are certain amp models meant to have low volume levels?

[sundance_kiddsg]

i was always under the impression that double pressing the bypass button will reset the amp parameters to their baseline default settings.
when i did this with the new deluxe tweed model, the volume level is very low compared with other clean models (deluxe verb, double verb, etc)
the master level in the amp block had to be cranked to get an audible tone.
i now realize that the prince tone 1 and 2 models are like that also.
were these meant to be?

that aside, the deluxe tweed is likely going to be my default clean preset from here on; it sounds great!

 

[FractalAudio]

Those amps should have the Master set to near maximum. Double-clicking bypass sets the MV to 5.

 

[yek]

Yes, the volume level of the Tweed deluxe is quite low (even with Master at 9).
Don't worry, the Level parameter offers enough range to compensate.

 

[Cooper Carter]

For what it's worth, just about any amp seems quiet in comparison to a Double Verb (Fender Twin)! ;-)

 

[sundance_kiddsg]

ahh...thanks, guys, for letting me know all's well.
cheers!

 

[FractalAudio]

One of the things I've been contemplating is putting a little mark on the MV for the suggested initial setting.

 

[Mott]

I think that would be an outstanding idea.

 

[javajunkie]

One of the things I've been contemplating is putting a little mark on the MV for the suggested initial setting.

I don't think that is a bad idea at all.

 

[VegaBaby]

One of the things I've been contemplating is putting a little mark on the MV for the suggested initial setting.

+1
that is a very good idea indeed.

 

[groovenut]

One of the things I've been contemplating is putting a little mark on the MV for the suggested initial setting.

That's a good idea! A nice visual reminder of where the model baseline is.

 

[ratsgym]

That would be great!!! +100

 

[dsl]

One of the things I've been contemplating is putting a little mark on the MV for the suggested initial setting.

Awesome idea!!!

 

[Scott Peterson]

One of the things I've been contemplating is putting a little mark on the MV for the suggested initial setting.

Thumbs up on that. Would save me some hours surfing the Net researching amps I do not own or haven't tried (or can't remember how I set them!).

 

[Stillbruch]

@sundance_kiddsg: Here are some informations on the modeled amplifiers and their archetypes: AMP block: model specifics - Axe-Fx II Wiki. There are also suggestions on how the can be set.

 

[Rain]

One of the things I've been contemplating is putting a little mark on the MV for the suggested initial setting.

Cliff You Rock.....!!!

 

[why360]

One of the things I've been contemplating is putting a little mark on the MV for the suggested initial setting.

Fantastic idea!

 

[Hucky]

One of the things I've been contemplating is putting a little mark on the MV for the suggested initial setting.

+1, great idea.8)

 

[SeeD]

+1 on the MV Mark

And +3 on a nice video,on the Amp/Tone matching Tutorial
Setting up the MFC-101 and all

 

[RDH]

Exellent Idea!

 

[voes]

Excellent!