All Hail the Mighty Butch Walker

thechrissamsa said:
CS per Scene set to ON or OFF will set the state of your saturation control switch for each scene (ON or OFF).

CS per Scene set to LAST will retain the last state of that control switch globally.
Click to expand...
Ah right. This is exactly why i don't use control switches much, because they can't be made to behave like blocks do when you change scenes.

What we need is another option, LAST PER SCENE, which remembers the last setting for each scene, and recalls it when you switch to that scene. That's how blocks behave with Scene Revert off, and what i almost always want.
 
Dave Merrill said:
Ah right. This is exactly why i don't use control switches much, because they can't be made to behave like blocks do when you change scenes.

What we need is another option, LAST PER SCENE, which remembers the last setting for each scene, and recalls it when you switch to that scene. That's how blocks behave with Scene Revert off, and what i almost always want.
Click to expand...
Exactly this! If that is at all possible of course. I'll put something in the Wish area and see what response I get
 
OrganicZed said:
I think what you're asking for would be scene ignore for the control switches.
Click to expand...
No, not for me.
I want the opposite, control switches that KEEP their value PER SCENE.
That's how block bypass works with scene revert and scene ignore off.

Turn on a drive in scene 1, switch to scene 2 it's off (assuming that's how it was set in that scene), go back to scene 1 it's still on, since that's how you left it in that scene.

Perfect, for me, usually.
Not achievable with control switches.
That's the wish, my wish anyway.
New option LAST PER SCENE.
 
Last edited:
Hi everyone, like many of others, I've been really inspired by this vid and its led me to explore the amp saturation switch. I was wondering if there was a way to have a cs controller bring the saturation switch in and out but be able to save it with each scene? It seems that it's all or nothing in that, when you bring it in or out, it applies to all scenes? Hope that makes sense!
 
p30better said:
Hi everyone, like many of others, I've been really inspired by this vid and its led me to explore the amp saturation switch. I was wondering if there was a way to have a cs controller bring the saturation switch in and out but be able to save it with each scene? It seems that it's all or nothing in that, when you bring it in or out, it applies to all scenes? Hope that makes sense!
Click to expand...
After assigning the CS, go into CS Per Scene in the editor and set all scenes to LAST.
 
You must log in or register to reply here.
Back
Top Bottom