20mm is more than really needed. I used 16mm (recommended) and was more than long enough.
Awesome! WDW ?
Very nice !
Still W/D/W ?
Awesome! WDW ?
It's gonna be insane.OUT3 for the DRY and OUT1 or OUT2 for the WETS ?That's the intent. I haven't even gotten a chance to test it out yet
Out 1 for wet and 3 for dry. At least initially.It's gonna be insane.OUT3 for the DRY and OUT1 or OUT2 for the WETS ?
You may find things with really short delays (like flange) sound weaker in the stereo wet pair than on the mono dry center speaker....Out 1 for wet and 3 for dry. At least initially.
Hate to promote China, but whatever. Jeff B is rich enough too and in Europe they don't have these on Amazon.What size/type screws are in FM9?
16mm not 6mm...Hate to promote China, but whatever. Jeff B is rich enough too and in Europe they don't have these on Amazon.
$1 for 10. Check M3.5 and 6mm. Or 8.
Mouser and Farnell charge $20 for shipping alone over here. Shipping from China is free. Go figure.
https://nl.aliexpress.com/item/1005004205195130.html
I typically put flanger and phaser before the amp block.You may find things with really short delays (like flange) sound weaker in the stereo wet pair than on the mono dry center speaker....
Then you're golden. The delays in flanging are short enough that the distance between the speakers is enough to mess with the effect if mixing the dry and wet in the air from separate speakers. I found that one out 25 years ago doing WDW with the old Quadraverb2. Roughly, 1ft. = 1 ms, and flanging lives in the single digit milliseconds range, generally....I typically put flanger and phaser before the amp block.
Still loving this build.
View attachment 126780
My rig that you see above is a Duo 34, so it can fit a FM9 and three expression pedals with a little bit of air space around the FM9 for the vents. I have had the board for years, and have been using the same setup with an AFX3/FC-12 since 2019. It has been fantastic.Hi folks, thanks for showing your rigs !
I’m about ready to get some kind of pedal board and the plan is:
1- an FM9 and 2 mission expression pedals, one with a spring.
2-one pedal devoted to volume, heel back to tuner
3-one spring pedal devoted to effect based on preset
I’ve seen a lot of great ideas, looks like the Duo 34 is a strong contender.
I just want easy at the end of the day…easy to set up, easy to take down.
Any suggestions would be MOST appreciated. Thanks !