dicXjonesify
Inspired
Why would Fractal make the pedal jacks work differently on the FM9? I don't get it.
There’s only 12 switches in a layout. FM9 has 9 already so only 3 are available to be configured.
Why would Fractal make the pedal jacks work differently on the FM9? I don't get it.
That doesn't make any sense... A layout is only relevant to external switches when you're using stand-in switches. And there are 8 layouts, each with 3 "unused" switches...There’s only 12 switches in a layout. FM9 has 9 already so only 3 are available to be configured.
Yup. 3That doesn't make any sense... A layout is only relevant to external switches when you're using stand-in switches. And there are 8 layouts, each with 3 "unused" switches...
Times 8Yup. 3
Come on, everyone knows that 8x3=3. Eight times.Times 8
To be perfectly honest, It’s a bit confusing to me as well. Seems like you’d default to the way the FM3 works so changing it would be a very conscious decision. Still, I’ll be just fine with no external switches I think.Why would Fractal make the pedal jacks work differently on the FM9? I don't get it.
There is, but it only seems to work for Pedal #1 - #2 and #3 only work correctly with a Normally-Open switch like the Dual Mosky. I swapped my under-board switches with the ones in one of my Mosky boxes, and have been able to move forward, but there's deffo a bug in there.Isn’t there a setting for that?
FC 6 with the FM9? I was thinking about that, but thought it might be overkill. Can’t see needing more switches if I use the FC6.There is, but it only seems to work for Pedal #1 - #2 and #3 only work correctly with a Normally-Open switch like the Dual Mosky. I swapped my under-board switches with the ones in one of my Mosky boxes, and have been able to move forward, but there's deffo a bug in there.
Oddly enough, the FC6 pedal jacks want NC switches (and lack the polarity setting), so I moved the Mosky there, and split it to pedal jacks #3 & #4 via an insert adapter.
FM6 with FX3 and FM9. Plus 8 external switches on the FC6 and two on the FM9.FC 6 with the FM9? I was thinking about that, but thought it might be overkill. Can’t see needing more switches if I use the FC6.
OMGYAURFM6 with FX3 and FM9. Plus 8 external switches on the FC6 and two on the FM9.
The OMG-R-U-NVTS-25 set-up....
Ah man, what a bummer. Have enjoyed using a 2-button switch with my FM3 for Preset +/- and was planning to do do the same with the FM9.
Ah man, what a bummer. Have enjoyed using a 2-button switch with my FM3 for Preset +/- and was planning to do do the same with the FM9.
I don't think this particular cable will be long enough and I'm searching for an alternative. I measured the distance between the jacks and the edge of the FM9 and it's about 12" (the length of the cable). I plan to have the switch beside the FM9 and need something about another 5-6 inches long. Or, looking for ideas on where to place the switch.
I thought about mounting it right on top over the Fractal logo hahaha. Good spot but I don’t want to do that.I don't think this particular cable will be long enough and I'm searching for an alternative. I measured the distance between the jacks and the edge of the FM9 and it's about 12" (the length of the cable). I plan to have the switch beside the FM9 and need something about another 5-6 inches long. Or, looking for ideas on where to place the switch.
Side note: it is a little silly that the pedal jacks are in the middle and not the right end, isn’t it?I don't think this particular cable will be long enough and I'm searching for an alternative. I measured the distance between the jacks and the edge of the FM9 and it's about 12" (the length of the cable). I plan to have the switch beside the FM9 and need something about another 5-6 inches long. Or, looking for ideas on where to place the switch.
The same thing is/was running through my head... great minds.I thought about mounting it right on top over the Fractal logo hahaha. Good spot but I don’t want to do that.
There are other TRS insert cables out there but not many have right angle ends. Here’s one…
https://www.sweetwater.com/store/de...MmQ4qlpRThpcrfBqlsRoCKEQQAvD_BwE&gclsrc=aw.ds
I don't think this particular cable will be long enough and I'm searching for an alternative. I measured the distance between the jacks and the edge of the FM9 and it's about 12" (the length of the cable). I plan to have the switch beside the FM9 and need something about another 5-6 inches long. Or, looking for ideas on where to place the switch.