Liquidfoot Phantom power died??

Craig Walker

Inspired
I just setup my LF powered my the AF back phantom power slot, with the 7 pin cable....

I was tweakin for about an hour and all of a sudden the LF went dark.

I plug it direct to the wall and it works. Back to AF phantom, nothing.

Any clue?!?
 
Do you have a voltage meter?

If you do, check to see if you are getting 9vac (I think) from the barrel plug on the power supply.
 
sorry missed that in your post.

If you have another midi cable try that..if not I would borrow a meter and see if you are getting voltage at the midi in of the Axe-Fx
 
Craig Walker said:
I just setup my LF powered my the AF back phantom power slot, with the 7 pin cable....

I was tweakin for about an hour and all of a sudden the LF went dark.

I plug it direct to the wall and it works. Back to AF phantom, nothing.

Any clue?!?

sound like a bad cable, did you try and reseat the cable?
 
javajunkie said:
sound like a bad cable, did you try and reseat the cable?


Unplugged everything, replugged.....nothing.

Everything works if I plug direct into LF.

Is there a "phantom power off" switch on the AF anywhere? A setting? Fuse?
 
Craig Walker said:
javajunkie said:
sound like a bad cable, did you try and reseat the cable?


Unplugged everything, replugged.....nothing.

Everything works if I plug direct into LF.

Is there a "phantom power off" switch on the AF anywhere? A setting? Fuse?

No but there is on the back of the liquid foot.
 
I'm aware of the LF one....didn't change it. :?

Hmm.....I was just tweaking the IAs and it blinked out after working an hour +.....

Crazy
 
I would try and find out if you have power coming through the midi cable, if there is no power there..Jeff isn't going to be able to help you. :?:
 
Switch is not moved [tried it in both positions, as I stated], so it seems to be the cable.

I'll call Jeff today when I get back home.


Thanks for the input.
 
Back
Top Bottom