Search results for query: *

  1. Boogiem

    SOLVED: Tuner setup for effect trails to ring out when tuner are engaged ?

    Thanks so much AJ Vargas!!! 👍🙏😊 I missed that option, now it woks perfect..
  2. Boogiem

    SOLVED: Tuner setup for effect trails to ring out when tuner are engaged ?

    Is it possible to setup the Tuner in Axe Fx3/FM3 so that delay and reverb trails ring out when tuner are engaged? This way you can engage the tuner faster in a live setting without waiting for the effect to ring out before you engaged the tuner, because now the the effects trail mutes hard and...
  3. Boogiem

    SOLVED. Bug ? Loud Popping Noise with scene controllers

    Thank you So Much unix-guy !!!! I Increased the Attack time to 30 ms and then the popping was gone.. :):):)
  4. Boogiem

    SOLVED. Bug ? Loud Popping Noise with scene controllers

    AXE3 fw. 16.04 I get a very Loud Pooping noise when scene change direct from Scene-1 to Scene-3 with some amps when the Bass control are assign to a scene control. Scene1 to scene 2 works ok without any popping noise, but other scene change make more or less popping noise. The worst amps are the...
  5. Boogiem

    How to set up a Scene footswitch that get you back to stored scene?

    That was the problem...:) Thank You so much yoitsmegabe.
  6. Boogiem

    How to set up a Scene footswitch that get you back to stored scene?

    Lets say Scene1 are stored with all effects off, then I push one/several access footswitches to turn on effects. If I push any Scene footswitches, the effects that I have set to on via state access footswitches stays on even if I select a scene that are stored with no effects. Is it possible to...
  7. Boogiem

    Just Amp sounds Axe-Fx 3 vs AX8, are they any better?

    Leon, if it just for the amp sounds (clean/breakup Fenders to Marshall ++) are upgrade from AX8 to AX3 worth the money?
  8. Boogiem

    Just Amp sounds Axe-Fx 3 vs AX8, are they any better?

    If you compare just the amp sounds, are the axe fx 3 any better than the amp sound in the ax8? Have anyonedone a A/B test video that can show the difference on different amps, not just metal higain but also blues breakup sounds?
  9. Boogiem

    Where are a large meter to use for leveling presets?

    Thank you so much TravisG406!!! :) There it was... Very easy to use .:):):):)
  10. Boogiem

    Where are a large meter to use for leveling presets?

    The ax8 have a nice large VU meter that goes sideways on the display with a -20 dB mark that make it easy to get the same levels on presets. I cant find any large meters on AX3, just screen called "meters" with small meters for analog/USB ins/outs without any labeling. Does the Mothership has...
  11. Boogiem

    Hold on a switch to change like X/Y on AX8?

    Its it possible assign a footswitch button on the FC to: Tap = effectblock on/off, and hold to change between channels on a filter block/modulation/reverb/delay. And also have visual indication LED lit when on, color-ringing colorchange for channel indication? This is possible on the AX8 with...
  12. Boogiem

    What are the new amps in AX8 fw. 10 ?

    Takk Smittefar !!
  13. Boogiem

    What are the new amps in AX8 fw. 10 ?

    i've heard there should be 4 New amps in fw. 10, but the release note only says: "Added “Friedman 18 C45” amp model based on the HBE channel of a 2018 Friedman BE100 with the C45 switch engaged." Can some one please tell what are the New amps, so I dont have to scroll 200 + amps. :)
  14. Boogiem

    Three Amp Blocks?

    1++
  15. Boogiem

    Out of phase mod?

    If you split the signal and If you do that the result will be silence, because thats what happens if you phase rev one of the two identical signals and sum them together. In a LP with one flipped magnet(phase rev) the result is different because the pickups do not give out identical signals...
  16. Boogiem

    Implemented Non-shared modifiers per channel

    Great.... :)
  17. Boogiem

    Implemented Non-shared modifiers per channel

    +1
  18. Boogiem

    AXE3 Channel switching, audio dropout?

    Thanks for the audio clips Chad, seem that multiplexer switching between Two amp block is best way with no audio gaps. :)
  19. Boogiem

    AXE3 Channel switching, audio dropout?

    Thanks You so much iaresee thats a great feature that makes me very happy..... :)
  20. Boogiem

    AXE3 Channel switching, audio dropout?

    Hi Iqdsnddist, Here some answer for you.. I like to change amp type sound when i do solos, I often start with a clean/breakup amp and change over to more saturated amps later in the solo, mostly in the end on that last high hanging high notes. Thats why I dont like audio dropouts. Sometimes I...
  21. Boogiem

    AXE3 Channel switching, audio dropout?

    I used to have a setup with an analog amp switcher and two amps, with no audio dropouts. :) I thought the point with channels was to change between two amps ( ex, Fender clean and a dirty Marshall) with no audio dropouts and seamless switching within the same preset. Whats the point with...
  22. Boogiem

    AXE3 Channel switching, audio dropout?

    I have some questions about seamless and almost seamless channel switching an the AX3. #1:Can anyone that actually have an AX3 (not anyone who just have heard from someone.) confirm if there will be any audio droput or not when changing just the amp channels in the a preset ? #2: Will there be...
  23. Boogiem

    Effect spillover, not working right

    If you dont like spillover you a have an option to turn it off i the global menu. :) But for people like me that like smooth fades between long delay and clean amps it would be nice And you cant get that when you change presets.......
  24. Boogiem

    Effect spillover, not working right

    I have a AX8 and thinking about to buy a Axe Fx III. I see from the manual that the AX8 and the AxIII seem to have the same effects spillover functions when changing presets. The manual of the AXIII says: ”So, for example, if you change from a preset where Delay 1 has a time of 500 ms to one...
  25. Boogiem

    FRFR best choice?

    I have had and tried a lot of FRFR's Atomic CLR, ev zlx12, ev ELX12P, ev etx 10/12, and yamaha dxr 10. Then I tried L-Acoustics 108P, and it's the best FRFR I have ever heard... compared to dxr 10 it was like a blanket was removed from the speaker grill, it got much more and tighter bass, no...
  26. Boogiem

    Friedman smallbox plexi channel would be great

    I hear what you say, but for me the Friedman smallbox on the plexi channel and a open 2x10 cab with Eminence Blue alnico speakers gave me a warm breakupsound ala Peter Green with Gibson #CC1A that I havent been able to capture on the AX8.
  27. Boogiem

    Friedman smallbox plexi channel would be great

    I had a Friedman Smallbox before i changed to ax8, and for me the plexi channel was the sound rather than the BE channel on the smallbox. So a modelling of the plexi channel would be great. I love the breakup on the plexi channel.
  28. Boogiem

    Brad Paisley Wampler Ego compressor emulation

    Does somebody have a tip which comp in the AX8 to use and settings to emulate Brad Paisley´s Wampler Ego compressor settings.
  29. Boogiem

    Should I go mono or stereo to FOH

    Do you route Reverb returns to Mono, or do you use StereoReverb returns from aux sends on vocals?
  30. Boogiem

    New Midicontroller Voes MC-series

    I just downloaded the editor. Would it be better to use MC-5jr to Control on/off for up to 5 effects with #CC and use the one row of switches on the AX8 to change preset, and the other row of switches on theAX8 to switch more effects on/off or change scenes ? If the global tick Box is on (in...
  31. Boogiem

    New Midicontroller Voes MC-series

  32. Boogiem

    New Midicontroller Voes MC-series

    Is it possible to use MC-5 jr to control presets and use the function buttons switches on the right side of ax8 to switch preset banks up and down? So "bank up" will give preset 6-10 and one more push on "bank up" 11-15 etc.
  33. Boogiem

    First recording session with 7.01 Video

    Sounds great.. Would it be possible to download Your preset ?
  34. Boogiem

    Ax8 latency

    Great video!!!!
  35. Boogiem

    Ext. Switch with LED indication ?

    Thanks for the drawing. If I understand your schematic the LED is lit when the exp. Rotarypot is disconnected. I'm after a circuit with a switch that lit up the LED for "on" status. And in my head the only way to do that is to use a normally open switch in parallell with a LED. i'm on holiday...
  36. Boogiem

    Ext. Switch with LED indication ?

    Is it possible to wire a LED in parallell with an ext switch to get "on" indication/status like on the RJM mastermind gt controller? or do I have to use an ext switch with two contacts set, on for connection to ext sw jack and the other contact set with an ext psu to drive the LED?
  37. Boogiem

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    I have used fracpad a lot this weekend, and I like more than ax8 edit for fast editing. One of the reasons for that is there are no latency/ Wait for Connection when switcing preset as on the AX8 edit, and it possible to have more parameters up on the same screen withou to change pages. Its...
  38. Boogiem

    Wich. Analog King of Tone overdrive pedal

    I have had both the standard and the higain KOT and a/b them, and I know all the options. It would be great to have the od channel of the Kot pedal with the default settings of the inside presence trimpot as a pedal on the ax8.
  39. Boogiem

    Wich. Analog King of Tone overdrive pedal

    I tried the Blues OD, and it works ok with a clean or on the edge breakup amp.
  40. Boogiem

    Wich. Analog King of Tone overdrive pedal

    Would be great with a Analogman King of Tone Overdrive pedal..
  41. Boogiem

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    Edit... The size of the rotary, switches and text can be edited, my bad .... I found it when ducking deeper in the meny... :)
  42. Boogiem

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    I downloaded the full version of Fracpad, and it works great :) I have some wishes that I hope will be done in the next fw. update on Fracpad. :) The lower edit window in the Fracpad should have bigger fonts. It would be more ease to edit. The size of the pots, switches and text is too small...
  43. Boogiem

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    Thanks Jeff Engler, now my us appstore acount found the app. For me the link on the video did´t work. :) If other that live outside US have problems with downloading, I have a tip. Appstore US would not let me download it with a Us account because of my ip adress is Europe and not USA. I used...
  44. Boogiem

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    This sound very strange to me. Can you Please write down what the app is called on the us App Store so I can try and search for it since your link does not work for me. I have tried to search for Yamaha Utility, Yamaha ud, Yamaha ud-mb . I tried to downloaded other yamaha apps and that works ok...
  45. Boogiem

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    I got a US appstore account, but when I click on your link in the video for the Yamaha UD/MD Utility, the us App Store says" Item Not Available" I have also tried search in the US App Store for Yamaha, and find many Yama apps but I can't find the Utility. Please advice what to do.
  46. Boogiem

    Just updated my AX8 and now my screen is scrambling. Help!

    I had the same problem with my 3 days old AX8 with the newest fw, suddenly the display went bananas while rehersing with a band. The sound also change like switching between two presets. I hit the the edit/exit, and page switches many times, and suddenly the display was ok. Is this a bad...
  47. Boogiem

    Gig report

    This must be a top of the line FOH sound engineer since he put the PA stack behind the the vocal mics stands..... :) and put the mic on the Marshall logo in the middle where there are no speakers..
  48. Boogiem

    Wish F1/2/3 free to program to anything.

    Would be great to be able to assign all footswitches to whatever you want. Even if you dont have LED for X/Y on F1-F3, it would be nice to be able to program them to other things. I'm used from other Midicontrollers that I always have tremolo On/off where F3 is located. Not everybody need up/...
  49. Boogiem

    Implemented Display for those over 30.

    i agree... Would be nice to have a the preset name Larger on the display, much larger...
  50. Boogiem

    Is it possible to assign a controller just to Y in i block?

    I have assign a controller to the feedback parameter in the delay block, but the minimum value comes in both on X and Y setting of the block. Is it possible to assign a controller to just X or Y settings of a block? If I do not assign a controller I can have different min values for X and Y...
  51. Boogiem

    How to get Strymon el cap delay oscillation with ext switch

    I have assign all my switches on the AX8, thats why I need to use an ext switch. :)
  52. Boogiem

    How to get Strymon el cap delay oscillation with ext switch

    Now I found a solution... To change type of switch I plug into AX8, its under Setup and I/O. Also I had to change the modifier start to 100% and end 0 % to work on my switch. :)
  53. Boogiem

    How to get Strymon el cap delay oscillation with ext switch

    Thanks for the answer. I got it to work, almost. I use a momentary switch (contact when hold down/ open when not held down) I have not find where to choose between a momentary or latching switch, nor on the Editor or AX8. I want the controller to be at max when the switch is held down, and at...
  54. Boogiem

    How to get Strymon el cap delay oscillation with ext switch

    I used to have a AXFX II and had one switch on my RJM MMGT to get the Strymon el cap oscillation effect when switch hold down. Delay feedback parameter set to the egde of feedback. How can I set up an ext sw on AX8 to do the same thing ? I dont want to use the "Repat hold " switch in the delay...
  55. Boogiem

    Need advice how to setup ext. switch to bypass Trem block

    I need advice how to setup a ext. switch to control bypass the term block. Thanks..
  56. Boogiem

    AX8-Edit 1.4.0 Released

    Ax8 with Quantum 4, and ax8 edit with fw. 1.4.1
  57. Boogiem

    AX8-Edit 1.4.0 Released

    It sounds great, I just is sooo slow to do edits with the software..... :)
  58. Boogiem

    AX8-Edit 1.4.0 Released

    I just got my ax8 with quantum 4 fw. Today, but the ax8 edit 1.4.1 seems so slow, much slower than the axe edit with axfx2. I have a mac, with the lastest fw ver. Its been a while since i used axeedit on my axefx2( i have sold my axfx2) I cant remember that it used to that slow. Is this normal...
  59. Boogiem

    RAC12 - New 1U rack controller for Axe-Fx II / XL

    Thanks for Your answer Yek, and have a Nice summer as well.... :)
  60. Boogiem

    RAC12 - New 1U rack controller for Axe-Fx II / XL

    Thanks for clearing up 666was999.. Now i get it... :) I will try Your suggestion with ext cont. Thank You so much, and have a Nice summer... :)
  61. Boogiem

    RAC12 - New 1U rack controller for Axe-Fx II / XL

    Hi Yek, thanks for Your answer. :) I have a question . I thought thar the instr. in Parameter was a anlaog gain before the A/D conv. and should be adjusted so that the Input Led bar does not goes into Clip, is that right? If so then thenj the Instr in should be set lower with hot pickups than...
  62. Boogiem

    RAC12 - New 1U rack controller for Axe-Fx II / XL

    Instr in adjust how much signal coming in to the A/D converter so it will help for adjusting gain difference. Try and you will hear the difference. :) Global amp gain is not an option because it will change the tone if you the bright switch is on (higher gain setting =result is less the bright...
  63. Boogiem

    RAC12 - New 1U rack controller for Axe-Fx II / XL

    Is it possible to assign a rotary encoder on the RAC12 to control Instr in (I/O, input, Instr in) ? I want to compensate gain for weak pickups on some of my guitars without having to make new presets.
  64. Boogiem

    Smaller/lighter footprint than MFC101 plus EV-1?

    BJ Devices TB-12. small footprint Controller,12 prog. buttons, display that shows Axe name, and tuner, two exp. pedal inputs. MIDI Controllers : TB-12 MIDI Controller
  65. Boogiem

    RAC12 - New 1U rack controller for Axe-Fx II / XL

    "Ok, maybe i could wipe the Compare function and keep the fast compare ? " YES..... :)
  66. Boogiem

    RAC12 - New 1U rack controller for Axe-Fx II / XL

    I really like Fast Compare function and want you to keep it. I use the Fast Compare function alot, it is a fast way to A/B test changes without having to save as two preset and scroll between them. :) The tuner function is also a great thing, very easy to see green/red light compared to tuner on...
  67. Boogiem

    MFC lagging/tremolo effect when changing preset after 3.08 update

    I found the fault... ;) I had managed to change MIDI ch on the Axe to OMNI, and that caused the lagging.. When I changed the MIDI channel on the Axe to 1 everything was back OK. HURRA !!!! :) So if anybody get lagging when preset change, check that your Axe in the I/O tab-MIDI, MIDI channel...
  68. Boogiem

    MFC lagging/tremolo effect when changing preset after 3.08 update

    Hi Ole. I have tried to upgrade the fw two times , first time with just power on/on on the MCF after update, and the second time holding down SW11 when power recycling, and restored on the MFC display. Lagging is still a problem....
  69. Boogiem

    MFC lagging/tremolo effect when changing preset after 3.08 update

    After MFC 3.08 update, The preset change instant on the Axe display, but the sound make a lagging noise like a tremolo cutting the sound 3 times. This happens if I use Extension mode with a RJ 45 cable, or in MIDI mode with a 5 pin MIDI cable and ext PSU for the MFC-101. I connect the MFC to...
  70. Boogiem

    Blues solo with Plewi 50W and FAS cabs 60 + 61 (fw18)

    Sounds Great, and tasteful playing as always..... Preset Please? :)
  71. Boogiem

    Since I've Been Loving You FW18

    Sounds great.... Which cab did you use for the recording?
  72. Boogiem

    Soldano SLO 100 with fw 18b

    sounds great, Nice to hear some old School blusy higain sound ala Gary Moore... love it..... :)
  73. Boogiem

    Adding Cab "air" for some ZZ Top Sizzle

    The clip "and the real ZZ top" is from the terrible 1987 "six pack" Remix of the 6 first ZZ albums, and do not sound as the original recordings. All six albums were remixed and killed with digital reverb.... The original "Track Just got paid" have bone dry guitar and drums, and sounds to me a...
  74. Boogiem

    :) Possible to get less sag Deluxe Tweed FW.18 ?

    Thanks for all input folks.... The "problem" for the sag with high master setting was too high setting for the Crunch parameter, I used axe edit and Crunch is not there, I had to use the front panel on the axe.... Now the Deluxe Tweed sound great...... This forum is great, always somebody who...
  75. Boogiem

    :) Possible to get less sag Deluxe Tweed FW.18 ?

    I have my two beloved AXE Fx II (one with FW 17.04 and one with FW 18.7 beta) plugged into each input on a CLR active wedge for A/B test, and the guitar via a A/B box into each AXE input. That way I can compare FW 17.04 and 18.7 beta in real time.... :) In my head Fw 18 is so much better...
  76. Boogiem

    RAC12 - New 1U rack controller for Axe-Fx II / XL

    I got my RAC 12 today, works great..... :) fantastic product, edits in a live situation is now easy.... Is it poosible to set it up with just one quick click to STORE like the function on the bright switch/fat switch ? That would be great in a live situation when a long hold on the Store...
  77. Boogiem

    Deluxe Tweed is rather great amp

    Great tone and playing..... Which cab did you use? I love this amp, and use it with low gain setting for blues, and high gainsetting and pre boost for old zz tone. I use fab. Cab #92 proverb for high gainsetting, and #98 I think 3x10 for more open bluestone.
  78. Boogiem

    Peter Green/Fleetwood Mac

    Thanks for the kind words Black Bitch, The preset I posted 5minutes ago had the amp bypassed... sorry here is the link to the right preset http://axechange.fractalaudio.com/detail.php?preset=3017
  79. Boogiem

    Peter Green/Fleetwood Mac

    Hi Chucma, Thanks for the kind words. The reason I changed the pickups on my CC#1A was because I wanted a more vintage sound, and in my ears the Gibson BB3 pickups have to much honky mid and output. I have tried Bare Knuckle PG Blues and Manalishi pu´s and they sound great, but the Vingtor...
  80. Boogiem

    Peter Green/Fleetwood Mac

    Here is a live recording from last weekend gig at a blues club in Norway, just to show AXE fx also can do sad blues.... ;) Right ch. Lead guitar, Axe FX II fw 17.03 Tweed Deluxe amp, Cab factory #98 3x10 vibrato verb, reverb, Large Cathedral Mono mix. Left ch rhythm guitar Fender 63 Vibroverb...
  81. Boogiem

    How to setup four IA switches to act like a 4 ch analog channel- switcher.

    I´m after a ”analog GUI” like having a 4 ch amp and effectspedals patched in the effect loop, If the amp channel switches all the effects stays the same. I use IA´s to switch each effect on/off. I have AXII/MFC-101 a preset with two amps in parallell patched to a mixer and a cab, reverb...
  82. Boogiem

    Advice how to How to Switch X/Y on both delay-1 and rev-1 with one IA switch....

    Thanks both of you... :) I changed the #CC in the I/O and it works great.. I love this forum, always someone who has a solution.... Hurra hurra for the Fractal Forum !!! :)
  83. Boogiem

    Advice how to How to Switch X/Y on both delay-1 and rev-1 with one IA switch....

    Today I use one IA switch on my Mfc-101 for X/Y switching delay-1(long/short delay), and another IA switch for X/Y switching Reverb-1 ( l ong/short rev), and it works fine. Is it possible to use only one IA switch on the mfc to switch X/Y state on both delay-1 and reverb-1? If so I got one...
  84. Boogiem

    Possible to save an amp without X or Y settings?

    Thanks again Yek, as always you know the answer.... I tried it out, works great. Thanks :)
  85. Boogiem

    Possible to save an amp without X or Y settings?

    Hi Yek. i do not have the Axe Edit in front me now. Can you tell where to find/use the Clipboard option... :)
  86. Boogiem

    Possible to save an amp without X or Y settings?

    Hi, I know this, but this is not the problem see post #4. :)
  87. Boogiem

    Possible to save an amp without X or Y settings?

    Hi Yek, I know that you can rightclick and copy or swap X and Y settings in Axe edit, but if you recall a saved amp it overwrite the settings you have in both X/Y location. If I have a amp in location X that I like, but I just want to change to another amp with my own saved settings in location...
  88. Boogiem

    Possible to save an amp without X or Y settings?

    If you make a preset with a lot of scenes with two amps both with X/Y switching to get 4 amps, and want to change just X or Y in one of the amps the fun begins…. If you recall a saved amp the saved amp overwrites both X and y settings. Any solutions? Is it possible to save an amp block...
  89. Boogiem

    Yek's preset collection (Q9.04, Axe-Fx II XL)

    Yek could you post a video to show how the tuner works ? Please :D is it as good as on the front panel of the axe? or does it "lag" like on the MFC-101 ?
  90. Boogiem

    My new MFC-102....

    Brand YIS model ZL 01 2 46489.9
  91. Boogiem

    Presets, XY Switching, and Scenes in the Axe-Fx II - In-Depth 1 hour Premium Tutorial

    Great video Chris.... How can talk one hour without breathing? ;)
  92. Boogiem

    My new MFC-102....

    Hi YEk,I used standard 10k lin rotary pots that I have in my workshop. By the way your idea for the Dely-Hold function With a IA switch that Control feedback on the delayblock work great. Thanks... :)
  93. Boogiem

    My new MFC-102....

    Hi Chris, I will not take any custom orders.... I want to use my spare time to play guitar through the wonderful Axe, and not bulid things. Thats why whe have FAS. ;)
  94. Boogiem

    My new MFC-102....

    Thanks you all... The front and back panel is made of 2,5mm aluminum, the side are made of plywood. The front panel have small plywood suspension under from top to button so the panel do not bend. Labeling are made with Brother P-Touch 9600.
  95. Boogiem

    My new MFC-102....

    The switches can be found at: NKK Switches and the model: SB4011NC The original switches in the MFC-101 are quite a job to get of the PCB, so be careful not to break the PCB. The replacement switches are not quite replacement, and they do not fit direct to the MFC PCB. The original switch have...
  96. Boogiem

    My new MFC-102....

    Here´s some pictures of my pedalboard with the new MFC-102.. or actally it´s a MFC-101 with a new chassis and upgrades.. I like the MCF-101, but the switches are hard to push and click, also the rows of switches are too close to each other, and the hight between each row is not enough for my...
  97. Boogiem

    Axe-Fx Norge

    Hei Kolstrom. Jeg kjøpte to Atomic CLR active monitorer og tenkte å bruke de som to monitorer i et stero oppsett,men endte opp med å bare bruke en. Grunnen til det er at CLR'ene har 90 graders spredning og hvis de ligger nærme hverandre på en liten scene så "faser" de hverandre ut hvis en står...
  98. Boogiem

    How to setup AxeII/MFC-101 IA switch to raise delay feedback ?

    Thank you so much YEK, you are the Man.. You always have an answer.. :) Thia is the way to get same feedback delay effect as on Strymon El Capistan... sounds Great!!!
  99. Boogiem

    How to setup AxeII/MFC-101 IA switch to raise delay feedback ?

    Hello.. can any Axe gurus Please help me.... Is it possible to assign a IA switch to change/control delay feedback from 20% - 84% ? I have used X/Y in the delay block for long/short delay times so that option is gone, and all 4 exp.pedals are used to control other parameters..... se post #1.
  100. Boogiem

    How to setup AxeII/MFC-101 IA switch to raise delay feedback ?

    I use a delay block with IA switch x/y for slap delay/long delay, and it works ok, but I also want an other IA switch to raise the feedback from 20% to 84% to get the almost oscillating effect like on the Strymon El Capistan. I do not want to use the hold function on the delay block, because it...
Back
Top Bottom