We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results for query: *

Users: unix-guy
Order by date

FM9 Firmware Version 7.00

The Brit Silver model is a different amp from previous firmware versions...
- unix-guy
- Post #174
- 40 minutes ago
- Forum: FM9 Discussion
Wish Footswitch ring color change with channel change

It's been wished before - maybe by me and maybe for FC-12... Good wish, not currently possible. Edit: Yep, by me and by others: https://forum.fractalaudio.com/search/1812233/?q=Color%2Bchannel&c%5Btitle_only%5D=1&o=date
- unix-guy
- Post #2
- Today at 5:01 PM
- Forum: FM9 Wish List
FCB1010 how to make 1 stomp footswitch momentary

Standard behavior for midi IAs is to send 0 for OFF and 127 for ON. Most devices expect this behavior. The Fractal products do have a global Toggle setting that would allow this to work. I'm not sure what you mean by "momentary" in this case, as midi CCs aren't stateful.
- unix-guy
- Post #11
- Today at 4:59 PM
- Forum: Other MIDI Controllers
New Incredibly good sounding IR (free) from Berlin

He's talking about the logo from the company in the link compared to his own company's logo...
- unix-guy
- Post #8
- Today at 3:58 PM
- Forum: User Cabs and IR's
Best way to convert PRS trem to down only

If you loosen the term springs then the back of the trem will rest on the body. I don't think it should affect the height...
- unix-guy
- Post #6
- Today at 3:55 PM
- Forum: Guitars
Best way to convert PRS trem to down only

Why not just loosen the springs and leave it decked? Least work and requires no mods...
- unix-guy
- Post #3
- Today at 3:31 PM
- Forum: Guitars
Issues....Scene Revert not happening

I'm also assuming FC since he mentioned being at rehearsal... So I specifically didn't mention that Scene Revert doesn't apply in the editor. But maybe we should not assume. It would definitely be the explanation.
- unix-guy
- Post #7
- Today at 3:20 PM
- Forum: Axe-Fx III Discussion
FM9 unix-guy's random jams

Saturday morning exploration... this is pretty chill. Drop Top into the Deluxe Reverb boosted by the VS9 Valve Screamer... with a healthy dose of Gold Plate reverb and my normal dual delay. The chords have a little CE-2 chorus as well. I could play over this shit all day long :) Edit: This...
- unix-guy
- Post #74
- Today at 3:07 PM
- Forum: Fractal Recordings
Issues....Scene Revert not happening

I normally keep Scene Revert OFF... but, clarifying question: Does it properly revert when you change from one scene to another and then back? From your post, it sounds like you are doing this: Select a scene Change some blocks Press the switch for the same scene I'm not sure that's...
- unix-guy
- Post #2
- Today at 12:36 PM
- Forum: Axe-Fx III Discussion
Preset links on View 2 of FC-6

I was just checking the manual for any clues... One thing I'm sure you already know but wanted to mention from the manual: Distinctly different from other switch settings because they are part of the preset.
- unix-guy
- Post #12
- Today at 12:22 PM
- Forum: FM3 Discussion
"No Response Received" when updating from FW 6 to 7

Try another USB cable. Try another USB port. Try downloading the firmware again.
- unix-guy
- Post #2
- Today at 12:12 PM
- Forum: FM9 Discussion
My new FM21

Make your stand with a small "lip" in the front and build the switches into it. Kind of like what some of us do with the Temple Audio boards. It works great...
- unix-guy
- Post #16
- Today at 11:33 AM
- Forum: FM9 Discussion
My new FM21

I'm pretty sure he meant Rick's rig ;)
- unix-guy
- Post #15
- Today at 11:26 AM
- Forum: FM9 Discussion
FM3 Firmware Version 8.00 beta 1

That's a personal decision... Many people do it and don't have any issues. Use your judgement based on issues being reported or not. Many betas become releases... ;)
- unix-guy
- Post #625
- Today at 11:18 AM
- Forum: FM3 Discussion
FM3 Firmware Version 8.00 beta 1

Why would you think that?
- unix-guy
- Post #624
- Today at 11:16 AM
- Forum: FM3 Discussion
FM3, Roland FC200 and Morningstar MC6 pro delay in switching scenes

Cool, glad you got it sorted out!
- unix-guy
- Post #14
- Yesterday at 7:44 PM
- Forum: FM3 Discussion
Capt Hook 2 & 3 Gain and Level control

I almost did the same thing a couple weeks ago when trying to help my buddy dial in the SLO-100..
- unix-guy
- Post #4
- Yesterday at 7:43 PM
- Forum: Axe-Fx III Discussion
Ibanez az2402 Prestige review + mix demo

See the previous post ;)
- unix-guy
- Post #21
- Yesterday at 7:40 PM
- Forum: Guitars
RIP Mike Pinder

I played a number of gigs in the past with his sons (Matt and Mike), AKA: The Pinder Brothers. Our singer back then worked with Matt at REI and our bands fit well together. Nice guys and great musicians/singers. RIP Mr Pinder!
- unix-guy
- Post #4
- Yesterday at 7:40 PM
- Forum: The Lounge
AX8 OUT1 Level Changing Occasionally with Preset Change

The AX8 hasn't been supported in almost 6 years, they aren't going to release any updates at this point.
- unix-guy
- Post #5
- Yesterday at 7:27 PM
- Forum: AX8 Discussion
FM3, Roland FC200 and Morningstar MC6 pro delay in switching scenes

My question wasn't about CCs. I was asking if you're sending the PCs on a single midi channel or Omni? You should use only the midi channel the FM3 is set to... What happens if you turn PC Mapping OFF? Is there a specific reason you have it ON?
- unix-guy
- Post #12
- Yesterday at 7:18 PM
- Forum: FM3 Discussion
Preset links on View 2 of FC-6

Layout Links allow specifying both the Layout and the View to change to... I suspect you didn't select View 1...
- unix-guy
- Post #2
- Yesterday at 4:31 PM
- Forum: FM3 Discussion
FM3, Roland FC200 and Morningstar MC6 pro delay in switching scenes

Are you sure you're sending PC only on a single channel? The whole point of Ignore Redundant PC is to prevent reloading the same preset. Is the midi channel on the FM3 set to a specific channel? Don't use "Omni". Do you have PC Mapping set to ON? That could also cause unexpected behavior.
- unix-guy
- Post #10
- Yesterday at 4:28 PM
- Forum: FM3 Discussion
Fender Tone Master FR-12 Disappointment

What are you referring to?
- unix-guy
- Post #24
- Yesterday at 4:20 PM
- Forum: Amps and Cabs
Sending 'full signal' to FOH (Similar to Helix)

That will of course depend on whether you're sending -10 or +4dB... With +4dB it might be a bit on the hot side.
- unix-guy
- Post #31
- Yesterday at 4:18 PM
- Forum: FM9 Discussion
Running 1 guitar and 1 bass

Output 1 and Headphones are the same signal. There's no way to route the other outputs to headphones.
- unix-guy
- Post #13
- Thursday at 11:48 PM
- Forum: FM9 Discussion
Head cab for fx3

Are you talking about a shell/rack to mount the Axe Fx? When you say "cab" I think people will probably interpret that as a speaker cabinet.
- unix-guy
- Post #2
- Thursday at 10:23 PM
- Forum: Axe-Fx III Discussion
FM9 Firmware Version 7.00

RANF isn't likely to affect the sound...
- unix-guy
- Post #168
- Thursday at 10:21 PM
- Forum: FM9 Discussion
Sending 'full signal' to FOH (Similar to Helix)

That doesn't really make much sense. The output volume from the FM3 is volume only. You could have just increased the level at the mixer... Either case should just be clean amplification. Also, were you using -10 or +4dB on the Output setting?
- unix-guy
- Post #26
- Thursday at 9:04 PM
- Forum: FM9 Discussion
OMG9 - external foot switches for output volume increment / decrement?

You will need to configure your external switches as stand-in switches. Then you can assign those functions to the switch settings thru FC Edit within the editor. Stand-in switches require some setup that is only possibleon the hardware. Search the FM3 manual for "Stand-in Switch"...
- unix-guy
- Post #9
- Thursday at 9:01 PM
- Forum: FM3 Discussion
FM3, Roland FC200 and Morningstar MC6 pro delay in switching scenes

Set Ignore Redundant PC to ON. That will make it ignore the PC message if you're already on that preset.
- unix-guy
- Post #7
- Thursday at 6:43 PM
- Forum: FM3 Discussion
FSOT Music Man Luke 3 HSS Ball Family Reserve

Cool - thanks!
- unix-guy
- Post #4
- Thursday at 6:36 PM
- Forum: For Sale
Running 1 guitar and 1 bass

True, but I think with that bug you get audio from both rather than no audio...
- unix-guy
- Post #9
- Thursday at 5:51 PM
- Forum: FM9 Discussion
FM3, Roland FC200 and Morningstar MC6 pro delay in switching scenes

Why not just set Scene Revert to ON?
- unix-guy
- Post #5
- Thursday at 5:50 PM
- Forum: FM3 Discussion
FM3, Roland FC200 and Morningstar MC6 pro delay in switching scenes

How is the Roland doing scene changes? Specifically, what midi is being transmitted? Are you using CCs or PC Mapping? Is it sending on a specific channel or all channels?
- unix-guy
- Post #3
- Thursday at 4:29 PM
- Forum: FM3 Discussion
Running 1 guitar and 1 bass

What is the Bypass Mode set to on the bypassed Drive block?
- unix-guy
- Post #7
- Thursday at 4:25 PM
- Forum: FM9 Discussion
Running 1 guitar and 1 bass

That is overridden when there's an Output 2 block in the preset...
- unix-guy
- Post #6
- Thursday at 4:24 PM
- Forum: FM9 Discussion
FSOT Music Man Luke 3 HSS Ball Family Reserve

Curious what the battery is used for? Great looking guitar!
- unix-guy
- Post #2
- Thursday at 4:18 PM
- Forum: For Sale
Which cab with which amp?

Exactly - because "best" is subjective and very personal... I'm in the camp that tends towards using the same IR(s) for everything because I've found what works for me.
- unix-guy
- Post #13
- Thursday at 4:03 PM
- Forum: FM3 Discussion
V 7 Update

Firmware updates update the firmware. Presets are not part of the firmware nor are IRs. You can safely update firmware without concern that presets or IRs will be affected. The new FW7 presets for FM9 are not changed in any way from previous presets. They've merely been re-saved under FW7 so...
- unix-guy
- Post #3
- Thursday at 3:58 PM
- Forum: FM9 Discussion
Mission Engineering SP1-RB-Bk Compatibility

Probably more helpful for you to create your own thread for your question.
- unix-guy
- Post #10
- Thursday at 3:45 PM
- Forum: FM9 Discussion
Axe-Fx III Firmware 25.01 Release

His answer seems pretty clear... Check the release notes in the wiki regarding updates, but I'm not sure you're going to find the information in a way that you want.
- unix-guy
- Post #88
- Thursday at 3:42 PM
- Forum: Axe-Fx III Discussion
Graphics glitch

Never seen that before...
- unix-guy
- Post #3
- Wednesday at 3:48 PM
- Forum: Axe-Fx III Discussion
Let's see those FM3 rigs!

There are only 12 amps ;) There are 24 cabs, however...
- unix-guy
- Post #2,023
- Wednesday at 3:41 PM
- Forum: FM3 Discussion
Upgraded from FM3 to FM9 Turbo. Do I need to reset amp blocks?

Correct.
- unix-guy
- Post #4
- Wednesday at 3:30 PM
- Forum: FM9 Discussion
FM9 Firmware Version 7.00

That is in the editor menu under Tools (I think) - it's not a global setting...
- unix-guy
- Post #156
- Wednesday at 3:26 PM
- Forum: FM9 Discussion
Wish Second instance of FM Edit or split screen to compare blocks across presets

Fractal used to have an offline capable editor. There were issues with maintaining that. As I mentioned above, the current editor is a client. It reads the settings from the hardware in realtime. The "buffer" is the preset on the hardware as far as I'm aware. It's a cool wish. It would be...
- unix-guy
- Post #9
- Wednesday at 12:57 AM
- Forum: FM9 Wish List
Wish Second instance of FM Edit or split screen to compare blocks across presets

You could use FracTool to "see" the settings in another preset, but it's not going to be displayed the same way...
- unix-guy
- Post #5
- Wednesday at 12:17 AM
- Forum: FM9 Wish List
Wish "What's Changed" indicator for FM Edit

No, it's not possible to delete it and you're certainly not the first person to wish for something that's already been wished ;)
- unix-guy
- Post #4
- Wednesday at 12:14 AM
- Forum: FM9 Wish List
Wish "What's Changed" indicator for FM Edit

This has been wished many times in various forms...
- unix-guy
- Post #2
- Tuesday at 11:18 PM
- Forum: FM9 Wish List
Wish Second instance of FM Edit or split screen to compare blocks across presets

Not possible. The editor is a "client" to the hardware. It doesn't have a way to do anything with the preset without it being loaded on the hardware and only one preset can be active at a time.
- unix-guy
- Post #2
- Tuesday at 11:17 PM
- Forum: FM9 Wish List
Paint Audio midi controller

The Fractal supports sending tuner data over midi. This is documented in Fractal's Third Party Midi Specification. However, this requires the midi controller to be coded to send, receive and process the sysex for this. Unless you are talking about just turning the Tuner on the unit on and off...
- unix-guy
- Post #13
- Tuesday at 10:58 PM
- Forum: Other MIDI Controllers
receiving my FM9 tomorrow. Looking for a dirty channel JCM 2000 amp tone?

:)
- unix-guy
- Post #3
- Tuesday at 10:47 PM
- Forum: FM9 Preset Exchange
TUTORIAL: In depth MFC-101 programming guide for the Axe-Fx III

You used FractalBot to upload the .syx file? That's just sending the configuration... You'll probably want to perform a reset of the MFC. Then download and use MFC-Edit to configure it for your Axe Fx II. https://forum.fractalaudio.com/threads/where-to-download-mfc-edit.160504/
- unix-guy
- Post #64
- Tuesday at 10:44 PM
- Forum: Axe-Fx III Discussion
FM9 Firmware Version 7.00

There aren't any new cabs. There are no new effects although there's a new Drive type. There's a new AC30 Brilliant amp model. https://wiki.fractalaudio.com/wiki/index.php?title=Firmware_release_notes_-_FM9
- unix-guy
- Post #145
- Tuesday at 10:21 PM
- Forum: FM9 Discussion
Default to Per-preset layout at startup

If loading a preset causes the Layout to change then there's also a Layout Link defined on the switch. You can edit your preset switches to change to whatever layout+view you want after the preset changes.
- unix-guy
- Post #6
- Tuesday at 3:57 PM
- Forum: FM9 Discussion
Wish Boss HM-2 pedal

There are already multiple wishes for this going way back, including your previous wish for the same thing ;) Forum search before wish list posting should be required: https://forum.fractalaudio.com/search/1795000/?q=Hm-2&c%5Btitle_only%5D=1&o=date
- unix-guy
- Post #4
- Tuesday at 3:52 PM
- Forum: Axe-Fx III Wish List
Three weeks in w/ FM3 Mk II Turbo

I totally missed that :)
- unix-guy
- Post #13
- Tuesday at 3:43 PM
- Forum: FM3 Reviews
Axe-Fx III Firmware 25.01 Release

It's a new amp so it could just be the amp...
- unix-guy
- Post #55
- Tuesday at 3:41 PM
- Forum: Axe-Fx III Discussion
TUTORIAL: In depth MFC-101 programming guide for the Axe-Fx III

No idea what "program" you are referring to, so hard to say. The MFC doesn't support Axe Fx III natively.
- unix-guy
- Post #62
- Tuesday at 3:41 PM
- Forum: Axe-Fx III Discussion
FM3 Firmware Version 8.00 beta 1

Roll back to pre-DynaCab firmware (and stay there)... Otherwise see the previous post ;)
- unix-guy
- Post #572
- Tuesday at 3:24 PM
- Forum: FM3 Discussion
Three weeks in w/ FM3 Mk II Turbo

I have all 3. Got the Axe Fx III first. It's great but isn't the most optimal for gigging. Got the FM9 next. It's the sweet spot for my needs for gigs. Got the FM3 last. We have 3 members all using FM9s. My idea is that it can serve as the gig backup for any of us. Also my son is using it as...
- unix-guy
- Post #11
- Tuesday at 11:33 AM
- Forum: FM3 Reviews
Upgraded from FM3 to FM9 Turbo. Do I need to reset amp blocks?

Those Amp parameters are updated when the preset is recalled.
- unix-guy
- Post #2
- Tuesday at 12:33 AM
- Forum: FM9 Discussion
Which COMP is, or is closest to LA2A ?

I think you're correct.
- unix-guy
- Post #2
- Tuesday at 12:31 AM
- Forum: FM3 Discussion
Guitar Chord/Scale App

Maybe helpful to list what it could do... I have a free app called ChordAnalyser that I use occasionally. I'm using iOS so I would just search the App Store.
- unix-guy
- Post #2
- Tuesday at 12:30 AM
- Forum: The Lounge
Change effects order for foot switches

What manual did you look at? The Footswitch Functions Guide should cover all of it. Switches are switches, and you can define what each switch on each part does. Effects control switches know nothing about the presets unless you've assigned per-preset switches. If you assign a switch to...
- unix-guy
- Post #3
- Monday at 9:22 PM
- Forum: FM9-Edit
Axe-Fx III Firmware 25.01 Release

Literally! ;)
- unix-guy
- Post #51
- Monday at 9:16 PM
- Forum: Axe-Fx III Discussion
FM3 Edit Selecting Scene 1

It should work as @JoKeR III commented if you've got the setting I mentioned. It works that way for FM9 and Axe Fx III... I haven't validated on FM3 since my son is using mine at this time.
- unix-guy
- Post #12
- Monday at 9:08 PM
- Forum: FM3-Edit
Is this noise normal?

But the cable without a guitar isn't a useful case... Both are acting as an antenna for the EMI... Do you have LED or florescent lights in your house? Or light dimmers? If you unplug the laptop power adapter from the electrical outlet and power off the laptop do you still get the noise...
- unix-guy
- Post #16
- Monday at 7:46 PM
- Forum: FM3 Discussion
CS Midi Question with Boss SY-200 - help desperately needed please!

What does your config of the switch look like? Is it using the correct midi channel? Is it using the correct CC#? Is it using the correct CC data value?
- unix-guy
- Post #3
- Monday at 4:23 PM
- Forum: FM9 Discussion
FM3 Edit Selecting Scene 1

To be clear, you have the Global Default Scene value set to "1"?
- unix-guy
- Post #9
- Monday at 4:19 PM
- Forum: FM3-Edit
Laptop/EMI question

Well, that post is actually saying he doesn't have issues with it... ;)
- unix-guy
- Post #12
- Monday at 4:10 PM
- Forum: Axe-Fx III Discussion
Control Switch Assignment assigned to a scene

Probably simplest to add a 4th option to CS Per Scene: "Scene Last" or something like that. I seem to recall this discussion happened before so possibly already a wish... Edit: https://forum.fractalaudio.com/threads/new-cs-per-scene-value.169551/
- unix-guy
- Post #9
- Monday at 4:08 PM
- Forum: FM9 Discussion
FM3 Firmware Version 8.00 beta 1

Sounds like a crash... If it happens again take note of the preset you were changing to when it happens.
- unix-guy
- Post #558
- Monday at 3:53 PM
- Forum: FM3 Discussion
FM3 Firmware Version 8.00 beta 1

I normally start the Tuner via Footswitch so I don't recall for sure, but don't you need to press the Tuner button again to exit not the Exit button?
- unix-guy
- Post #557
- Monday at 3:51 PM
- Forum: FM3 Discussion
Not a Bug Volume Block Before vs After Amp

Best != Most accurate I would agree that most accurate would be 0, but some may prefer the amp to have more or less dynamics at the input stage.
- unix-guy
- Post #10
- Monday at 3:47 PM
- Forum: Axe-Fx III Discussion
Not a Bug Volume Block Before vs After Amp

Do you happen to have auto engage enabled on the Volume block?
- unix-guy
- Post #5
- Sunday at 11:37 PM
- Forum: Axe-Fx III Discussion
FM3 Firmware Version 8.00 beta 1

https://forum.fractalaudio.com/threads/fm3-firmware-version-8-00-beta-1.203657/post-2549525
- unix-guy
- Post #544
- Sunday at 10:00 PM
- Forum: FM3 Discussion
TUTORIAL: In depth MFC-101 programming guide for the Axe-Fx III

I'm not clear what you're asking... That's what it's really designed for. There is a setting in there that lets you tell it which Fractal device you're connecting to. Is that what you're looking for? I haven't used one in more than 5 years so I don't recall the details but it should be in the...
- unix-guy
- Post #57
- Sunday at 9:59 PM
- Forum: Axe-Fx III Discussion
Can FM3 FSW's be set up to go Up / Down by 3 Pre-sets for each Press (?)

No, unfortunately I don't believe either function you want is accessible via midi. Something like the RJM MGMT controllers might be able to but they are a) very expensive and b) bigger than the FM3. Banks only make sense with the FMs and/or FCs because the bank is relative to the switches on...
- unix-guy
- Post #6
- Sunday at 9:55 PM
- Forum: FM3 Discussion
Is this noise normal?

Unplug the cable from the FM3...
- unix-guy
- Post #10
- Sunday at 9:50 PM
- Forum: FM3 Discussion
Control Switch Assignment assigned to a scene

The CS Per Scene settings are per scene, hence the name. When a CS is set to Last, it inherits the last value it had regardless of the scene you came from.
- unix-guy
- Post #2
- Sunday at 6:18 PM
- Forum: FM9 Discussion
Bug? Lockup+high-pitched whining sound on AF3mkII

There may have been enough level to excite the pickups and generate feedback. I had that happen surprisingly to me with my HD-650s (semi-open) before.
- unix-guy
- Post #61
- Sunday at 6:12 PM
- Forum: Axe-Fx III Discussion
Is this noise normal?

Try enabling the Noise Reducer mode of the Input Gate and make sure to set the global AC Line Frequency to match what is used in your country. Also, what happens if you unplug your guitar and cable from the FM3?
- unix-guy
- Post #2
- Sunday at 6:06 PM
- Forum: FM3 Discussion
Bug? Lockup+high-pitched whining sound on AF3mkII

Are your headphones open-back (or semi-open)?
- unix-guy
- Post #59
- Sunday at 5:59 PM
- Forum: Axe-Fx III Discussion
Can FM3 FSW's be set up to go Up / Down by 3 Pre-sets for each Press (?)

Since you're almost certainly doing this to jump presets by bank, you can also set Bank Size to 3 and use a Bank Increment/Decrement instead... And another push for you to read the Footswitch Functions Guide which would have quickly answered your question ;)
- unix-guy
- Post #4
- Sunday at 3:58 PM
- Forum: FM3 Discussion
[solved] Missing User Cabs after upgrading to FW25.01

You could have also gone into Manage Cabs and clicked the "refresh" icon... Seems like Axe-Edit somehow lost its "cache" of the IRs, or possible didn't load them correctly when you updated it.
- unix-guy
- Post #2
- Sunday at 3:48 PM
- Forum: Axe-Fx III Discussion
Wish Block status on the main screen

That Return block level bites everyone! But it's like that for a really good reason...
- unix-guy
- Post #25
- Sunday at 3:39 PM
- Forum: FM3 Wish List
Wish "Deacy Amp" on Amp and Cab Blocks (Original Equipment and Circuit Diagram included)

Oh, yeah... I see that now (both things :))
- unix-guy
- Post #19
- Sunday at 3:36 PM
- Forum: Axe-Fx III Wish List
Wish "Deacy Amp" on Amp and Cab Blocks (Original Equipment and Circuit Diagram included)

You gotta learn how to use the quote feature on the forum, man ;) I am suspecting maybe @km 202257 was trying some (not so) subtle reverse psychology in his post...
- unix-guy
- Post #17
- Sunday at 1:27 PM
- Forum: Axe-Fx III Wish List
PA Speakers or FRFR ?

Most of the good solutions have 60-90 degrees of dispersion in both directions, which is far wider than a normal guitar Cab, at least for high frequencies. The PXM-12MP has 90 degrees of dispersion for both...
- unix-guy
- Post #31
- Sunday at 1:25 PM
- Forum: Amps and Cabs
I can't get to work FX Loop on AX8 with MATRIX GT1000FX 1U

That preset appears to be designed for use with a REAL guitar amp plus FRFR...
- unix-guy
- Post #8
- Sunday at 1:15 PM
- Forum: AX8 Discussion
I can't get to work FX Loop on AX8 with MATRIX GT1000FX 1U

No. You can avoid that by setting Out 2 Echo to Output 1. That would send the same signal going to Output 1 to Output 2 (FX Send).
- unix-guy
- Post #7
- Sunday at 1:14 PM
- Forum: AX8 Discussion
Wish Block status on the main screen

But you control what is "empty"... As I said: Which @yek demonstrated after I posted that (without zoom mode).
- unix-guy
- Post #23
- Sunday at 1:06 PM
- Forum: FM3 Wish List
Wish Block status on the main screen

I think you don't understand what Send/Return blocks are for... Which is exactly what they are used for in the preset shown. Sending signal in or out uses the Input and Output blocks.
- unix-guy
- Post #22
- Sunday at 1:03 PM
- Forum: FM3 Wish List
Initial preset scene

Check your global setting for Default Scene ;)
- unix-guy
- Post #2
- Sunday at 1:55 AM
- Forum: FM9 Preset Exchange
CS for Amp Channel changes

He's talking about using the loopback midi cable. If one switch alternates between sending the CC (for channel of Amp and Cab blocks) with values of 0 and 2, it will toggle between Channels A and C. The other switch sending values of 1 and 3 will toggle between Channels B and D.
- unix-guy
- Post #14
- Sunday at 1:53 AM
- Forum: FC-12 and FC-6 Controllers
New DynaCab Pack! 1x12 Freed Man "Red Back"

I believe what Dave meant is that when selecting the SIC parameter, is it doing anything (behind the scenes) other than setting the previously mentioned knob values in the speaker page...
- unix-guy
- Post #38
- Sunday at 1:48 AM
- Forum: News
Wish Looper - Delayed Start of Recording

I'm pretty sure now you're just toying with me? ;)
- unix-guy
- Post #9
- Sunday at 1:43 AM
- Forum: Axe-Fx III Wish List
No sound/audio when making preset

Hey, that's my line! :)
- unix-guy
- Post #7
- Apr 20, 2024
- Forum: FM3 Discussion