https://www.fractalaudio.com/downloads/firmware-presets/axe-fx-3/22p0/axefxiii_dsp_rel_22p00.zip
22.00
Version 22 Introduces Dyna-Cab™ cabinet modeling.
The Cabinet block now has two modes of operation: Legacy and Dyna-Cab. Legacy is the previous style of operation.
Dyna-Cab cabinet modeling allows freely positioning the microphone. We took an approach of quality-over-quantity:
Added “Treble Shift” control to Tone page of USA IIC+ models. This is an alias of the “Fat” control found on the Preamp page and performs the same function.
Added clip warning if Input 1 clips. This is indicated on the Mini-Tuner.
Added meters to Input page of I/O menu. Input 1 meter will turn red if clipping occurs.
Added Speaker Impedance Curves for “2x12 Class-A 30W Silver”, “2x10 Heart Key” and “4x12 1960BV”.
Added “4 Band JMPRE-1” type to Graphic EQ block. Note that the upper two bands of this type have more boost/cut range than the version in the Amp block.
Added “Revv Gen” amp models based on a Revv Generator 120. There are three models for each of the Purple and Red channels corresponding to the three levels of the “Aggression” switch.
Improved Amp block channel switching speed.
Fixed side-chain filters not working in Gate block.
Fixed a filter in the Wah block not being initialized.
Various other fixes and improvements.
Axe-Fx III Firmware Release Notes
22.00
Version 22 Introduces Dyna-Cab™ cabinet modeling.
The Cabinet block now has two modes of operation: Legacy and Dyna-Cab. Legacy is the previous style of operation.
Dyna-Cab cabinet modeling allows freely positioning the microphone. We took an approach of quality-over-quantity:
- Dyna-Cab IRs are a full 2048 samples.
- Mic positions are sampled at a fine spatial resolution.
- Four mic choices are available: Condenser, Ribbon and two Dynamic types.
- All IRs are time-aligned with each other. They have been processed using a new algorithm that ensures alignment without destroying phase information. You can mix-and-match IRs from different cabs/mics and they'll always be perfectly aligned.
Added “Treble Shift” control to Tone page of USA IIC+ models. This is an alias of the “Fat” control found on the Preamp page and performs the same function.
Added clip warning if Input 1 clips. This is indicated on the Mini-Tuner.
Added meters to Input page of I/O menu. Input 1 meter will turn red if clipping occurs.
Added Speaker Impedance Curves for “2x12 Class-A 30W Silver”, “2x10 Heart Key” and “4x12 1960BV”.
Added “4 Band JMPRE-1” type to Graphic EQ block. Note that the upper two bands of this type have more boost/cut range than the version in the Amp block.
Added “Revv Gen” amp models based on a Revv Generator 120. There are three models for each of the Purple and Red channels corresponding to the three levels of the “Aggression” switch.
Improved Amp block channel switching speed.
Fixed side-chain filters not working in Gate block.
Fixed a filter in the Wah block not being initialized.
Various other fixes and improvements.