Just use a drive pedal. FET Preamp sounds good.I know it's wrong, but I'd love to have an actual Pignose model.
You know, 2-3 days after you erase them, you'll need them again. That's the way it works with stored items....
Ol' Murphy is a prick sometimes....
Close your eyes and twist the knob and leave it where it sounds best ... puts a fat smile on my face every time. I spent years petrified to change things, now I'm like a kid in a knob factorySo things that sound and feel good to the user?
There's no hard and fast rule about how to find the perfect setting because it's subjective. EVERYONE sets their amps and guitars differently, uses different strings and picks, strums and plays differently, so how is picking the perfect sound from a modeler different?
I have about 20 presets I like. Some are cannibalized from other presets, but I tweaked them to make them my own because I didn't like how the original sounded. I don't want to sound like someone else; I might want a hint of someone else, but it's me hiding behind the guitar. So I rely on my ears to guide me.
Same here. Every once in a while I will find a new favorite for my high gain. Clean and dirt have tended to stay the same though.Cliff, in the past nine years you've caused my ears to maybe change my main amp five or six times. I can't remember the exact order but I believe it was the Herbert and the Engl, then on to the 5153 red and next Triaxis and lastly the 5153 50w blue. Now this JP shred is most likely going to be the King! Thanks a lot Mr Tone Chaser Chase!
I'm like a kid in a knob factory
Murphy was optimist.You know, 2-3 days after you erase them, you'll need them again. That's the way it works with stored items....
Ol' Murphy is a prick sometimes....
Yup.Murphy was optimist.
I'm like an adult in a knob factoryUmmm......
I don’t don’t how you can miss low end with a 4x12 and the 3... sure your poweramp is ok ?Everything sound great, but i miss much lowend when i play via mesa 20/20 and engl 4x12 guitar cab....
Via Headphone it`s ok...I also rolled back to 15.1 and there is a huge difference in lowend...
are you all playing via monitor and not like an "normal" rig like me?
Amps with EL84s are often voiced a little light in the low end, and it's really about 17W per channel, max....I don’t don’t how you can miss low end with a 4x12 and the 3... sure your poweramp is ok ?
Change amp in the axe , don’t know ... that not possible . You have millions of eq in the axe to boost bass . If you have 2 horizon drive and the cut button “on” or bass cut somewhere ... maybe
Post a video even if it’s hard to take this with a phone , just to have an idea
Is this the reason tube amps sound best after 20 minutes of rockin? :OYes.
You may have better luck starting a new thread on your issues?Here are my Patches to compare.The ir i use doesent matter because it`s only via real Cab
One is 15.1 and the next i think beta 5.
I tryed my mesa and my matrix with the same result.
Always set speaker in global settings to bypass
You can roll back to 15.1 and load the preset for it and the flash mabe beta 11
oder whatever. Normaly you will notice a huge lowend drop with Cygnus.
You can dail back the lowend but it´s not the same.
Mabe i did something wrong...I need some help if i did...
But i came from Axe 2 and know a little bit how to dail in tones..
forgot to say that i don`t want to do millions of eq`s
and also tryed any reset trick and make an hole new preset from scretch
I use an OS7 with fishman abasi-set.
I hope someone will make the way and go back to 15.1 and can help me with my problem...
Thank you
The abasi set is not in single coil mode ? I know these questions are stupid, I am not saying you are a noob asking this , but with a 7 strings and an axe + 4x12 is not possible . I will try in the end of the week your presets but in the return of my head and cab (don’t have any poweramp)I have already done the test in the return of the head and nothing was missing . Have you tried with another guitar? and not the 5153? They are many other amps for heavy tones . Even the fas modern is bigHere are my Patches to compare.The ir i use doesent matter because it`s only via real Cab
One is 15.1 and the next i think beta 5.
I tryed my mesa and my matrix with the same result.
Always set speaker in global settings to bypass
You can roll back to 15.1 and load the preset for it and the flash mabe beta 11
oder whatever. Normaly you will notice a huge lowend drop with Cygnus.
You can dail back the lowend but it´s not the same.
Mabe i did something wrong...I need some help if i did...
But i came from Axe 2 and know a little bit how to dail in tones..
forgot to say that i don`t want to do millions of eq`s
and also tryed any reset trick and make an hole new preset from scretch
I use an OS7 with fishman abasi-set.
I hope someone will make the way and go back to 15.1 and can help me with my problem...
Thank you
On the boot screen if you look carefully you'll see some Cygnus mischief...THANK YOU CLIFF AND STAFF! Will we get the CYGNUS screen on Final Release?? Loved it! Best