

    Morningstar controllers can send separate press and release messages. https://manuals.morningstar.io/mc-midi-controller/Action-Type-List.181698574.html
  75. B

    3 Stand-in Switches PLUS Expression pedal with toe switch?

    Ive not used any Disaster Area stuff for at least 5 years - they used to be very limited (PC changes only) but look to have better functionality now.
  76. B

    3 Stand-in Switches PLUS Expression pedal with toe switch?

    The MC3 can send multiple user defined CC messages with each button push, so i send CC#6 = 0 (switch off wah (heel down position)) when selecting any other MC3 preset - I could even set volume to max when engaging the wah, then back to a lower value when exiting. You need to be wary with midi CC...
  77. B

    3 Stand-in Switches PLUS Expression pedal with toe switch?

    I use a expression pedal into a Morningstar MC3 to send midi to FM9 - it allows me to map the expression to one of three separate midi CC's (depending on MC3 preset I select) - so I can use one pedal for volume (CC#6), wah (CC#7) or effect mix (CC#8). So worth checking that out.
  78. B

    Is there a consensus headphone choice?

    With the Waves plugin, do you need to pay yearly to keep the software updated? or does the Ollo licence give you perpetual ownership? Ive been screwed by their "Waves Update Plan" payment crap thats needed to to have two licences on different machines in the past.
  79. B

    FM9 FAQ

    Lol, I love the term “roughly” applied to estimated data quoted to 2 decimal places ;)
  80. B

    MeloAudio EXP-001 expression pedal?

    Umm, the Meloaudio EXP=001 is an expression pedal!
  81. B

    Announcing AxeCapture: A plugin to save Axe-FX presets in your DAW project.

    Hi @GlennO - will the VST need updating as Fractal firmwares get updated/evolve? If so is there a way the VST can check if its the latest version?
  82. B

    Looper - output right or left only?

    Yes, forgot to mention I use a parallel looper block. Set Dry Level to -60db.
  83. B

    Looper - output right or left only?

    Yes it does, ive just tried and its simple to patch the looper to left or right channel only.
  84. B

    Bug firmware

    Agreed, I think I got the FM3 and FM9 issues mixed up..
  85. B

    Let's see those FM9 rigs!

    Finally finished my FM9 & FC6 setup. Mounted by bolts onto a Swan Flightcase, customised with a hinged raised platform for pedals (PSU mounted below). Using a Morningstar MC3 to send expression CC messages to either External 1, 2 or 3 expression controllers (switchable from the MC3). A few...
  86. B

    FM9 For Guitar and Vocal?

    I’m running through a JHS colourbox V2 for preamp into input 2 of FM9 and out of Out2 to PA.
  87. B

    Bug firmware

    Gigging with beta firmware is risky. There’s known issues with the 5150 and 6160 models and you are at risk of discovering bugs during your set. But if you do have a bug, report it in the relevant firmware thread with details of how it occurs, copy of the preset,etc, don’t create a separate...
  88. B

    Bug firmware

    Hope he’s not gigging with the beta firmware!
  89. B

    Wish Toggle Layouts and Views?

    Yes you can. But not to toggle between views from a Stand in Switch (which doesnt switch with the layout), my SIS use spare switches on the Master Layout of the FM9 - SIS are linked to buttons on a specific layout, so dont switch with the FM9/C6/FC12 display.
  90. B

    Wish Toggle Layouts and Views?

    I was just about to ask or this feature, good to see Im not alone in needing this. I use an external SIS to switch between layout 7 view1 and view2 on a FC6 from my FM9, and this "toggle views" capability would be much better than the current press/press hold setup (as I need to remember which...
  91. B

    FM9 Firmware Version 5.00 public beta (1)

    Im sure its 1024 samples - search for that in the discussions. ah - here it is https://forum.fractalaudio.com/threads/cab-block-ir-length.194400/post-2420707
  92. B

    Can't Install DynaCabs on my FM3? [solved]

    Of course he did - he definitely read all the instructions carefully ;)
  93. B

    what a hack

    Quill and ink pot is where it’s at dudes! Modern tech is so digital!
  94. B

    Volume/Expression Pedal Calibration only 50%

    There are various ways that a TRS Jack and pot can be setup. Looks like yours isn’t a voltage divider so doesn’t respond to the FM9 correctly. See this article- https://missionengineering.com/understanding-expression-pedals/
  95. B

    No sound from new FM3 Mk II Turbo

    Do you have any expression pedals or Midi cables plugged in?
  96. B

    Wish Display looper window on FM9 screen using footswitch

    I’d love to be able to show the looper screen on the main FM9 display when opening the looper layout (this can only be done by browsing to the looper block in layouts currently). Can it be added as a footswitch function please?
  97. B

    Blend 2 factory cabs to save DSP

    Thanks, I dont think thats possible on Windows PCs unless you use ASIO, and the MLSTool doesnt have ASIO in the audio options.
  98. B

    Blend 2 factory cabs to save DSP

    What settings do I need to setup in MLSTool for USB audio ? I cant seem to get any signal to USB Input on the AXEFX grid, thanks.
  99. B

    Bad day.

    Gives us some details of how your monitoring the axeFX, did that change when you used it with your Mac? Etc. Have you turned up out1 dial, etc
  100. B

    Just bought some EV PXM - 12MP’s

    You could run that fully open and control volume from the FM9 OUT1 knob.
Back
Top Bottom