unix-guy
Master of RTFM
I prefer Dream blankets...Dream rugs
I prefer Dream blankets...Dream rugs
I have FW 1.17 currently installed, I'm thinking of buying the set
I assume 1.17 will work with the current set of patches?
I was about to install 2.00 then thought I should wait - should I install that?
All existing Naked Amps Axe-III presets will sound as designed under 2.0, as Cliff said.
Yes, I see the speaker compliance in the Amp Block now...Updated Axe Edit was was already released. Used it for about an hour yesterday.
just bought! Thanks!All existing Naked Amps Axe-III presets will sound as designed under 2.0, as Cliff said.
Axe-III edit has not been updated yet to adjust for the new speaker compliance parameters. The public 2.0 was just released, there is usually a one to two month lag before any updates are available.
So - you can try it to taste. If you like it, use it. Unlike the other TonePacks, I do mostly use the default speaker compression settings in the Axe-III tonepack.
Multiple signal routing options with 3 outputs. You can easily run into both a powered FRFR monitor on stage from Output 1 and simultaneously into a Front of House PA using Output 3. Or go into a DAW with Output 1 digitally, and simultaneously into a stage FRFR monitor with Output 3. Output 2 is a direct signal tapped off the amp block (no cab or wet effects) for those using powered amps and real guitar speaker cabs.
Is it possible to include the wet effects with the output to a poweramp + guitar cab?
Yes would but would need to disable both the CAB Blocks in the preset. I'm not sure if there isa FracTool application for the Axe-Fx III am;p but I know you can do batch setter in other units to turn a preset on/off globally. But remember, the Cab is 1/2 the tone/sound -- the presets won't sound as designed if you run a Tweed champ into a 4x12 Marshall for example.
Oh I thought you had the Axe-Fx III version. So it's different for the 700+ AX8. There is a tap off the amp with no cabs, BUT any wet effects may be after the tap. You would need to disable the Cab for Out1 then use that output with power amps and cabs.Ok thanks! I have the 700 Naked tone pack for AX8 (but just sold the AX8 and ordered a FX III couldn't resist the black Friday temptation!). Hoping to use it in a similar fashion. In the AX8 I run L/R out to my Apollo Twin that is connected to two studio monitors. I also run an FX loop to a Powerstage 170 into a regular 2x12 cab for when I want to feel some air move in my basement To do this I had to move the cab block to the end of the chain and then place the FX loop right above/before it so It got all the effects.
I need more info. The TonePack uses 1 1/2 banks of space. But don’t worry, you can always re-load the Factory presets and overwrite again.I had to overright FAS preset bank 3 to fit them all in. Did I do that right?
I need more info. The TonePack uses 1 1/2 banks of space. But don’t worry, you can always re-load the Factory presets and overwrite again.
Yes, the tone pack uses 1.5 banks. The unit has 4 banks. So I placed the AB pack one into the axes bank 3, and the AB pack two into the empty bank 4. Yep, I can reload up axes bank 3 anytime.I need more info. The TonePack uses 1 1/2 banks of space. But don’t worry, you can always re-load the Factory presets and overwrite again.
There are 512 slots... divided into 4 banks each containing 128 slots. It comes preloaded with presets in banks 1-3.. leaving bank 4 empty for additional presets. So if you want to add 256 additional presets... you would need to eliminate 128 factory presets that came with the unit.Hey Buddy, I am new with the lll. I had asked this question elsewhere and was under the impression that i had 512 slots only available to overwrite in the lll.
I don’t see preset bank 3 in Axe fix 3, so are you talking about the 2 or ax8 ?
Or am i missing something ?
I have not purchased your presets, yet..
Yes, helpful. And I can live with that comfortably enough.Guys: Fractalbot and Axe-Manage presets in the Axe-III edit are how you manage presets.
You can always download the factory presets any time.
You can save any bank of presets, or individual presets, to your computer’s hard drive and then call them up at will. You don’t have to store everything on your Axe-FX III at all times.
To start out, Some people put the TonePack in banks 3 and 4. They overwrite bank 3.
Others save all the factory presets to their computer with FractalBot, then put the TonePack in banks 1 and 2, then load Factory bank 1 into Bank 3 and use Bank 4 to load factory banks 2 then 3, auditioning and saving the presets they want to use.
Others use Axe III edit to audition the Tonepack presets (you can do that without saving to unit memory using Axe-Edit’s preset manager — see my 7 part YouTube tutorial on how to use Axe-Edit). They then just drag and pull over the presets they like best into empty preset spacce/banks.
Hope that helps you newcomers out. Well to Fractal land and enjoy!
Yes, that answered my question regarding the banks. It was answered before, but i wanted to make sure there wasn’t a hidden list of banks..like the cab block blanks have user 1 and 2 , etc, so i was just making triple sureYes, helpful. And I can live with that comfortably enough.
Tone pack sounds great