Let's see those FM9 rigs!

Maurice van Wijk said:
Bu sonuçtan memnunuz:
  • Temple Audio Design Duo 34 GM
  • Yeterli alana ve kablolar için ekstra cebe sahip Temple Audio Design Duo 34 Yumuşak Çanta
  • Boss LoopStation, Boss BMIDI-2-35 TRS/MIDI Kablosu aracılığıyla FM9'a bağlandı, böylece MIDI'yi FM9 aracılığıyla yönetebiliyorum
  • Temple Audio Design XLR modülü, hem XLR karttan çıkıyor hem de sol taraftan çıkıyor. OUT1'den Fender FR-12'ye, OUT2'den PA'ya
  • Temple Audio Design 2 Yönlü Jack Patch Modu sağda
  • Sağdaki Temple Audio Design IEC Modu, bir AC ayırıcı kablosuna bağlı, biri kartın altındaki CIOKS DC7'ye bağlı ve diğeri kart aracılığıyla kendi inşa AC'sine bağlı/FM9'a bağlı
  • Ve sahnede gösterişli ışık efektleri için altına bağlanan RGB LED IŞIK ŞERİDİ MODÜLÜ. 5 konser yaklaşıyor ve bununla etkilemeyi umuyoruz:Serin:
  • Digitech Drop yalnızca ek satış konuşmaları için.
  • İki Mission Expression pedalı. Biri pedal1/2 ile değiştirilebilir, esas olarak Wah olarak kullanılır. Diğeri ise pedala3 bağlı ve şu anda hem ses hem de caydırıcı olarak kullanılıyor.

View attachment 139722
Click to expand...
Perfect..
 
Just re-wired this board. It’s a Trio 28. A few mods were required, mainly moving the handles forward. I like the additional space the Trio allows to add external pedals.
Found this case on Amazon, well made and fits the board quite well. Pluck out foam worked great and only took a few minutes for a custom fit.
 

Attachments

  • IMG_8464.jpeg
    IMG_8464.jpeg
    1.8 MB · Views: 318
  • IMG_8468.jpeg
    IMG_8468.jpeg
    3.3 MB · Views: 315
RevDrucifer said:
Rig got an update/addition today. I got a TC Electronics BAM200 to power a 2nd 2x12 cab. So far, I dig it more than the Powerstage 170, but I haven’t been able to crank up loud enough to put it’s through it’s paces. I’ve got band practice for 4 hours tomorrow then a gig after, so I’ll definitely have time then. I’m going to be bummed if I can’t play in stereo onstage due to size limitations, but man, I just took my gigging presets, copied them to new slots and changed some effects from mono to stereo and I’m in guitar nerd heaven.

Cab on the left is an old Mesa 2x12 with Black Shadows, right cab is an old Flextone with WGS Retro 30’s. The plan is to shoot some IR’s of the cabs so I can tap off the amp block and send FOH a mono DI version of my rig. Such an amazing time to be a guitar player.

View attachment 97849
Click to expand...
Hi, what model pedalboard is this?
 
ETHEREAL CEREAL said:
Just re-wired this board. It’s a Trio 28. A few mods were required, mainly moving the handles forward. I like the additional space the Trio allows to add external pedals.
Found this case on Amazon, well made and fits the board quite well. Pluck out foam worked great and only took a few minutes for a custom fit.
Click to expand...
Nice! I have a question for you, Is the FM9 screwed down on the Trio 28? or is it overlapping? I've been checking out Pedal playground and the Temple planner and I'm having a hard time figuring out how you've managed to fit the FM9 and two EP-3's on the board. The planners are showing that they don't fit. Am I missing something lol? I can see you've moved the handles up a little. Is that the trick?

I have mine on a duo 34 at the moment with an EV-2 and a Mission EP-1 but I was thinking of putting on a trio 28 just so I can get it to fit in a smaller Pelican case.
 
Last edited:
Yes, the FM9 is screwed down and is flush with the left side and bottom of the Trio 28. Moving the handles forward was the key to getting everything to fit.
 
ETHEREAL CEREAL said:
Yes, the FM9 is screwed down and is flush with the left side and bottom of the Trio 28. Moving the handles forward was the key to getting everything to fit.
Click to expand...
Thanks for the reply, really appreciate it! I think I might try and swap boards over, I can always use another EV-2 instead of the Mission. That way it all should fit nicely.

Thanks again

Paul
 
Paulg2uk said:
Thanks for the reply, really appreciate it! I think I might try and swap boards over, I can always use another EV-2 instead of the Mission. That way it all should fit nicely.

Thanks again

Paul
Click to expand...
I forgot to ask, how did you mount the EP-3's? Are they screwed down too? Or did you use Velcro or Temple's pedal plates?
 
Last edited:
ETHEREAL CEREAL said:
Just re-wired this board. It’s a Trio 28. A few mods were required, mainly moving the handles forward. I like the additional space the Trio allows to add external pedals.
Found this case on Amazon, well made and fits the board quite well. Pluck out foam worked great and only took a few minutes for a custom fit.
Click to expand...
I have the trio28 too. Do you have a link for that case?
 
You must log in or register to reply here.
Back
Top Bottom