suhr_rodney
Member
Thank you!
someone else confirmed that his Wah XY settings were set to Pedal after updating to 18.03, so i updated my article with info about that:
Possible Bug
When I installed 18.03, I had 18.01 installed previously, so I’m not sure if this affects everyone. In the I/O-CTRL menu on the Front Panel of the Axe-Fx II, the CC#s for Wah 1 X/Y and Wah 2 X/Y were both set to Pedal. These are supposed to be set to 118 and 119, respectively. A System Reset in the Utility menu will fix this and put them to default values, but it will reset much more than just that. So I recommend simply setting these values manually. Just scroll to the entries at the very end of the list, and spin the Value wheel on the Front Panel till Wah 1 X/Y is set to 118 and Wah 2 X/Y is set to 119.
MIDI communication, such as using the MFC-101, may not work correctly if these are set to Pedal.
after loading 18.03, the wrong values, both Wah X/Y set to PEDAL
after setting it manually (or a system reset)
I have an XL and mine were also set to pedal, but I noticed my Rotary 1&2 x/y were already set to 118 and 119, not 125 and 126 like in your picture. So folks may want to make sure they scroll through all of the values to make sure there's no duplicates.
Time for a clean start!
Many thanks!
At last all presets are levelled under FW18, no clipping at all. Now I cannot wait for the rest of the amps G3'd, Brit Pre above all
Sorry, complete newbie. If I download the presets, will my written patches be removed? Thanx, Joey Rotella Pro Guitarist/Vocalist - Bio