SoonGood news indeed! Soon?
SoonGood news indeed! Soon?
Checked out the Class-A 30w Bright in FW 3.02 and seems on par with the non-Bright. FW 4b1 was equal to 4b2 in volume being low. I'm totally unfamiliar with this Amp so maybe this is normal.I’ll check it out tomorrow.
I think you are on to something. I reset system parameters, mini display contrast defaults to 45 and works great. As soon as I change that value to something else it goes wonky. If I reboot at 45% it comes back to normal. If I reboot at any other value it doesn't. Scrolling (especially slowly) the contrast from min to max really messes with that left display and will cause it to blank out. @rglr @BryantP @Admin M@
@AJ Vargas as a test, set your contrast to 45%, reboot and I'll bet that left display is on.
Great thank you!The problem with low output2 volume will be fixed in the next beta
Is the TAP TEMPO , when you have it activated on a footswitchhello there,
I'm facing a strange "issue" in beta 2
when I change preset, scenes or FC layout, I can hear a strange crackle inside FM3 (sound similar to the HDD in Laptop). I know that there is no HDD but flash memory. I rollback to 3.03 beta 1 and no noise at all.
The noise lasts just for 0,5 sec and only when preset is changing. I think is something related to LED below FC.
Did you faced a similar thing?
Thanks a lot.
I notice the problem is related to processor load. Changing the reverb quality to one less makes it better.I'm having a problem with 4.00 beta 1 acting sluggish when changing scenes. Has this been reported?
It doesn't do it all the time (of course). Mostly I would see it when on the Swells scene trying to change back to the Clean scene. Sometimes it takes a dozen presses of the footswitch to make it change.
Reverb uses a lot of CPU.I notice the problem is related to processor load. Changing the reverb quality to one less makes it better.
Sure, I know reverb uses a lot of CPU. And your point about the quality setting and playing live is valid. In the past, though, the FM3 would just stop processing audio if I overloaded the CPU. I never had any switching issues. Maybe I was just lucky.Reverb uses a lot of CPU.
See https://wiki.fractalaudio.com/wiki/index.php?title=Reverb_block#Reverb_and_CPU_usage and https://wiki.fractalaudio.com/wiki/index.php?title=Reverb_block#Quality
I run my FM3 reverb at economy because in a band setting nobody could tell. Even with headphones on I can barely tell the difference between economy and normal.
I just saw a similar post for Axe Fx III FW 16.02 and cross-posted a link to your first post.Checked out the Class-A 30w Bright in FW 3.02 and seems on par with the non-Bright. FW 4b1 was equal to 4b2 in volume being low. I'm totally unfamiliar with this Amp so maybe this is normal.
Good to hear - had the middle mini display go blank for the first time today. reboot fixed it.These mini-LCD issues should finally be resolved in the next release as I was finally able to reproduce some of the problems seen by you all. Still undergoing testing but initial feedback looks quite promising.
I finally started having them. Had the middle one vanish when using the looper on a pretty regular sized screen reset. Had the left one dissapear one time randomly i can’t remember when hahaThese mini-LCD issues should finally be resolved in the next release as I was finally able to reproduce some of the problems seen by you all. Still undergoing testing but initial feedback looks quite promising.
When I introduced Lopper block into a preset the first mini-LCD became scrambled. I was using the EFECTS layout at that time.These mini-LCD issues should finally be resolved in the next release as I was finally able to reproduce some of the problems seen by you all. Still undergoing testing but initial feedback looks quite promising.
These mini-LCD issues should be fixed in the next beta. Please stay tuned.When I introduced Lopper block into a preset the first mini-LCD became scrambled. I was using the EFECTS layout at that time.
You know about the history of that word 'round these here parts, don't you? If not, ask Cliff.Soon
@BryantP thanks ..These mini-LCD issues should be fixed in the next beta. Please stay tuned.
I believe this is the first time it's been brought to my attention. Is there a separate thread for this?For the click noise when the tap tempo is engaged in one of the foot switch ? Did you have some news for this issue ?
@BryantP thanks ..
For the click noise when the tap tempo is engaged in one of the foot switch ? Did you have some news for this issue ?
Thanks.
A.
I don't know if it's related, but I also noticed an audible click any time I did something that caused one of the foot switch LED rings to come on (changing scenes, presets etc). I don't know if that's new with this beta though and it's not very loud. I only noticed it because I was sitting on the floor right next to my FM3 doing some editing, I'm not sure I would have heard it if I had been standing.I believe this is the first time it's been brought to my attention. Is there a separate thread for this?