Search results for query: *

  • Users: eda123
  • Content: Threads
  • Order by date
  1. eda123

    4cm clipping output

    Hopefully an easy and/or silly question. I’m using the stock 4cm method outlined in the manual. 8 have a melon model set to boost into the front of my amp, but I’m getting a clipping red LED for output 3 which feeds the front of the amp. If I turn down the boost, it’s not slamming the front of...
  2. eda123

    FS AxeFXIII Mk II + FC12

    FC12 and AxeFXIII Mk II for sale, no issues with either one. 9/10 condition. axefx sold Fc 12 $550 net to me $2500 takes them both. Located in Austin TX.
  3. eda123

    AFIII Robben Ford - Revelation

    My humble attempt…
  4. eda123

    WTB Atomic clr

    Hit me up if ya have one to move….
  5. eda123

    old FW

    Hey folks, sorry if this is listed somewhere and im just not seeing it-- where can i get the latest pre-cygnus firmware version?
  6. eda123

    Returning user with decision paralysis

    Hey all, long time user of the original axefx, the II, and the III for over ten years. I switched from amps to the axe+MFC back in 2011 and gigged with it quite a bit. Record at home as well. Well last year I went back to amps and while they sound great, I’m back to what I was doing...
  7. eda123

    MIDI PC sends not working anymore

    I have my AxeFX controlling outboard gear via MIDI program changes for each scene. This was working great a few days ago, now its not working. Im sending the correct codes using the MIDI block in my presets. I went out and bought a brand new cable and that's not working either. I also tested...
  8. eda123

    FT My FC-6 + cash for your FC-12

    Hit me up if you want to trade my fc6 plus some cash for your fc12....
  9. eda123

    Using Axe-Fx to send MIDI CC

    I have a piece of outboard gear with a 7pin midi connection. I want to use the axefx to send midi control signals to it, but the MIDI out is only a 5 pin jack. If i use a 7-pin to 5-pin cable (rocktron) would that work?
  10. eda123

    Amp channel switching

    When in 4CM, can the axefx change my amps channel using the footswitch amp input?
  11. eda123

    Instrument level FX loop in amp

    Hey all, I want to use the AxeFXiii in my amps loop via 4CM. My FX loop is instrument level. Axe is line level for input/output 3/4. Will this work ok? The noise level on the A/D input might be high, if its expecting a line level signal but getting instrument level instead. Output level...
  12. eda123

    V10 and headphones

    One thing ive noticed so far... Played thru my QSC friday and yesterday. Was immediately pumped at how improved the sound was. Then last night, played the same patches thru headphones... sounded AWFUL. Harsh, searing mids, fizzy, and a weird ghost note thing going on. Not audible at all...
  13. eda123

    mfc and patch dont play together well...

    hi all, I have one wierd patch where the MFC wont control any of the bypass states via the IA switches. They are all lit up and reflect the state of the bypass of each, but the switches do nothing. Changing bypass state on the grid via the front panel works fine... any ideas what could be...
  14. eda123

    Question on re-use of old presets while restoring factory banks

    All, Since im used to using AxeManage backups, i need some help here. New FW updates i usually : backup my AXE banks Restore all factory presets provided with the FW update Overwrite those refreshed banks with 5-10 of my personal presets that i use gigging How can I do this without...
  15. eda123

    New cabs

    Hi, For the new MIX cabs, is there any documentation on these? Im wondering what the Hawaii MIX cab is ...
  16. eda123

    Bank up/down not working with 2.15

    Hi, Since upgrading to 2.15, my bank up/down arent working. When I select Bank up, the screen reads "Bank 001: 000-004". When I select bank down, it reads "Bank 000:-05--01". Any suggestions on what i may have done wrong?
  17. eda123

    Using rear inputs vs front

    Hi, If moving to a rack based wireless system, is there any disadvantage to using the rear inputs fs the front jack?
  18. eda123

    Where did stomplabel.de go?

    When I try to go there.. it takes me to the google homepage?
  19. eda123

    auto-engage not disengaging

    hi all, ive got an EP with autoengage setup with medium as the response, and it engages fine- just never disengages. is there something i need to do to ensure the EP disengages?
  20. eda123

    pedalboards for your mfc + expression pedals

    Hi all, What options are out there for a road case / pedalboard which can fit the mfc and 2 expression pedals (and perhaps 1-2 other pedals)? I dislike pedaltrain boards- looking for something more like a road case vs. a board i yank out of a gig bag if possible... Thanks!
  21. eda123

    I now see the light with 7.0

    Just an observation. I had loaded FW7.0, and had not been blown away-- not BAD by any stretch, but sounded fairly similiar to my 6.X patches. And yep, I changed amp models back/forth to initialize the new 7.0 parameters. Most of my patches are very close to the stock presets as far as the amp...
  22. eda123

    Dont see axefx as valid "desination" in Snoize sysex librarian during update

    Hi all, Ive updated FW for MFC previously with no issues. however now, something is not working right. When I bring up Sysex Librarian on my Mac, I only see "Act as a source for other programs" as an option for "Destination"... Ive checked the cabling, set USB mode to ON in the AxeFX IO...
  23. eda123

    Another floyd recording...

    Seeing all the floyd presets shared recently got me inspired to do yet another recording of Comfortably Numb. Such a fun solo to play.
  24. eda123

    Ep1 expression pedal "starting value"

    Hi all, I set up an EP-1 as a volume pedal using a vol block. Effect is always on, just using it as a simple volume control. When I first switch to a preset, with the EP-1 full toe, there is no sound. If I just move the pedal even slightly, then sound comes through and the pedal works as...
  25. eda123

    Foo Fighters / Dave Grohl

    Hey all, Anyone have a Mesa tone ala foo fighters?
  26. eda123

    Mission SP1-- need to step three times to engage switch

    All, I set up a wah where the switch on my SP1 controls the bypass. When I load up my patch, i hear my normal patch without wah. I step on the toe switch, nothing. Step again, nothing. Step a third time.. bam... we have Wah! What am i missing in order to get the wah engaged on the first...
  27. eda123

    incorrect power down/up sequence with powered monitor

    Hey guys, A few times recently ive shut my Axe off before shutting off my QSC K10. so, i get the big "POP" coming through the speaker. I know this isnt good. What kind of damage would this cause, and how would i notice it?
  28. eda123

    preset corrupted with latest AxeEdit?

    All, After migrating to the latest axeedit, some presets of mine are completely muted. No sound... but the input lights do move on the front of the axe. Attached is one such preset- can anyone tell me what is wrong with this?
  29. eda123

    fizz/brittle sounds w/ 5.0?

    All, The dynamics knob is amazing. I set it at about 50% and the feel is incredible-- the bounce, tube like feel is great. But I also hear a distinctly brighter, fizzier, almost harshness to all my patches (after initializing them to 5.0 of course). Anyone hear the same? Any ideas on...
  30. eda123

    Is anyone else as blown away by 4.0 as I am?

    I think this is the best FW update yet, I'm surprised there aren't more folks posting about it.
  31. eda123

    ZZ top, "Sure Got Cold After the Rain Fell"

    Hey guys, This song (the remastered version after "six pack") has a really cool chorusy/vibey type of effect on the lead guitar during the intro and solo portions. I dont know quite what effect he is using... any inputs or thoughts on how to get this type of modulation?
  32. eda123

    TRS cables for exp pedals

    Hi all, Where can i find some ~3ft TRS cables on the cheap for an exp pedal? The mission ones are $25 for 3 ft which just seems really expensive-- or is it? Thx
  33. eda123

    Trower-y vibe?

    Anyone have a nice, chewy thick vibe sound ala Trower? The stock vibe setting is great but just lacks the "grind" i found with my analog vibe pedals.
  34. eda123

    Quick dial of amp/cab pairings

    I realize with the axe that there is a bit of "drinking from a firehose"... So many choices and combos its easy to miss a GREAT sound because of lack of tweaking and just scrolling on the the next model/preset. For example bringing up a brit800 and saying "meh, that's not quite right" and...
  35. eda123

    Reset system parameters

    Is this needed when upgrading firmware? I saw it on Tgp but this is one step I never usually do.
  36. eda123

    QSC K10, Atomic Reactors, and volume....

    Hey all, Ive got a QSC K10 and its a great speaker. I recently started playing in a band again and when we were all up at volume i had the K10 *dimed* and it was loud enough-- but it was completely maxed. I like having more volume on tap. I was thinking about getting a second for...
  37. eda123

    Power cord

    The axe II ships with a power cord rated at 240v/10A. Can I use one rated for 125v/10A? I'm guessing this is no biggie in the US...
  38. eda123

    FW3.0 - preset banks B & C

    Hi All, Anyone know if there are plans to update banks B & C to match the latest FW? The 3.0 release notes say only A was redone to reflect the changes and improvements. I wouldnt even know what to do to update B/C to make them "3.0 ready". :(
  39. eda123

    how to contact fractal re: shipping?

    Hi guys, I was supposed to get my new AxeII today, but saw on UPS web site that i forgot to enter my works Suite# for the building i work in. Fractal has to tell UPS the correct address, and I dont know how to get a hold of them. I sent an email to sales@fractalaudio.com but I dont know how...
  40. eda123

    Modifying GEQ for the II as we did in the Std?

    Hi all, I have a II on its way. Im curious-- with the Std I modified the global EQ by notchign down the lowest band in the global EQ (80Hz?) so that the sound thru my QSCK10 blended in better with the band. Back when I initially got my Axe it seemed quite a few were doing the same. I cant...
  41. eda123

    Gator shallow case-- deep enough?

    I see this case: http://www.gatorcases.com/Default.aspx? ... ogID=10017 The depth is listed at 12.5". The Axe itself has dimensions listed at 12", but this is all the way to the front of the handles. I want to have my AxeFX and Furman, with enough room in back for cables, and for plugging in...
  42. eda123

    Fast track pro headphone volume

    I have a fast track pro and the headphone volume just seems weak. I usually have it maxed, and it's just barely loud enough- noticeably weaker than my Mac pro headphone output. Others see the same? If so, are you amplifying it after the fasttrack or is there some trick to getting it louder...
  43. eda123

    Low down on redwirez....

    Hey all, Ive had my Axe for a week - im really loving the little black box and there is lots of room to explore and keep me busy for years :) But some good tones without much fiddling. Heck, I even love a ton of the presets on there... So, many of you love the Redwirez IR's. Some have even...
  44. eda123

    First impressions...

    Hey all, So psyched. Ive been a big proponent of modelling, owned/played Line6 gear for 10 years at home (for late night headphone practice) and at church (direct to board). Ive been a tube amp user with bands Ive been in outside of church.. same story, been through dozens of amps and pedals...
  45. eda123

    Rig complexity with STD

    Hey everyone, Im also about to buy- im leaning towards the Std, simply because I use very basic setups. I will mainly use the Axe for the amp sims- maybe 2 amps in parallel occasionally- maybe a chorus / vibe, delay, EQ, and occasionally a comp or drive. Definitely dont need any of the extra FX...
  46. eda123

    Atomic Reactor Q

    Hey folks, Just soaking all this info in the last few days. I notice on the Wiki: Since the Reactor's have tube amps in them, does this mean I would benefit from disabling the power amp sim in the Axe-FX?
  47. eda123

    Intrigued- questions on AxeFX use with Atomic amps

    Hey all, Ive played tube amps my whole playing career (25 yrs). Ive used Line6 gear for 10+ yrs at home for late night practice, and for going direct at church. I use my amp and large pedalboard for my gigging band. I recently upgraded to the pod hd. well, over on TGP there is a lot of...
Back
Top Bottom