Guitarjon
Fractal Fanatic
About a week ago I re-amped a couple of tracks for my band with my main Recto 1 red modern preset that uses an Ownhammer IR.
Since there was a fix in the cab block with fw18.07 I thought I'd re-amp everything again to see if there was a difference.
With some sounds the difference was very small but when I started to re-amp tracks with my main rhythm patch I noticed that there was quite a dramatic difference between the tones even though it was the same patch.
The main difference was that the 'new' tone with FW18.07 had a kind of scooped sound, a big dip somewhere in the 400/500k area mainly, a kind of hollow sound.
This was strange so I did a system reset.... didn't help.
Selecting another amp didn't seem to help so I decided to rebuild the patch from scratch with approximately the same settings (some controls were maybe .01 to .10 off but very minor differences) and voila, the old sound with the old mids was back.
So I saved the new version over the old patch.
Then it became even stranger.
When I loaded the new tweaked patch it had the same issues as the older one before I re-did it, so also the scooped mids.
Once again rebuilding the patch helped.
I use axe edit for all these tones.
Axe Edit did a refresh after I loaded fw18.07.
My patch uses the Recto 1 red modern with no fancy tweakage going on.
The IR that I used is OH 412 ENG V30-MB-08 RMDR 03.
I'm not sure if this has to do with the cab block or amp.
I uploaded the patch here but it may be hard to recreate the issue because of all the different variables because not every preset had the same issues.
Just thought I'd drop a note here anyways.
Since there was a fix in the cab block with fw18.07 I thought I'd re-amp everything again to see if there was a difference.
With some sounds the difference was very small but when I started to re-amp tracks with my main rhythm patch I noticed that there was quite a dramatic difference between the tones even though it was the same patch.
The main difference was that the 'new' tone with FW18.07 had a kind of scooped sound, a big dip somewhere in the 400/500k area mainly, a kind of hollow sound.
This was strange so I did a system reset.... didn't help.
Selecting another amp didn't seem to help so I decided to rebuild the patch from scratch with approximately the same settings (some controls were maybe .01 to .10 off but very minor differences) and voila, the old sound with the old mids was back.
So I saved the new version over the old patch.
Then it became even stranger.
When I loaded the new tweaked patch it had the same issues as the older one before I re-did it, so also the scooped mids.
Once again rebuilding the patch helped.
I use axe edit for all these tones.
Axe Edit did a refresh after I loaded fw18.07.
My patch uses the Recto 1 red modern with no fancy tweakage going on.
The IR that I used is OH 412 ENG V30-MB-08 RMDR 03.
I'm not sure if this has to do with the cab block or amp.
I uploaded the patch here but it may be hard to recreate the issue because of all the different variables because not every preset had the same issues.
Just thought I'd drop a note here anyways.