Frozen
Inspired
After several matching tries, i felt like the results were pretty close, but not absolutely identical. For me there seemed to be more low and high end after the matching. So what i did was matching the usual way via tma block first. With that tone, i recorded the riff i matched in my DAW and compared it eq-wise to the original with ozone. The result: From 90Hz to about 10khz the eq-spectrum is accurate, while the original track seems to have a lot less db beneath ~100Hz and above ~10kHz. I tried this with about 5 different references and it was always the same.
So long story short: Put an Parametric EQ after the TMA block. Set Band 1 to Blocking @90Hz, Band 5 to Blocking @10-11kHz. At least for me that did quite a bit. If you feel it's still not there you could try to put another peq afterwards.
So long story short: Put an Parametric EQ after the TMA block. Set Band 1 to Blocking @90Hz, Band 5 to Blocking @10-11kHz. At least for me that did quite a bit. If you feel it's still not there you could try to put another peq afterwards.