Previous customers and new buyers now access to the TonePack in 9.02 version.
Or, if you want to do it yourself...For anyone who owns the 700+ Naked Amps TonePack, if you do upgrade to 9.02 firmware, NOW you can use the latest FracTool 2.60 to change the AMP BLOCK's new default SKPR COMP of 3.0 back to 0.0 -- and that will keep the preset tones the same as in 8.02. (Many many thanks to AlGrenadine here on forum for developing FracTool!)
First, as always, use FractalBot to back up everything BEFORE you do anything. So you can always go backwards.
If you loaded up presets under 8.02 and then updated to 9.02, the update will apply a SPKR COMP value of 3.0 and change the sound some, lowering the volume slightly as well (compression).
Here is how to remove it using FracTool, which will make the TonePack preset sounds the same as the were created in FW Q8.02
1. Run FracTool. Make sure it "sees" your unit -- if you own multiple units, you may have to power one off to get it to see the one you want. See the connection message int he lower left corner.
2. Go To BATCH SETTER (a tab at top)
3. Under the top left BATCH SETTER menu, under BLOCK, choose AMP1
4. Under PARAMETER, choose SPKR COMP
5. Under SET, put a new value of 0 (zero).
6. Under apply to presets, put the range number of the Naked Amp presets you've loaded (numerical preset locations)
7. in middle of screen, go ahead and check the box that says "Apply to X and Y datasets if available"
8. The at the bottom of the screen, hit APPLY.
Also, you can now turn off the FX LOOP if you want so you can use Output2 with the Factory Cab, which I know was issue for some folk's rig set ups.
1. Under BLOCK, choose LOOP
2. No parameter setting3. Under VALUE,cChoose "Bypass Block and Save."
3. Choose preset range to apply to
4. Check the X/Y Dataset if available option
5. Hit Apply
I don't know about you guys, but I just sent a financial donation to FracTool -- this tool really make a huge difference and deserves our support! Can't wait to try FracTool on my FX8 too, soon!
Or, if you want to do it yourself...For anyone who owns the 700+ Naked Amps TonePack, if you do upgrade to 9.02 firmware, NOW you can use the latest FracTool 2.60 to change the AMP BLOCK's new default SKPR COMP of 3.0 back to 0.0 -- and that will keep the preset tones the same as in 8.02. (Many many thanks to AlGrenadine here on forum for developing FracTool!)
First, as always, use FractalBot to back up everything BEFORE you do anything. So you can always go backwards.
If you loaded up presets under 8.02 and then updated to 9.02, the update will apply a SPKR COMP value of 3.0 and change the sound some, lowering the volume slightly as well (compression).
Here is how to remove it using FracTool, which will make the TonePack preset sounds the same as the were created in FW Q8.02
1. Run FracTool. Make sure it "sees" your unit -- if you own multiple units, you may have to power one off to get it to see the one you want. See the connection message int he lower left corner.
2. Go To BATCH SETTER (a tab at top)
3. Under the top left BATCH SETTER menu, under BLOCK, choose AMP1
4. Under PARAMETER, choose SPKR COMP
5. Under SET, put a new value of 0 (zero).
6. Under apply to presets, put the range number of the Naked Amp presets you've loaded (numerical preset locations)
7. in middle of screen, go ahead and check the box that says "Apply to X and Y datasets if available"
8. The at the bottom of the screen, hit APPLY.
Also, you can now turn off the FX LOOP if you want so you can use Output2 with the Factory Cab, which I know was issue for some folk's rig set ups.
1. Under BLOCK, choose LOOP
2. No parameter setting3. Under VALUE,cChoose "Bypass Block and Save."
3. Choose preset range to apply to
4. Check the X/Y Dataset if available option
5. Hit Apply
I don't know about you guys, but I just sent a financial donation to FracTool -- this tool really make a huge difference and deserves our support! Can't wait to try FracTool on my FX8 too, soon!
Last edited: