sgplayer76
Inspired
Hi, I found a Bug/Glitch in the Intel Harmony Effect (Axe-FX Standard, FW11.0)
When using Intelligent Harmony, Chromatic Scale, and -2 for one (or both) of the Voice Harmony settings (Voice Harmony 1 and/or 2), the -2 Voice Harmony value is lost (becomes inaudible) when changing to another patch, then back. For example, if I have a Pitch/Intel Harmony effect block saved to patch #1, switch to patch #2, then switch back to #1, the -2 value in the effect no longer has sound. I have to manually "edit" the effect block and change the voice harmony value from -2 to any other value, then back to -2 to get the sound back. Doing this works as long as you stay in the patch - as soon as you go to another patch, the value is lost again (saved or not). Listed below are my basic settings for Intelligent Harmony. I use a Mission Engineering EP1 pedal to control the effect mix. The problem occurs with or without the pedal.
Master Delay: 100%
Master Pan: 100%
Master Level: 100%
Voice 1 Detune: 0.0 ct
Voice 2 Detune: 0.0 ct
Key: E
Scale: Chromatic
Track Mode: Smooth
Tracking: 10.00
Glide Time: 1.0 ms
Voice1 Harmony: 3
Voice2 Harmony: -2 (this seems to be the culprit)
Voice1 Level: 0.0 db
Voice2 Level: 0.0 db
Voice1 Pan: 0.0 db
Voice2 Pan: 0.0 db
Voice1 Delay: 0.0
Voice2 Delay: 0.0
Voice1 DlyTempo: None
Voice2 DlyTempo: None
Please let me know if you have similar issues.
Thanks!!
When using Intelligent Harmony, Chromatic Scale, and -2 for one (or both) of the Voice Harmony settings (Voice Harmony 1 and/or 2), the -2 Voice Harmony value is lost (becomes inaudible) when changing to another patch, then back. For example, if I have a Pitch/Intel Harmony effect block saved to patch #1, switch to patch #2, then switch back to #1, the -2 value in the effect no longer has sound. I have to manually "edit" the effect block and change the voice harmony value from -2 to any other value, then back to -2 to get the sound back. Doing this works as long as you stay in the patch - as soon as you go to another patch, the value is lost again (saved or not). Listed below are my basic settings for Intelligent Harmony. I use a Mission Engineering EP1 pedal to control the effect mix. The problem occurs with or without the pedal.
Master Delay: 100%
Master Pan: 100%
Master Level: 100%
Voice 1 Detune: 0.0 ct
Voice 2 Detune: 0.0 ct
Key: E
Scale: Chromatic
Track Mode: Smooth
Tracking: 10.00
Glide Time: 1.0 ms
Voice1 Harmony: 3
Voice2 Harmony: -2 (this seems to be the culprit)
Voice1 Level: 0.0 db
Voice2 Level: 0.0 db
Voice1 Pan: 0.0 db
Voice2 Pan: 0.0 db
Voice1 Delay: 0.0
Voice2 Delay: 0.0
Voice1 DlyTempo: None
Voice2 DlyTempo: None
Please let me know if you have similar issues.
Thanks!!
Last edited: