Search results for query: *

  1. sk8te4free7

    Scene+preset=bank?

    This worked!! Thank you! I discovered the FC wasn't sticking to the layout i set it to (layout 7) so i setup a function on button 5 (hold) to switch between layouts. Is it me, but was the feature to have the rings on/off when selected/pressed been removed? or does this change per layout selected?
  2. sk8te4free7

    Scene+preset=bank?

    so basically i'm trying to have every 4 presets (1 through 4 - guitar 1) guitar 2 (5 through 8), guitar 3 (9 through 12) and by pressing the "bank up/down" i want these presets to show on the bottom row and the scenes to strictly be on the top row on my FC. this configuration has worked for me...
  3. sk8te4free7

    Scene+preset=bank?

    So i've got this screen in the preset and i'm confused on whether or not i have to change the primary preset under "Functions"? that's where i'm stuck
  4. sk8te4free7

    Scene+preset=bank?

    i actually use banks per guitar(s). so rather than have 1 preset for one guitar - both use different pick ups and are passive/active this has allowed me to create presets with scenes for each specific guitar.
  5. sk8te4free7

    Scene+preset=bank?

    If this has been answered: link me :) Can anyone guide me on creating 5 (or 10) preset banks+Scenes? When i used to use the AFX2 i had 10 banks total with scenes and when i pressed up/down the presets were made for each of my guitars. All 10 were specifically presets and a row of button in the...
  6. sk8te4free7

    Setlists and FC-12?

    Thanks. Copying and pasting. Much appreciated!!
  7. sk8te4free7

    Setlists and FC-12?

    sorry if this has been answered but i can't find this info anywhere else. Can anyone guide me into creating 5 preset banks? When i used to use the AFX2 i had 10 banks total with scenes and when i pressed up/down the presets were made for each of my guitars. Now, i'm struggling to find this...
  8. sk8te4free7

    Recording a wet & dry signal at the same time

    Sorry for the delay, it seems that option 5 is my best bet. Now, i've had to adjust a new aggregated I/O within my DAW and finally have my ins/outs discovered. Problem solved. I'm buying my own axefx3 now. I appreciate you guys' help! SOLD! :D
  9. sk8te4free7

    Recording a wet & dry signal at the same time

    Thanks!! I’ve read the instructions on this thread but I can’t find anything telling me the settings I need to adjust within the axe. My routing consists of connecting through the analog/XLR method. As I do want to use an external drive (I’ve edited my preset for this purpose via image) and...
  10. sk8te4free7

    Recording a wet & dry signal at the same time

    In regards to the complex option, is there anything that needs to be adjusted within a preset or global in/out setting?
  11. sk8te4free7

    External Stereo Effect

    Hey guys, i'm at the edge of having the exact setup as my axefx2 in terms of running my OD through loop. Now, i'm encountering a problem with hearing both wet in my out2 DI signal. my DAW is detecting the wet/DI signal path i've setup using a cable method for tracking into my interface's inputs...
  12. sk8te4free7

    External Stereo Effect

    As a new user (borrowing the unit), this was the preset that was premade and i copied what was written in the thread + what the youtube video demonstrated. The cable connections were plugged correctly - unintentional i guess. It worked!
  13. sk8te4free7

    External Stereo Effect

    Where would the mixer block need to be placed? I can see all meters detect noise signal but there’s absolutely no tone difference. I’ve also followed the steps in a YouTube video that indiciaria using two pedal outs (I’m using a precision drive). The cable setup is identical and still nothing...
  14. sk8te4free7

    External Stereo Effect

    hey guys, I’ve done this exactly as written. I don’t hear a difference in my tone when turning on my OD pedal in the chain loop described. The volume is up, I checked my I/o levels and seems to be high enough to have the signal recognize what I play. Is there anything specific I’d have to change...
  15. sk8te4free7

    FX Loop + wet/DI bleed?

    I was under the assumption that the output 2 was the dry signal. I'm plugged into my interface using the out into the interface. I get the wet and dry signals on the outputs 1/2. And now that i've checked, the output 2 is on ECHO output 1. I'm using the fxloop to engage/disengage the OD...
  16. sk8te4free7

    Good time or terrible time to buy Axe-Fx II?

    Buying any fractal product is NEVER a regret. Sure, the newest model is and will always be the way to go because most presets are created for that specifically. But, there are software that'll convert those newer presets to the previous models. Everyone is happy with what they have currently...
  17. sk8te4free7

    FX Loop + wet/DI bleed?

    Here's the preset. I'm dealing with high gain pedals. This also applies for most if not all presets i have but if i can manage to deal with one, i'll repeat the same step for the other presets. "DI out" = Direct Input output. From my understanding the output 2 R is also essentially the Dry...
  18. sk8te4free7

    FX Loop + wet/DI bleed?

    For the past few years i've had some confusion on understanding the fx loop and the DI signal through the outputs of the axe. I've been using two OD pedals in the fx loop but there have been a few patches (stock and custom) that has the wet signal coming out of the DI out. Can someone assist...
  19. sk8te4free7

    Aggregate device: axe2+Interface+DI box?

    Hey guys I need some assistance with my new interface setup. My current setup: MacBook, pro tools 11, Aggregated - axe2 via USB and Motu via FireWire for processed signal and DI simultaneous tracking. ive recently just upgraded interfaces from the presonus firestudio to a motu 896mk3 hybrid...
  20. sk8te4free7

    DI distortion?

    I'm using the horizon device OD. It works fine now but it sucks because i wanted to just plugin directly with the pedal in front of the axe. The DI just happen to record to and makes sense as to why. I have the pedal connected with a 12v ac adaptor too
  21. sk8te4free7

    DI distortion?

    It was the pedal going directly to the front of the axe. my chain now (that eliminated the distortion in the DI signal) cable to guitar to INSTR. Then, fxloop in/out using the physical pedal.
  22. sk8te4free7

    DI distortion?

    For tracking purposes i listen to the DI to make sure i am playing cleaninly as possible (just because i am a perfectionist in the slightest way) I found the problem and it was indeed the physical pedal i have in my chain. Do you recommend i just use the fxloop to avoid recording the OD in...
  23. sk8te4free7

    DI distortion?

    I have aggregated my interface (FireWire and axe (usb) in the DI track on my DAW the gain signal is so low that it seems as if it’s below negative dB. Not the problem. The problem is When I increase the volume to hear the DI and solo the DI track that’s where I hear the distortion over the clean...
  24. sk8te4free7

    DI distortion?

    I've recently come across having this problem for the first time in almost a decade using my axe2 XL. I've adjusted the in/out on my DAW and also followed by the re-amping wiki page but i cannot seem to be getting a cleaner DI signal. My guess has to be because i am using a pedal in front of my...
  25. sk8te4free7

    Metal on Q.9.02

    This is a recent video i decided to be apart of simply because i REALLY liked the tone i was able to achieve using a drive pedal through the FXL block. I felt it fit the song and style of music just right. I'm still adjusting the presets on a daily basis to make it better one way or another...
  26. sk8te4free7

    FXLoop = system mute? (Q8.02)

    My next question is, what I/0 would you best recommend for inputs/outputs to eliminate high feedback (when the drive isn't set too high within the pedal/amp gain knobs)?
  27. sk8te4free7

    FXLoop = system mute? (Q8.02)

    Well, now i feel like a complete JACKASS. I switched the cables once again, moved the output level 2 and the meters on the out2 were there and audio came out. Let this be a lesson for a dumbass with allergies and trying to figure out technical difficulties that were EASY to fix. The fact that...
  28. sk8te4free7

    FXLoop = system mute? (Q8.02)

    My cable chain is as follows: -Guitar/INSTR + -Pedal input to OUTPUT 2/L -Then Pedal output to INPUT 2/LMono Again, i've never had this issue before until i used the front panel to save the edits while connected via Axe-edit
  29. sk8te4free7

    FXLoop = system mute? (Q8.02)

    Yes, the output 2 knob and pedal are turned up, the higher i would increase the output 2 level knob the more hiss i would get. i've been using this exact setup for over a year or two. plugging in and out constantly and i've NEVER had this issue before. It was until wednesday that I was...
  30. sk8te4free7

    FXLoop = system mute? (Q8.02)

    Update: I notice that when i disconnect the cable from the pedal out to Input 2/L (with FXL block enabled) audio comes right out enabling the left input in front of the axe to have audio. I've trade using a different cable and plugging it back in, the audio gets cut off.
  31. sk8te4free7

    FXLoop = system mute? (Q8.02)

    could it be possible for any electromagnetic field to make this into a problem? i'm trying multiple cables and i get weird static from putting the pedal directly into the front input.
  32. sk8te4free7

    FXLoop = system mute? (Q8.02)

    this is with any and all presets as soon as i insert the FXL block.
  33. sk8te4free7

    FXLoop = system mute? (Q8.02)

    Yes, even when they're unplugged i get no audio while the fxL block is enabled. It's weird yet frustrating.
  34. sk8te4free7

    FXLoop = system mute? (Q8.02)

    Axe-FX XL This is the weirdest situation i've ever encountered with my axe. Just yesterday as i was editing my presets via axe-edit - as i was renaming through the front physical buttons - hitting "store" the entire preset went dead silent. All other presets that either have the FXLoop block...
  35. sk8te4free7

    Bug? Volume reduction Q. Rev. 8.0

    After installing my update, after a good 15 minutes of playing nonstop sound, i use my MFC to switch presets and all is well up until my volume drastically drops. Am I the only one experiencing this? i've installed the firmware twice. Should I try a third time? Prior to being on Q. Rev. 7.02 i...
  36. sk8te4free7

    High gain OD pedal+FXL block

    I am beginning to understand what you mean. I've adjusted the gain and lowered some values to some blocks and it does sound more fuller and punchier. I'm just trying to achieve exactly what you said - clarity, punchier and dynamics. I've been trying to get a "studio" quality live patch but...
  37. sk8te4free7

    High gain OD pedal+FXL block

    it sounds identical to when i'm using my power amp
  38. sk8te4free7

    High gain OD pedal+FXL block

    Even after removing the drive block, the drive on the amp and external pedal - the gain is reduced almost sounding a bit dried out. I've lowered the gain on everything (not saving the adjustments before uploading the file) and the sound is just dry and low gain everything
  39. sk8te4free7

    High gain OD pedal+FXL block

    here's the preset.
  40. sk8te4free7

    High gain OD pedal+FXL block

    I'm using my power amp with a passive 2x12 speak cab. It doesn't do it with other stock presets but with the preset i've created to use a OD pedal via FXL block, i get a lot of gain and this sound comes out. Can't figure out what settings to use on the noise gates
  41. sk8te4free7

    High gain OD pedal+FXL block

    i've having this issue for several years now & i can't seem to find a solution as to why after i palm mute chords, there's a high pitch unwanted sound at the end of the sound. I've already done MANY adjustments to both input gate+noise gate block in my chain+ a comp block. I've decreased so much...
  42. sk8te4free7

    [NOT A BUG] Q 7.0 Up D-pad button glitch

    Actually, come to notice... it happens on a previous version.
  43. sk8te4free7

    [NOT A BUG] Q 7.0 Up D-pad button glitch

    I have noticed that ever since i upgraded to Q7.0, whenever i manually pressed on the Up button while editing/navigating through presets that it would not move to the next preset. If i press at least 3 times it suddenly moves up and skips a preset or two or moves fast during the block editing...
  44. sk8te4free7

    Beyond the stock preset #

    I have a question in regards to the standard stock preset which is 386? When i'm on preset.. say.. 399 (beyond the stock preset count), i load up my DAW, have in/outs ready etc or even sometimes when i have my power amp on to use with my cab this happens, the volume isn't present. I have to...
  45. sk8te4free7

    Audio question

    alright i'll give it a try asap!
  46. sk8te4free7

    Audio question

    it's fresh out of the factory the guitar, barely two weeks old so i'd say no they're fresh
  47. sk8te4free7

    Audio question

    aright guys so here's a weird situation i'm confused about.. is it possible that after unplugging and pluging back in a guitar (specifically a strandberg bodon 8 string with EMGs) the audio goes from regular volume to almost no audio coming out from the axe. this time when it happened, i turned...
  48. sk8te4free7

    Audio question

    I remember when it first happened, i turned off the power amp and it was the same thing. the volume was close to nothing and then it randomly came back. When i turned off the axe the second time this happened, it was the same thing as it happened the first time. So my question still remains as...
  49. sk8te4free7

    Audio question

    the input meters still litup normally on the axe when it happened. No lights turn on when using the power amp and i need to try the headphone jack asap to figure out what i hear. I am using 1/4 speakon cables from power amp to frfr matrix speakers and even then i don't really touch them. i...
  50. sk8te4free7

    Audio question

    i have not yet since this weird incident has happened only twice (ever) of owning the XL. This did happen before with volume fluctuation when i had the GT800 power amp though. Like i've mentioned before, all cables, volume adjustments and settings i've had were never touched the entire time...
  51. sk8te4free7

    Audio question

    After it shuts off for 40 minutes and then turning it back on the signal is exactly the same. tone, volume etc. I've never had any issues with my axe or power amp before. It just surprises me how the audio just went out on it's own after leaving all cables untouched and connected properly. I'm...
  52. sk8te4free7

    Audio question

    I didn't have anything connected to my computer. It was just axe, power amp, mfc and guitar. Nothing fancy going on. I've had this setup for over a year and i've never had this problem.
  53. sk8te4free7

    Audio question

    i've used other stock presets to see if it occurred again and it doesn't. I've routed the volume peal only to my custom presets and when i switch to a stock one, it doesn't affect anything within it. No global settings used and as far as muted settings go, i wasn't touching anything in the axe...
  54. sk8te4free7

    Audio question

    I've had my setup the same exact way for over a year in terms of the MFC-101 Mk 2 being used with Ethercon cable and two TRS cables for my mission expression pedal. I just use the Exp. pedal for volume purposes but at the time of the audio cutting out i never used the volume whatsoever. Simple...
  55. sk8te4free7

    Audio question

    i almost never use the headphone jack. I've used a mixture of created, stock and edited stock presets to make my own. And so far it's only happened on edited stock presets and the signal does come back for good after a few seconds of restarting the system.
  56. sk8te4free7

    Audio question

    I've experienced this twice now on FW Q2.04 & now that i've just updated to Q3.02 where my audio has cut out completely from normal bedroom level to complete silence after switching from one preset to another using my MFC. I've turned off and back on the axe and i still had no audio coming out...
  57. sk8te4free7

    7 string Q 2.4 Friedman HBE

    Just another simple song idea using my ProTone Bulb signature pedal with an iBanez S Series 7 string. My mixing and mastering isn't great but it's definitely better than what i've shared years ago lol all stock plugins within Pro Tools 11.
  58. sk8te4free7

    MKii beyond Preset 384?

    thanks for the feedback guys! I think i have an idea on what i'm thinking of doing.. I might end up just having the first 384 presets as my own and literally move everything else over to the rest of 385+ space lol it'll be a tedious task i think.
  59. sk8te4free7

    MKii beyond Preset 384?

    Is there a way i'm able to go past stock preset 384 on my MFC-101 MKii using my Axe-fx XL? I'm not able to go beyond that number without it jumping back to preset one, the only way i'm able to go past 385 is if i manually preset up on the Directional keys. Any suggestions?
  60. sk8te4free7

    Mario 64 - "Underwater-sounding" AxeFX patch

    sounds beautiful man, super badass and nostalgic lol
  61. sk8te4free7

    (Metal) Quantum 1.01

    it's a work in progress, i'm still not good at mixing and mastering but for demoing purposes it's easy on the ears!
  62. sk8te4free7

    Power time

    now i'm concerned once again lol
  63. sk8te4free7

    Power time

    Thanks for chiming in guys, i'm always concerned with my electronics although i must admit that i turn power cycle it on and off CONSTANTLY when not in use just to avoid having high electricity bills. I do play on a daily basis but 9 hours straight just gave me a positive outlook on how long...
  64. sk8te4free7

    Power time

    It's been about a year or so that i last asked about the amount of hours the axe can be left on for, and today i've left my axe on for about 7-8 hours straight while in use for tracking a song with my guitarist. I definitely feel happy about the performance. No lag, no power outage, consistent...
  65. sk8te4free7

    Ambient FW 18

    So far i think this is the best mixing/mastering i can do for pure demo purposes. Thank you guys for listening :D
  66. sk8te4free7

    Axe Edit Comunication Error when using Pro Tools 10

    You can only have one or the other running at the same time, since PT uses the inputs and outputs it'll use most of its CPU % of the Axe while the AE will try to use some CPU % at the same time so it'll be a problem. That's just the easiest way i can think of that won't allow them to be used at...
  67. sk8te4free7

    Cab IR starting point

    I wonder if there is a diagram where it shows an image drawn of a speaker. Have numbers pointing out in numerical form where each mic was placed in front of the speaker so we wouldn't have to guess by ear why each .wav files sounds a certain way but we can visually see roughly where they were...
  68. sk8te4free7

    Cab IR starting point

    Awesome, thanks for the input guys. What i ended up doing was mashing one factory cab with the cab packs i've purchased and i'm hearing a tone difference.
  69. sk8te4free7

    How can I use one volume control for stage, the other for PA

    Come to think of it.. Since i use my FXLoop with a physical overdrive pedal, i don't touch the Out2 knob. I use a power amp that controls my stage cab (out1 knob does increase in volume but can be controlled by power amp), while out1 is connected to XLR Out1 for the FOH. Very basic and straight...
  70. sk8te4free7

    Cab IR starting point

    I have a better understanding on how to approach the IR's now. I do appreciate the feedback guys. I really do! In regards to the cab pack by fractal, i have cab pack #5. If you guys have this pack, which file # should i try to test first? From what i've heard so far on my end is that there is...
  71. sk8te4free7

    How do I get this clean sound?

    he might be using a spring reverb also and pickups on the guitar do count in this case i would guess.
  72. sk8te4free7

    Cab IR starting point

    Ahh aright, i'm getting a better idea as to what you're referring to.. So as i'm trying different files left and right in the scratch pad, i must have my amp and EQ blocks setup to my needs and tweak as i change the IR samples?
  73. sk8te4free7

    Cab IR starting point

    Hmmm, i might be overthinking the idea of having so many IR captures for one speaker. I get the different mic positioning and different mic IR's but the speakers... they're confusing me for some odd reason lol
  74. sk8te4free7

    Cab IR starting point

    As i'm very new to the idea of purchasing cab IR's. I have bought at least one speaker IR by ownhammer and one fractal cab pack but i don't know where to start. I've experimented with most .wav files included in each purchase but in conclusion i can't get a good result as to the tone i'm to...
  75. sk8te4free7

    Something new

    This is way out of topic but still in regards to music... I literally found this device on facebook minutes ago and it sounds extremely promising when it comes to the general idea. i've always wished i had some device that could do this and look at this... they've started it already lol Have you...
  76. sk8te4free7

    Prog. Instrumental

    Thanks for the feedback guys. We know what to look out for for the remaining songs in the EP!
  77. sk8te4free7

    Prog. Instrumental

    Hey man thank you for the feedback! Definitely will keep that in mind.
  78. sk8te4free7

    Prog. Instrumental

    Hey guys, so over the past year or so my band finally had the chance to track guitars while being at home. After all guitars were done, the stem files were sent to a studio to get mixed and mastered. One guitar was tracked using the axe and the other via line 6 pod. Everything went well and this...
  79. sk8te4free7

    new song / ambient video game music

    This is what i love to listen to. REALLY good stuff man.
  80. sk8te4free7

    Matrix Amps?

    In my personal experience... Both power amps are badass regardless of which you decide on purchasing. Only difference between them is just the output bridge mode feature in the GT1000FX which most of the time isn't really needed (not for me at least). I personally have the GT1000FX because i...
  81. sk8te4free7

    How To Record Dry + Reamp (In Realtime) Using SPDIF (Pro Tools 11)

    This is really helpful.. Now how do you do this to track guitars/bass using an Aggregated device with two interfaces and USB+firewire?
  82. sk8te4free7

    New Axe FX II XL Owner - struggling to get USB audio working in Sonar

    to keep it as simple as possible, use the axe via USB, set up your I/O to axe-fx in your DAW and leave buffer size to default if possible i never touch the buffer so i get no latency. Maybe just use the axe as the interface and virtually control the volume of each track (in your DAW) while the...
  83. sk8te4free7

    Axe Fx 2 XL USB recording tips HELP!

    Do what Sir Yek mentioned. That could be another starting point then retry what you've done minus the buffer size change. i leave mine at default, i always connect via USB and speaking of monitoring i meant just connect the XLR cables directly from output 1 & 2 then directly into your monitors...
  84. sk8te4free7

    Axe Fx 2 XL USB recording tips HELP!

    What i do is set up the I/O in logic to axe fx, make sure internal monitoring is set to off (that's if you have both Left and Right XLR's connected to the axe directly as your monitoring source), If you're looking to do reamping refer to this video. It even explains what i've mentioned already...
  85. sk8te4free7

    New To The forum..A Quick Pro Tools Question!

    I use a separate interface just for audio monitoring and i use PT to monitor the audio of the axe but i use Aggregated device meaning both interfaces used under one setting (or something like that).
  86. sk8te4free7

    Just Updated Axe FX 2 with MFC connected

    For many years i've always updated with the mfc connected and i've never had a problem. I find it a bit odd lol
  87. sk8te4free7

    MFCmk2+XL Bank D usage

    Thanks for the direction. I've looked into it and tried setting it up to my best understanding but i've yet to figure it out entirely. I'll get it eventually if not i won't even bother using Bank D :( lol i'll just use it as a back up preset
  88. sk8te4free7

    MFCmk2+XL Bank D usage

    Can anyone help me "map" presets on the mfc? I want to be able to leave my preset where i left off on bank D and still select (IA button 1, 2, 3 etc) presets where they are saved? Is this possible?! I've spent a long while trying to understand how to do it but i can't understand why it doesn't...
  89. sk8te4free7

    FW: 15.03: Metal, DEAL WITH IT :)

    The axe is a versatile tool. Good music is Good music. I wrote another METAL song idea for a friend's video. I did my best to mix this but it's just a demo. Enjoy :D :D lol
  90. sk8te4free7

    Metal idea

    FW 15.03 Metal idea Just an idea i made for a friend that will be using this for a video he's editing as a backing track. The drums are tough to mix for me. Still learning as i go but this is just for shits and giggles lol Enjoy :D
  91. sk8te4free7

    Power conditioner, yes or nay?

    Yes, you'd have all your unites on with a master switch. No brainer, get one.
  92. sk8te4free7

    Popping noise in scenes.

    This happens to me BUT only when i have a clean preset with reverb and delay on, then i switch to a rhythm high gain preset and i hear like a faded "boom". Spillover is turned off and all.. it's weird
  93. sk8te4free7

    XL + GT1000FX + FR212 = Awesomeness!!!

    You & i both!!! I've yet to use my FR212 in a live situation but i've only gotten the chance to practice with my guitarist and his Randall 4x12 in my room at room level volume. It's a bit tough getting the sound i want especially when there is so much low end (i typically use dropped tunings &...
  94. sk8te4free7

    New Heavy Stuff! HEAVYYYYY!! (Mayones Regius 7)

    Sounds good as usual dude!! Question, besides using the slate plugin how do you use SD when it comes to routing each drum to a bus? idk what i'm talking about here lol
  95. sk8te4free7

    bypass physical pedal?

    Another problem.. i'm using power amp+ FR212 cab... when i use the power amp i only hear the dry signal on it... When i switch the cable from power amp to axe (out2 right to out1 right) the volumes are different.. Other than sound, am i only able to have one master output volume for...
  96. sk8te4free7

    bypass physical pedal?

    One thing i hear more this time around is some high frequency hiss under the palm muted chug i randomly do.. is this the pedal itself do you think? How do i reduce the small hiss sound i hear when having the pedal on with the FXL black enabled to hear it in my rhythm preset? Volume is loud...
  97. sk8te4free7

    bypass physical pedal?

    alright so i did exactly what you said and i'm not hearing the pedal still. not sure what i'm missing lol man this is easy but still complicated..... Update: actually i do hear a diffeence, but the settings are definitely different this time around. Since the new update was released i should...
  98. sk8te4free7

    bypass physical pedal?

    I'm not understanding this for some reason. Does it matter if i put the Out 2 to the pedal input then the pedal output to the In 2 of the Axe. Which cable goes left or right?! i currently put Out 2 to pedal input then pedal output to Input 2.. i hear my sound, the pedal is on, no FX loop is in...
  99. sk8te4free7

    bypass physical pedal?

    OH!! alright so from what i understand (i NEVER used the fx send and fx return in the rear of the axe so bare with me guys) two 1/4 cables to the Input 2 [FX return] L & R only? I feel like an idiot lol my current output 2 FX Send are occupied but i believe i can remove one cable i use for my...
  100. sk8te4free7

    bypass physical pedal?

    I'm not sure how else to set up the fx loop.I put in front of the chain and i still hear the pedal lol we're talking about the real pedal right? not eh drive block IN the axe? lol
Back
Top Bottom