Lupo
Member
Thank you very much!Our web site and this forum will an FM3 layouts for the Setlist/Song feature. I'll post a separate thread.
Thank you very much!Our web site and this forum will an FM3 layouts for the Setlist/Song feature. I'll post a separate thread.
Thank you very much! I will try and install this when I am at home again!@Lupo Here's a quickie to get you started. You can load it overtop of any layout you aren't using.
One thing though -- it doesn't have a way to get back to the MLM. You can do that using knob E on the Home Screen.
View attachment 110639
Hey Matt, how can I incorporate my fc6 into this mix? such as once I hit the middle button for sections my fc6 displays all the sections 1-6? I guess I need to read the manual. This is a bit different from the Ax8...@Lupo Here's a quickie to get you started. You can load it overtop of any layout you aren't using.
One thing though -- it doesn't have a way to get back to the MLM. You can do that using knob E on the Home Screen.
View attachment 110639
Well, ultimately it depends on what YOU want, but I have some good experience with what works for the average live performance, so I will also make an OMG9 with Song/Set before FW6 is released as production firmware.Hey Matt, how can I incorporate my fc6 into this mix? such as once I hit the middle button for sections my fc6 displays all the sections 1-6? I guess I need to read the manual. This is a bit different from the Ax8...
Yeah, I noticed my Deluxe Reverb preset was noticeably darker after installing B2, so I tweaked it back. Need to go through the rest, I have maybe 30 to 40 song-specific, and maybe 10 kitchen sink types, between 2 bands. No biggie. Well worth it for the upgrades.My two cents….. Loaded Beta 6.3 and the new FM3-edit. I have an issue most users may not….. My band does covers of 450+ songs. I have built each song as a separate preset with the correct amp used by the original guitar player and have the presets in alphabetical order (I bring a laptop to gigs so I can load as needed). Anyway…. For every one preset I now check that’s OK, two are all muffled or darker or whatever. So now I have determine if I want to feel the pain of fixing all the bad presets, or…. just roll back to version 5 and go through all the pain and suffering later….
The release notes will specify when block resets are needed. You do read the release notes, right?Curious if there is an amp block reset etc required for this update like when we went from Ares to Cygnus? Or just minor adjustment if required?
hello sorry but how do you get the setlist with a personal view the cursor does not scroll? and one never knows where he is thanksCiao @rglr,
Ecco i preset e le descrizioni discussi in beta2.
Grazie,
Gioacchino
Ora in beta 3
Windows 10
1) Valori standard di compressione
Per i passaggi, vedere di seguito
Preset creato aggiungendo l'ultimo preset di fabbrica del riverbero deluxe
Es. Verbo Deluxe Nessun interruttore
2) ritardo di modifica fm3 quando si hanno 4 o più interruttori di controllo (ora in questa versione più ritardo da nessun interruttore e più interruttori si aggiungono)
Per i passaggi, vedere di seguito
Preset creato aggiungendo l'ultimo preset di fabbrica del riverbero deluxe
Ho impostato un interruttore a pedale per preset 1 per attivare e disattivare Drive
Ora nella versione beta 3, sembra più lento quando nessun interruttore di controllo e quindi aumenta molto per ogni interruttore ctl aggiunto.
Verbo Deluxe Nessun interruttore: ci vogliono circa 2-3 secondi per passare
Switch Deluxe Verb 3 ctl - impiega più di 6 secondi a
Switch Deluxe Verb 4 ctl - impiega più di 10 secondi a
Il primo post nella beta 2:
1) Valori standard di compressione
2) ritardo di modifica fm3 quando si hanno 4 o più interruttori di controllo
Vedere la spiegazione di seguito.
A parte questo, tutto sembra funzionare alla grande. Ho testato i propri layout/viste, il controllo midi tramite airstep, expr per wah e un altro per il volume globale, interruttori standin, utilizzando last per interruttori di controllo, interruttori di controllo, brani/setlist con vista personale e in generale e tutto funziona alla grande.
E che suono! Mi è piaciuto molto il 5.03, ma il 6 è a un livello completamente diverso, mi sembra di rimanere bloccato ad ogni preset che provo. E il bonus di ottenere molte detrazioni dalla CPU è meraviglioso! Molte molte grazie squadra FAS!!
1) Valori standard di compressione
Quando ci si scorre ad esempio dal primo all'ultimo. Riprodurre:
resettare il canale. L'analogico ha quindi 2 ms/100 ms
Passa a Compander; 10 ms
Passa a Dynamicomp 0,36 ms/140 ms
poi tutto il resto anche quando torno all'analogico ha 0,36ms/140ms e non il valore predefinito
Anche il Dynamics Processor sembra non fare nulla. Il guadagno non si muove e non sento alcuna differenza se è acceso o spento
(Il compagno sembra avere 10 ms, il resto mantiene 0,36 ms/140 ms)
2) ritardo di modifica fm3 quando si hanno 4 o più interruttori di controllo
Quando non ci sono interruttori di controllo, l'attivazione e la disattivazione degli effetti tramite l'interruttore a pedale (interno) va veloce.
Quando si aggiungono fino a tre interruttori di controllo, va bene il ritardo. Quando si aggiunge il quarto, ci vogliono circa 10 secondi prima che venga visualizzato in fm3-edit.
Hate to be the bearer of bad news....but that's going to be a miserable approach owning a piece of Fractal gear. This won't be the last time a firmware update shifts the sounds of amps, some dramatically so.My two cents….. Loaded Beta 6.3 and the new FM3-edit. I have an issue most users may not….. My band does covers of 450+ songs. I have built each song as a separate preset with the correct amp used by the original guitar player and have the presets in alphabetical order (I bring a laptop to gigs so I can load as needed). Anyway…. For every one preset I now check that’s OK, two are all muffled or darker or whatever. So now I have determine if I want to feel the pain of fixing all the bad presets, or…. just roll back to version 5 and go through all the pain and suffering later….
Try a different USB cable.Guys help. After installing 6.02 FM3, my computer (Mac and PC) stopped seeing it as a device, FmEdit is the same. Tell me how to restore the firmware to 5.03 without access to FMEdit?
Thank you. I tried. I don't think it broke when the firmware was installed.Try a different USB cable.
I don’t get this attitude. If this was some other company you would be buying a new piece of gear and having to start from scratch making presets. No one is forcing anyone to update. It’s not as if the FM3 was not as advertised from the start.Hate to be the bearer of bad news....but that's going to be a miserable approach owning a piece of Fractal gear. This won't be the last time a firmware update shifts the sounds of amps, some dramatically so.
99 times out of 100 it's the cable, and there is no warning when it fails. Does the FM3 work okay otherwise?Thank you. I tried. I don't think it broke when the firmware was installed.
I don’t get this attitude. If this was some other company you would be buying a new piece of gear and having to start from scratch making presets. No one is forcing anyone to update. It’s not as if the FM3 was not as advertised from the start.
Yes, the device works fine, but the computer does not see it. Through Fractal Bot I also can not downgrade the firmware99 times out of 100 it's the cable, and there is no warning when it fails. Does the FM3 work okay otherwise?