Let's see those FM3 rigs!

Rockboard Quad 4.1 arrived today. Pedal Playground worked perfectly for planning the layout, looks like it’s going to be a neat solution. XSW-D receiver mounts underneath board on tray. I use the tuner on the FM3 so only need to see the battery level indicator light through the grill. Mod 3, flat cables, Joyo noise blocker, engl power tap (both for faslink power) and spare transmitter arriving Monday so will update on progress when finished.
IMG_4111.jpeg
 
eddyrox said:
man all of these Temple Audio boards!!! i'm feeling the need to try one - i love how need the cabling is laid out, but those side patch bays are aweseome! How is that Fender FR10 sounding? :)
Click to expand...
Really liking the FR-10. MUCH easier on my old bones than the beastly Xitone - which I still love to pieces but it's a monster. The additional tone/volume shaping with the FR-10's controls is fantastic.
 
If you play live and deal with blacked out stages, some sort of patch bay is a great idea to prevent broken connectors on any floor unit, either by the built-in options on many pedalboards, or by building your own patchbay as I have (assuming you can solder etc?).

This 12" X 18" pedalboard complete with cheap case, DIY patchbay and cabling cost around $100, including clockable XLR's and right-angle MIDI connectors, D-Series punched project box, plus the D-Series 5-Pin DINs and XLR connectors, and the D-Series1/4" connector.





Apologies, crummy light in studio.
 
Last edited:
I have noticed that with the FM3 two more Switches are enough for me to go up and down with the Presets and tap tempo. It's amazing already with the combination of the three Switches ( I use a Preset for each song, anyway I have space and it works as a virtual playlist! ) And when 8.00 arrives then it will be perfection!

IMG_4234.jpeg
 
Madtone said:
Rockboard Quad 4.1 arrived today. Pedal Playground worked perfectly for planning the layout, looks like it’s going to be a neat solution. XSW-D receiver mounts underneath board on tray. I use the tuner on the FM3 so only need to see the battery level indicator light through the grill. Mod 3, flat cables, Joyo noise blocker, engl power tap (both for faslink power) and spare transmitter arriving Monday so will update on progress when finished.
View attachment 138122
Click to expand...
Does the whole board fit when putting in the soft case?
 
Dakamoman said:
Does the whole board fit when putting in the soft case?
Click to expand...

Mine fits in the Rockboard 4.1 soft case ... the top of the case puffs out a bit, but I can do the zip up and put a few things in the pockets.

I have a small pull along suitcase for gigs (a carry on luggage style one). I haven't tried it in that yet, but that will be my go to if I need to carry it around more regularly.
 
Doogz said:
Mine fits in the Rockboard 4.1 soft case ... the top of the case puffs out a bit, but I can do the zip up and put a few things in the pockets.

I have a small pull along suitcase for gigs (a carry on luggage style one). I haven't tried it in that yet, but that will be my go to if I need to carry it around more regularly.
Click to expand...
Happy to hear that! Ordered my 4.1 yesterday but my friend told me to be careful cuz the FM3 is too thick. Now we're good to go :D
 
Not my rig but I went to see the incredible Mezzoforte at Fasching in Stockholm and, yep, the FM3 were there hooked up to Friðrik Karlsson’s Fender Twin Reverb. Had a brief conversation with him at the end of the show and the the Twin Reverb was the sound out for the audience while the FM3 was used for the in ears along with effects. Sounded really good!

IMG_9228.jpeg
 
oceanruckus said:
Here's my setup. I sold my AX8 when the FM3 was announced (actually made $ on my sale). Unfortunately I was in a weird Fractal-less purgatory. I picked up a few pedals that I have enjoyed before I went all Fractal and used a Kemper (never really liked) and a Strymon Iridium (good little pedal). Forgotten how much I enjoyed twisting knobs on the fly and having physical pedals...so I decided to go with a more modular approach to my rig. I miss the interaction of a treble boost/OD pedals and my guitar volume knob. I run my OD pedals in front of the FM3 and my delays in a loop. I can always pull off the FM3 for fly/quick gigs. It's so nice to be back in the Fractal world...the Nintendo controller is a a couple of stand in switches for FM3. I also use the roller knob for expression for the FM3. The FM3 controls the DPC.micro (different flavor drive pedals) via midi. The smart clock sets the time for the FM3/DL4/Tonal Recall and is controlled by the midi.baby. Mounted everything on a Creation Aero Flatboard and build a live in case for it. View attachment 70704View attachment 70705View attachment 70706View attachment 70707
Click to expand...


Updated 2024 board...still rocking the FM3! Signal path is custom 2 loop switcher that switches between my treble boost (red) and Cusack Screamer Fuzz. From there it runs into the Archer clean klon boost. Got the Flint in the loop after the cabs. I use the midi baby as a tuner/runaway delay switch. Mini expression pedal to control plex verb mix (ran via midi baby also. I also use the SmartClock to control tempo for songs instead of switching presets. I use one per guitar...got a pretty complicated signal path within the FM3...I'll post it one of these days. Oh yea, added blue led glow lights on the bottom because I'm a sucker for led lights. I use my Strymon power supply to power them. IMG_3143.jpeg
 
Dakamoman said:
That's neat! Did you mount the Fm3 with velcro or sth else?
Click to expand...

Yep ... heavy duty 3M Velcro. I need a bloody screwdriver to pry it off!

I screwed in the other components though - the wireless is pretty light, but there is a bit of heft to the FM3T and the expression pedal. I thought screws were safer for those ...

:)
 
Doogz said:
Yep ... heavy duty 3M Velcro. I need a bloody screwdriver to pry it off!

I screwed in the other components though - the wireless is pretty light, but there is a bit of heft to the FM3T and the expression pedal. I thought screws were safer for those ...

:)
Click to expand...
Saw some washers under the board, did you use them instead of drilling holes?
 
You must log in or register to reply here.
Back
Top Bottom