GotMetalBoy
Power User
I made some templates so the FAMC Liquid Foot+ LF+ can be quickly setup to use with an Axe-Fx III
The easiest way to setup the LF+ for an Axe-Fx III, is to use my template and assign whatever buttons are needed on the Pages and if they need to use IA's above 60, to use IA-Maps to re-arrange the IA's. If Presets above 384 are needed, the PC#'s can be changed in presets. If presets need to be selected non-sequentially, put the LF+ into Song mode and arrange the presets in any order needed into a song. If you want to be able to sequentially scroll through all 512 Axe-Fx III presets, use the IA's named PC# INC and PC# DEC, which I've included on Page 2 named Page Utility(Pg Util).
Here's the link to my Dropbox with the files:
# https://www.dropbox.com/sh/heghqmz9onvv948/AAA6ysP7v4wnGWxAzHwAC9joa/LF+ Editor Sysex Files/!Axe-Fx III?dl=0
## The main template to get you up and running quickly is: "Axe-Fx III Template Presets (Names v12p09) Songs Set-Lists Pages IA-Slots IA-Maps Global"
I also have a folder named "Individual Files" that has all the IA-Slots programmed for the Axe-Fx III:
# https://www.dropbox.com/sh/heghqmz9onvv948/AAA87AAtsbIubjxHk6hcpqOCa/LF+ Editor Sysex Files/!Axe-Fx III/Individual Files?dl=0
I used LF+ firmware v6.32 and LF+ Editor v6.31. So far I have not run into any bugs with the firmware and only a couple minor bugs with the Editor that I found workarounds for.
The main template has every Axe-Fx III Block 1 IA-Slot but if you need Blocks 2-4, you can load them from the individual files. I made sure to put the IA-Slots in the individual files starting after the default slots 1-60, so you can load them into the Editor and drag them to the slots you want or you can create your own IA-Maps.
All the Channel IA-Slots are programmed to display a menu, so you can select Channel A-D and when you select a Channel, it will also enable the associated block if it's disabled.
== Example ==
# Delay 1 IA-Slot is disabled
# Step on the Delay 1 Channel IA-Slot
# Step on any channel A-D
# Now the channel is selected and the Delay 1 IA-Slot is enabled too
== Tip for assigning Block and Channel IA-Slots ==
# In the LF+ Editor, go to the Global tab
# Under Hardware:
## Enabled "Force 2nd func ASAP" (Make button Green)
## Under "Combo Button Press Blocking", enable SAVE/COPY (Make button Green)
# Go to the Page tab
# Select a Page you want to edit
# Select a button you want to edit
# Assign Function 1 to a Block IA-Slot like the Delay 1 Block
# Assign Function 2 to the associated channel Delay 1 Channel
# Change the button's "Button Pressed Trigger Type" from "Toggle & Trigger" to "Trigger Only"
# Now you can change the Delay 1 Block's bypass state from ON/Bypass and if you hold the button down the Channel menu will open, so you can select channel A-D
All the Scene IA-Slots toggle
== Example ==
# S1 toggles to S2
## Step on S1, S1 will be selected
## Step on S1 again, it will toggle back and forth between S1 and S2
# S2-S4 toggles to S1
## Step on S2, S2 will be selected
## Step on S2 again, it will toggle back and forth between S2 and S1
## Step on S3, S3 will be selected
## Step on S3 again, it will toggle back and forth between S3 and S1
## Step on S4, S4 will be selected
## Step on S4 again, it will toggle back and forth between S4 and S1
# S5 toggles to S6
## Step on S5, S5 will be selected
## Step on S5 again, it will toggle back and forth between S6 and S5
# S6-S8 toggles to S5
## Step on S6, S6 will be selected
## Step on S6 again, it will toggle back and forth between S6 and S5
## Step on S7, S7 will be selected
## Step on S7 again, it will toggle back and forth between S7 and S5
## Step on S8, S8 will be selected
## Step on S8 again, it will toggle back and forth between S8 and S5
Let me know if you have any questions or find anything I need to fix. Enjoy!!!
Disclaimer:
I am not or ever been an employee, affiliate or have any connection with FAMC
I'm a FAMC customer that owns a LF+ PRO+, LF+ 12+, BE-2 and Phantom Power box
The easiest way to setup the LF+ for an Axe-Fx III, is to use my template and assign whatever buttons are needed on the Pages and if they need to use IA's above 60, to use IA-Maps to re-arrange the IA's. If Presets above 384 are needed, the PC#'s can be changed in presets. If presets need to be selected non-sequentially, put the LF+ into Song mode and arrange the presets in any order needed into a song. If you want to be able to sequentially scroll through all 512 Axe-Fx III presets, use the IA's named PC# INC and PC# DEC, which I've included on Page 2 named Page Utility(Pg Util).
Here's the link to my Dropbox with the files:
# https://www.dropbox.com/sh/heghqmz9onvv948/AAA6ysP7v4wnGWxAzHwAC9joa/LF+ Editor Sysex Files/!Axe-Fx III?dl=0
## The main template to get you up and running quickly is: "Axe-Fx III Template Presets (Names v12p09) Songs Set-Lists Pages IA-Slots IA-Maps Global"
I also have a folder named "Individual Files" that has all the IA-Slots programmed for the Axe-Fx III:
# https://www.dropbox.com/sh/heghqmz9onvv948/AAA87AAtsbIubjxHk6hcpqOCa/LF+ Editor Sysex Files/!Axe-Fx III/Individual Files?dl=0
I used LF+ firmware v6.32 and LF+ Editor v6.31. So far I have not run into any bugs with the firmware and only a couple minor bugs with the Editor that I found workarounds for.
The main template has every Axe-Fx III Block 1 IA-Slot but if you need Blocks 2-4, you can load them from the individual files. I made sure to put the IA-Slots in the individual files starting after the default slots 1-60, so you can load them into the Editor and drag them to the slots you want or you can create your own IA-Maps.
All the Channel IA-Slots are programmed to display a menu, so you can select Channel A-D and when you select a Channel, it will also enable the associated block if it's disabled.
== Example ==
# Delay 1 IA-Slot is disabled
# Step on the Delay 1 Channel IA-Slot
# Step on any channel A-D
# Now the channel is selected and the Delay 1 IA-Slot is enabled too
== Tip for assigning Block and Channel IA-Slots ==
# In the LF+ Editor, go to the Global tab
# Under Hardware:
## Enabled "Force 2nd func ASAP" (Make button Green)
## Under "Combo Button Press Blocking", enable SAVE/COPY (Make button Green)
# Go to the Page tab
# Select a Page you want to edit
# Select a button you want to edit
# Assign Function 1 to a Block IA-Slot like the Delay 1 Block
# Assign Function 2 to the associated channel Delay 1 Channel
# Change the button's "Button Pressed Trigger Type" from "Toggle & Trigger" to "Trigger Only"
# Now you can change the Delay 1 Block's bypass state from ON/Bypass and if you hold the button down the Channel menu will open, so you can select channel A-D
All the Scene IA-Slots toggle
== Example ==
# S1 toggles to S2
## Step on S1, S1 will be selected
## Step on S1 again, it will toggle back and forth between S1 and S2
# S2-S4 toggles to S1
## Step on S2, S2 will be selected
## Step on S2 again, it will toggle back and forth between S2 and S1
## Step on S3, S3 will be selected
## Step on S3 again, it will toggle back and forth between S3 and S1
## Step on S4, S4 will be selected
## Step on S4 again, it will toggle back and forth between S4 and S1
# S5 toggles to S6
## Step on S5, S5 will be selected
## Step on S5 again, it will toggle back and forth between S6 and S5
# S6-S8 toggles to S5
## Step on S6, S6 will be selected
## Step on S6 again, it will toggle back and forth between S6 and S5
## Step on S7, S7 will be selected
## Step on S7 again, it will toggle back and forth between S7 and S5
## Step on S8, S8 will be selected
## Step on S8 again, it will toggle back and forth between S8 and S5
Let me know if you have any questions or find anything I need to fix. Enjoy!!!
Disclaimer:
I am not or ever been an employee, affiliate or have any connection with FAMC
I'm a FAMC customer that owns a LF+ PRO+, LF+ 12+, BE-2 and Phantom Power box
Last edited: