Ive gotten a response from the Simplifier company and this is what was advised.
"
Hello Jeffrey!
Simplifier will work fantastic with your FX-8, it’s an awesome effects processor.
We recommmend doing this way:
If you’re using the distortion and compression effects from your FX-8, please go directly to THE INPUT of the SIMPLIFIER, then, setup the stereo effects from the FX-8 and conect the SEND output to the FX LOOP input of the FX-8, then connect the OUT (POST) to both RETURNs on the Simplifier.
This way you’ll be using some distortion/comp effects into the mono preamp on the Simplifier and then the Wet effects to the stereo CabSims.
This way you’ll be taking advantage of stereo features on the FX-8 and Simplifier.
Please set properly the gain and volume controls of the preamp to avoid clipping on FX LOOP.
Best regards!
Jano
I went with your suggestion, getlostinsound, however I did come across a problem.
Heres how I did it as a recap.
Guitar > FX8 input
FX8 OUT (PRE) Left > Simplifier INPUT
Simplifier SEND > FX8 IN (POST) Left - send
FX8 OUT (POST) Return Left and Right > Simplifier Return Left and Right
Everything seemed to work great, my pre and post effects sound good. However on TRUE BYPASS mode I can only get a MONO Signal from the simplifier. Any recommendations? Thank you!!!