Search results for query: *

  • Users: scottp
  • Content: Threads
  • Order by date
  1. scottp

    Fender Jazz bass Pickup question "Noiseless"??

    A friend on mine recently installed a new set of Gen 4 Noiseless Jazz pickups in his MIM Jazz bass. If you have experience with them, are they truly noiseless? His seem to have typical single coil noise. Thanks.
  2. scottp

    Looking for Inexpensive modeler with headphone out

    My son asked me about this. Since I only live in Fractal land, I'm not up to date on what is available. This would be for guitar and bass. Again, inexpensive and easy to use are very important. Any suggestions?
  3. scottp

    Dyna-Cab recommendation for a single coil Tele

    Can you recommend a speaker which you have used with good results for a Tele. Looking for traditional clean tones with the ability to add gain/grit/distortion and keep a good tone together. Thanks.
  4. scottp

    SOLD FM3Turbo MK II New Mint

    For sale the Fractal Audio Systems FM3 Mark II Turbo! In like new, mint condition. This has the headphones jack. The original screen protector has never been removed. Comes with all original packaging and materials. Ships to the USA lower 48 states only. Will be shipped in the original double...
  5. scottp

    Mid Boost in amp block

    Does anyone know what the specific parameter settings are for this? I did some digging on line and couldn't find this information. Thanks.
  6. scottp

    SOLD Performaxe Guitar Rest Mint!

    For sale The Peformaxe! This unit is in Mint condition. Comes with all original packaging! Ships to the lower 48 US states only. $120 Includes shipping.
  7. scottp

    Level & Crown fret work

    For the guys who regularly do this, how much of the fret tops do you leave flat when crowning? Thanks.
  8. scottp

    Pop up on home screen on a PC

    Anyone ever see this? I just started seeing it the other day. Any idea what it is or where it comes from? It seems to disappear after about 5 minutes after start up.
  9. scottp

    Difficulties seeing the side dots on the neck on a dark or dim stage

    Hey guys, do you have any suggestions for seeing the side dots on a dark/dim stage? Thanks.
  10. scottp

    SOLD FM9T FM9 Turbo! $1800 Shipped/Paypal

    Mint Fractal Audio FM9 Turbo. Comes with all original packaging. I have a stellar history as a seller on different platforms for over 20 years. Pictures available upon request. This sale is for USA 48 states only. Thank you.
  11. scottp

    Filter boost Placement on grid

    Hey guys, just thinking about this. Do you think the best practice would be, placing the Filter Block right before the output block? This Filter Block is controlled by the EV-1 for a volume boost from 0 to 3.3 dB. In this case I am running Pitch, Delay, PlexDly all in parallel. The Filter boost...
  12. scottp

    [solved] Tap Tempo Flashing ring on FC-12, disable?

    Can we disable the flashing ring for this? Please refresh my memory. I've been all through the device settings and Axe-Edit. Can't find any control for it.
  13. scottp

    Reverb Nimbostratus doesn't sound the same in FM3 as in AX3.. help

    So I have a nice sounding Reverb in my AX3. I applied all the parameter values to the same reverb type in the FM3. It doesn't sound the same at all! I checked the values like 5 times. Type is Nimbostratus, Nothing crazy going on in there. I'm running it in Parallel. Is there something I am not...
  14. scottp

    Compressor Location in the Amp Block

    Where is the Compressor located in the signal flow? I don't see it mentioned here.
  15. scottp

    Multi Delay Block to sound similar to Plex Verb... help...

    Looking for help getting the Multi Delay block to sound like the Plex Verb. Like which model in the MulitDly block to choose? I'm going for a nice long ambient sound with the time length about 10 seconds. I Plan to use it in parallel. Thanks!
  16. scottp

    PSA for the best sounding best value IEM KZ ZS10 Pro's

    I thought I would share this the community. They are on sale for $39.99. I play with a large group of musicians who use these and everyone really likes them, especially when paired with the Comply Memory Foam tips! I spent over $600 on custom mold Alclair's. These absolutely BLOW them out of the...
  17. scottp

    Display indicates "Control Switch 1 ON" then OFF on CS1 assigned

    Weird issue here, I have an EV-2 attached to pedal 1 to control 3 modifiers and that works perfect. On the FM3T display I get the message as stated above when I quickly move the EXP pedal. "Control Switch 1 ON" then "Control Switch 1 OFF" when I move it again I checked all the blocks for CS1...
  18. scottp

    SIC Speaker Impedance Curve for tone?

    So I was looking at the SIC's for the various IR's we have. I was very surprised to find factory preset #8 Plexi 50W, its SIC is heavily modified from its default curve! So that led me to ask the questions, are people doing tone shaping with the SIC? If so, fine tuning or major changes? Like...
  19. scottp

    Eye drops for dry eyes

    Looking for recommendations for eye drops. I am experiencing a bit of dry eyes lately. I do wear glasses, no contacts. Yes I'm over 50. Looks like there are a lot of products out there. What I found so far are drops with and without preservatives. Any recommendations? Hoping to find a safe...
  20. scottp

    PSA... EV PXM-12MP $50 off

    Looks like at Sweetwater they reduced their pricing by $50. Same at Musicians Friend. https://www.sweetwater.com/store/detail/PXM12MP--electro-voice-pxm-12mp-12-inch-powered-floor-monitor
  21. scottp

    Ibanez JEM7VP vs JEMJR

    Hey guys, I was poking around on Reverb the other day looking at Ibanez JEM777s and I saw this JEMJR that I really never looked at before. I thought it was a small scale size for youth or beginners. Any thoughts on the differences between the 2 models? Thanks!
  22. scottp

    Block Libraries

    Are Block Libraries exclusive to each model FM3, FM9, AX3?
  23. scottp

    Bug? Display above foot switch #2 problems...

    I have a new FM3T and just noticed that the font is being displayed off center. And on some presets I can see an additional vertical line on the right side of the display. As seen in the second picture. See attached pictures.
  24. scottp

    New Cell Phone needed

    I love a good deal! I am an Android guy, yea I hear all the flack coming my way... :D Wondering if anyone has a recommendation for a newer model Samsung Galaxy? Thanks!
  25. scottp

    True single coil but noiseless help

    My friend is looking for a true single coil pickup for a neck position on a Strat. But he wants it as quiet as possible = no 60 cycle hum/buzz. I know there is discussion on this topic, but I have no knowledge on this. What are some of the options for this? Thank you.
  26. scottp

    Happy Birthday!

    I got my son a new FM9T for his (32nd) birthday! He is graduating from an AX8 to the FM9T. Here we are going over some of the new features of the units. He is already quite impressed with the new features & functionality. It is such a blessing to have a son who loves music, love to play and...
  27. scottp

    New Input 1 Gain Parameter

    I'm looking for some clarification on this. On the AX3 Press, Setup > I/O > Input. Now look all the way to the right and see this. The fifth control. I checked the manual and it does not mention this. From the manual below. What exactly is this new control, and how should we set it? Thanks.
  28. scottp

    Nut Slots Cutting / maintaining

    Hey guys, how much tolerance do you allow when cutting nut slots so the strings slide smoothly? And more on wound strings? Thanks!
  29. scottp

    Clip on tuner - which one?

    Wondering what you guys are using. I'm looking for a fairly decent clip on tuner. Thanks.
  30. scottp

    Maton Acoustic guitars

    Anyone have any experience with these? Opinions on the pickup output for live performance? Thanks
  31. scottp

    What type of compressor for Acoustic

    I'll be using a Taylor 614CE into the Fractal, wondering what compressor you like for live acoustic guitar? Maybe some recommended settings? Thanks!
  32. scottp

    Belden cable for install

    Does anyone know the part number for a Belden cable for XLR runs? 2 conductor with a shield/drain, foil wrapped. This cable will be running in conduit. Thanks!
  33. scottp

    Gear storage outdoors

    I would like to see if anyone has any experience storing gear outdoors. Here is our application. We have a new outdoor stage for summer use. The plan is to build a lockable storage unit on the back side of the stage for a PA system and other gear. I do not yet know what this gear storage unit...
  34. scottp

    Help... No Dyna Cabs!

    AX3 1. Updated Fractal Bot 2. Download latest beta from first post 3. Backed up AX3 4. Installed new Beta 5. Drag cabs file into Fractal Bot 6. Installed Dyna cabs syx 7. Power down PC and AX3. 8. Refresh after firmware. I still don't / can't find and Dyna cabs. I even tried downloading the...
  35. scottp

    First time synth pad keyboard sound

    Hey, I have a case where I need to be able to fade in (EV-1) a synth tone or pad for a song we are doing this week. It is just a low E note that I'll need to fade in and out. Can someone point me to a good sound that will work for this application? Hopefully the tone will have a bit of...
  36. scottp

    Today's Rig

    What a joy it was to play this setup today! The IEM was dialed in perfectly. My monitor had enough volume to add feedback as desired!
  37. scottp

    Running 2 amp blocks to avoid gaps while changing channels

    Can someone describe how to set up the 2 amp blocks to achieve gapless switching. In my case I'll be using the Herbie amp in both amp1 and amp2. I will be using the 4 channels in each amp to get different levels and tones. Thank you.
  38. scottp

    Affordable Stereo In Ear wireless system

    This morning I happened to catch a YT video for this new product. Has anyone tried this product yet? I checked the Amazon reviews, at this point it looks like ~60% negative reviews. Or do you know of a good low cost stereo wireless IEM system?
  39. scottp

    Fractal Apparel

    For my job, when I'm not wearing a hard hat, I always wear some type of baseball cap. I wish Fractal offered more choices. I have had the adjustable hat for years. It is kinda thin and flimsy. So I find myself not wearing it. If you think of, for example, a Nascar hat, those are top quality...
  40. scottp

    Help not connecting to PC...

    I am trying to work off our upstairs PC. Win 11 and the FM9 is not recognized. My FM3 connects just fine, so the cable is not the issue. I tried uninstalling FM9-Edit and reinstalling it. I am not trying to use the beta version for the FM9. Its on Firmware 4.00, USB 1.01. Downstairs the FM9...
  41. scottp

    Sneak Peek

    Look what showed up this week, my next build! Body from Warmoth. 1 piece swamp ash, I got to choose the flame maple wood for the top. Tummy, forearm & neck heel contour cuts. Cherry Burst over in satin.
  42. scottp

    PER-PRESET METHOD 2: THE PLACEHOLDER FUNCTION

    Wondering if anyone is using this? You set up all the blocks you want to use when you create your own presets and assigning the foot switches accordingly. How do you like it? Pros / Cons?
  43. scottp

    Cooper Carters FM9 Live Tone Tour

    Wow, I just saw this... Great stuff! I would like help creating the Clean big ambient tone he demonstrates at 4:54. Amp is a Bandmaster, but he doesn't give any other detail on what he uses for effect blocks. Thanks
  44. scottp

    How would you describe the feel of this amp Vibrato Lux

    003 - VIBRATO LUX — Brownface Fender Vibrolux, bias tremolo, Eternal Love drive. Previously named: "BROWNFACE". I played with this model for the first time this week for about 3 hours WITHOUT compression or drive, using the factory preset. The tremolo was off while I was auditioning this...
  45. scottp

    Simulate a Treble Bleed

    Is it possible to Simulate a Treble Bleed while using a Brit 800 amp? It's lovely with the guitar on 10 but is too bright with the vol rolled down to 3-4. Looking for ideas in Fractal land. Something I can automate, so as the input signal get lower, the treble get lower at the same time.
  46. scottp

    Modifiers per channel, Sweet!

    IDK if it was just me, but the last time I was trying to use a modifier to control gain, it seemed to be tied to all channels in the amp block. Today I am creating a new preset and came to find out, at the top of the Modifier window, you can choose which channels of the amp block will be...
  47. scottp

    Tone Claw Tremolo

    Have any of you seen, used or heard about this product? I am just seeing it for the first time today...
  48. scottp

    Strat Tremolo plate

    Does anyone know if a replacement Strat trem is available with 2 7/32 mounting screws, BUT 2 1/16 string spacing. Looking for a black one if possible. Calling @Andy Eagle :)
  49. scottp

    12 String preset

    Hey guys, do you know if there is any preset that simulates a 12 string at all? Thanks
  50. scottp

    Gain Tone and Feeling

    So I have been working on a preset for this week's gig. We use IEM on stage. At home I dialed in 4 scenes each with a different amount of gain, using 1 amp. I worked hard to get the EQ and gain just right for each scene, comparing the tones to the original recordings. I did this using the same...
  51. scottp

    Guitar finishes / types of finishes

    I have been thinking about this since @Andy Eagle went on to explain how the MIM Fenders use a plastic coating for the body finishes. Today I did some research trying to find out how much you will have to pay US dollars, to get a lacquer finish. Player Strat $849 Gloss Polyester Vintera '50s...
  52. scottp

    Finish question

    We have all seen finish checking on an old LP with a lacquer finish. Are Polyurethane finishes prone to crack, check like lacquer does?
  53. scottp

    Mojotone Vintage taper pots

    Has anyone tried these pots in a guitar? Custom taper 7% tolerance https://www.mojotone.com/Mojotone-Vintage-Taper-CTS-250K-Guitar-Potentiometer-Solid-Shaft
  54. scottp

    Potentiometer Value

    250K or 500K Which pots to use for Seymour Duncan Hot Stack for Strat? 3 pickup set in a Strat.
  55. scottp

    Factory Presets Cab Type Information

    Is there an on line resource that tells what IR's the factory presets use?
  56. scottp

    Seymour Duncan Little '59s for a Tele

    Has anyone had any experience with these pickups? Thanks
  57. scottp

    WIN USB Driver 5.50 installation. RESOLVED

    I got it sorted out. Windows USB Driver Zip Archive – September 8, 2022 – Version 5.50 Windows 10/11 driver required for USB Audio and MIDI-over-USB (Fractal-Bot and FM9-Edit)
  58. scottp

    Filling a nut slot

    I have a few nut slots that are just a tad too low. For a Tusq nut, is it okay to use real bone dust to fill the slot? What type of solvent/cleaner is safe to remove any left over lubricant from the nut slots before I begin. Thanks!
  59. scottp

    Desktop Monitors

    I'm looking for a pair of Desktop Monitors, specifically for jamming along with YT, CD,s or streaming music. (These will be going in our family room. I have other monitors for above 85DB in my music room) Clarification: The computer in the family room already has a pair of basic speakers for...
  60. scottp

    Bigsby Lubrication question

    What is the best lubrication for a Bigsby tremolo system? (not talking about the string saddles) This is my first guitar with this type of trem. The 2 rotating shafts are main points I'm concerned with. Thanks! Paging @Andy Eagle Part 2: This guitar came with a fiber type washer to sit below...
  61. scottp

    Help me find factory preset that uses a synth, the FC-12 as....

    IIRC the FC-12 is set up to select notes of the scale. Which allows you to solo over the synth notes. Thanks!
  62. scottp

    Best inexpensive wireless for guitar

    I already have a nice Shure set up, so I'm looking for the cheapest or best bang for the buck wireless. I would primarily use it to eliminate cables across my studio floor. Thanks!
  63. scottp

    DuckDuckGo

    Is anyone using this as their search engine? Your thoughts? I just tried it, and now I can't log into my Fidelity account! I searched their site for help and contact, nothing easily found yet.
  64. scottp

    Volume pedal issue

    I added a volume block to the grid, set up and calibrated my EV-1. It seems as if this is not controlling properly. I have the vol block just before delay & reverb. When i pull the volume to 0, i get no reverb or delay trails. Any ideas?
  65. scottp

    Is there a comparable product to Big Bends Nut Sauce

    I have a small tube, its almost empty. Looking for a possible alternative. What have you tried and like? I don't want to use pencil lead. Thanks.
  66. scottp

    Name of Block shown in the Library window

    It would be really helpful for the Block Name to remain in the Library window, so we know which version of the block we are using. Thank you.
  67. scottp

    Is the FM9 being delayed due to a chip shortage?

    Just wondering. Thanks.
  68. scottp

    Help me find a picture on the forum of a Strat...

    So about a week ago I saw a picture of this strat. I can't remember which thread I saw it in. It has (to me) a very unique finish on it. In the picture I saw, It was laying on its back. From what I recall, satin finish, figured flame top, Light to dark brown, maybe a black pickguard. To me that...
  69. scottp

    A little less Treble

    I have a Tele that I recently built. I want the bridge pickup a little less treble. I really like the neck pickup with the tone full up. I know 1 solution is a dual concentric pot. What other options do I have?
  70. scottp

    Musicians Friend

    Wow! Over the years I have bought my fair share of gear from MF. I live in the US. I called today to place an order, and to my surprise MF has outsourced their call center to the Philippines. Wow.
  71. scottp

    Latest Version of Yeks Guide to the Fractal Audio Amp Models?

    I can find revision April 2017 for Quantum 7.02, Is there a newer version? Thanks
  72. scottp

    FAS Crunch (Plexi) MV location

    I'm trying to learn what the difference will be if I move the master volume location form Pre-PI to Post-PI. What to listen for etc. I have done quite a bit of searching... no success. Plus I am open to hearing your thoughts on this. Thanks!
  73. scottp

    Gibson or Epiphone

    Comparing these 2 instruments. The Epiphone is $729 the Gibson is $5499. What are the major differences? Can you justify the cost difference? What do you say? https://www.musiciansfriend.com/guitars/epiphone-les-paul-custom-electric-guitar/l72578000001000...
  74. scottp

    Saturday Night Specials

    @State of Epicicity I saw you commented on these SD pickups. In my Gibson LP I currently have a JB in the bridge. I find it a little harsh even playing with the pickup height. How do you like the SNS PU? What tone cap and pot values are you using? I plan to rewire it to 50's wiring. I just...
  75. scottp

    Tremolo springs a ringing

    Have you ever noticed on a tremolo equipped guitar how much you can hear the springs vibrating when playing it acoustically? I have a PRS Tremonti that I really like. I was playing it at fairly quiet volumes plugged in. After playing some chords I muted all the strings, and the tremolo springs...
  76. scottp

    Case for FM9, FM3, FC-6, FM3 & FC-6, FC-12, and AX8 Yea!!!

    I have found a great case that is lightweight, strong and protective and versatile. The SKB 1SKB-SC2111 I have been using if for a couple years now, finally getting around to sharing all of its goodness.
  77. scottp

    Capo, the real thing you use on a guitar

    Looking for suggestions and what you are using for your acoustic or electric guitars. I have a few 20 year old Shubb's that work well. I have an adjustable tension/clamp on Planet Waves PW-CP-05 that I like a lot, but seems to be discontinued. I really like the adjustable tension quick clamp...
  78. scottp

    Blending 2 amps, Volume pedal not able to silence amp 1 100%

    So I have everything working well, except I noticed sound coming through the clean amp 1 when the volume pedal is full in the toe position. I am expecting the amp 1 volume to be zero here. This example is similar to what Cooper Carter showed in one of his videos recently. One EV-1 blending amp...
  79. scottp

    Mens 50+ Multivitamin

    Hey guys, Is there a multivitamin you take that you would recommend? Not looking for an old time generic one a day that someone's grandpa use to take back in the day. Thanks.
  80. scottp

    Waitlist confirmation emails

    Am I the only one? To set the tone, I am not mad. Just curious about this. I Joined the waitlist on Sunday August 29 2021 7:22:48AM. I didn't receive any type of confirmation. I reached out to Fractal 2 more times and got a reply on 9/29/21. They said that they received my waitlist request and...
  81. scottp

    PSA 20% Off Cables for Fractal products

    https://btpa.com/labor-day-sale/fractal-cables/ https://btpa.com/labor-day-sale/
  82. scottp

    Wiring for a Les Paul

    Which wiring do you prefer to go with in a Les Paul? 2 pickups, 2 volume, 2 tone, no coil tapping. I currently have a Gibson LP Goldtop Classic 2004. Some years back I put 500K pots in it and SD JB in the bridge & SD Jazz in the neck. Today I find the tone of the bridge p/u harsh or a bit...
  83. scottp

    Plexi cleaning up with volume knob

    Is there one amp model that does this the best? Cleans up really nice when you roll your guitar volume down. I want to create a new preset with a Plexi as the amp. Please tell me the exact model name in the unit. Thanks!
  84. scottp

    Ball end of string stuck in trem block

    When changing the strings, I can't push the strings through the block. Any tips on fixing the root cause of this? The tremolo block is a Fender MIM from around 1996. Thanks
  85. scottp

    Not a Bug OMG15 not working

    @BryantP This is to confirm that even with this latest file, the problem still exists. The top row of switches for presets 6 through 10 all display the same preset, even with bank size set to 10. https://www.fractalaudio.com/downloads/firmware-presets/fm3/omg15/Fractal-Audio-OMG-15.zip
  86. scottp

    ToneWood Amp

    Hey, Has anyone used or installed a ToneWood amp in an acoustic guitar? How did the install go? If you tried it, what was your impression of it? Thanks!
  87. scottp

    NGD Roller bridge needed Gretsch

    My son just bought a new Gretsch Streamliner G2420T in Red. He is having some tuning stability issues. I told him 2 things we can easily do are... 1. Locking tuners 2. A roller bridge. Anyone have any recommendation for a roller bridge for this guitar? I don't know if the bridge is just resting...
  88. scottp

    Ghost Notes on Preset 006 Top Boost

    Anyone else noticing the ghost notes? New factory presets, latest Cygnus in use. When I play the G string at the 7 - 12 frets it is most noticeable then. I have all other effects off. What can we do to eliminate that weird sound tone?
  89. scottp

    TV YouTube ... trying to log back in PITA!

    Excuse me, but what a PAIN in the ass! We had a short power outage 2 days ago. Now youtube TV wants me to log back in with another device first. I have 2 accounts (uses 2 different email accounts) One I can get to work on my desktop only. The other one I can't get to work at all, neither at the...
  90. scottp

    Scenes

    Is there a way when you select a preset, that once it loads, the view displays scenes?
  91. scottp

    Problem with switch action

    I am fairly good at programming the 3 switch functions using FM3 edit. I am trying to program Layout 5, View 3, switch 1 to be Tap = scene 7, Hold = back to layout 5, view 2 (access to scenes 4,5,6) When everything looks to be programmed correct, when I tap switch 1, it dumps me at Layout 4...
  92. scottp

    Building my first Tele (Warmoth)

    So... I'm building my first Tele. As far as the hardware goes, do you like to get a kit that contains everything, or get each piece individually? I'm all ears for resources and recommendations. The body is black Korina.
  93. scottp

    Need recommendation on a Compressor Type for Taylor Acoustic

    So I'm building a simple preset for my Taylor Acoustic 614CE, has the Expression System in it. Looking for a nice pure tone with gentle compression. Playing live this weekend, I will be strumming some big chords balanced with picking notes all while using a pick. I would also appreciate any...
  94. scottp

    Shipping with USPS... Need to ship a guitar

    Wondering if any of you have had good luck shipping a guitar through USPS? I know the deal with UPS & FedEx they have been my go to for many years. Only looking for feedback for USPS. Thank you!
  95. scottp

    FM3 Firmware Version 3.02 and beyond (OMG9 VS FM3 Only)

    Now that the layout called OMG9 is being included with the latest beta, is there going to be clear direction given on how to go from FM3 Only to the OMG9 for use with the FC-6?
  96. scottp

    Locking Tuners for a Les Paul

    What do you guys like and recommend for locking tuners? A direct fit would be real nice. Gibson LP 1960's from around 2000.
  97. scottp

    Mooer-Shroom Footswitch Hat Toppers

    Hey guys, For those living in the US, where did you purchase those clear Mooer-Shrooms footswitch toppers? Thanks.
  98. scottp

    IR in the III for use in AX8

    Is it possible to use a factory IR in the AX3 and somehow get it to work in the AX8? Thanks
  99. scottp

    Parallel routing levels help

    I am running a reverb in serial on the grid. I have a Plex Delay right above it, in parallel, and a Delay block below it in parallel as well. Since I added the 2 parallel blocks, my output volume has jumped up. I thought I read somwhere to set the parallel blocks to -6.0 for level.? Is there a...
  100. scottp

    [implemented] Block name present in Block Library window

    When we choose a saved version of a block, say a delay pedal as an example, that the name we give it, once selected and saved would continue to populate the blocks library window. (So we know what we are working with) This wish is for all Fractal products.
Back
Top Bottom