We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Tags

aes

R
Routing Axe Fx III AES rme TotalMix Fx

I read that I could route the Axe Fx through AES but still record the dry DI from my RME UCX II. During my attempt I have signal but only from the AES output and not the AES input. Any RME users familiar with this?
- rj232
- Thread
- Oct 15, 2023
- aes rme
- Replies: 3
- Forum: Rigs and Routing
AES - Axe FX output to RME UFX II not working

I occasionally use my Axe FX 3 for re-amping. This used to work but not today. The clock is synced fine with RME as Master and Axe FX using AES. The Axe FX is receiving AES input and will play to the speaker connected directly to the Axe FX but will not output to RME thru AES. Cable tests fine...
- Phun Tunes
- Thread
- Oct 10, 2023
- aes
- Replies: 8
- Forum: Axe-Fx III Discussion
AES & Line6 Powercab 212

Not sure if this has been answered before... but I cant get this to work! could someone please walk me through this please! how do I set it up
- Mrmusic
- Thread
- Aug 12, 2020
- aes axefx3 line6 powercab
- Replies: 2
- Forum: Axe-Fx III Discussion
AES INPUT clipping early?

I'm using the AES input into the AxeIII. At -6dbfs into the AxeIII it begins to clip. Has anyone else experienced this?
- skunc
- Thread
- Feb 26, 2019
- aes
- Replies: 2
- Forum: Axe-Fx III Discussion
Understanding Clocking

I just want to ask for clarification of a few things regarding clocking. It seems I am forced to use the internal clock on the axe FX with an AES connection. I have my interface set to 48khz internal clock with the Axe on auto and it seems like there is no issue. I can also slave the interface...
- AndrewKirkland
- Thread
- Sep 24, 2018
- aes crackle master slave source tone comparison word clock
- Replies: 6
- Forum: Axe-Fx II Discussion
Axe FX II to Digital Optical In of Audio Interface

Hello, I have an Axe FX II (Mark II) and an Audient ID14 (https://audient.com/products/audio-interfaces/id14/overview/) interface. I want to use the digital output of the Axe Fx into the optical input of the interface, what are my options for doing this? And is it better to use the SPDIF or the...
- Armando
- Thread
- Apr 1, 2018
- aes axe fx 2 digital digital io interface spdif
- Replies: 10
- Forum: Axe-Fx III Discussion
Clocking Issues ( Master, Slaves, AES or AUTO)

Hello I am currently using an AXE FX 2 via AES into my Metric Halo ULN-2 interface. I am a bit confused about the proper way to clock both systems. This bit on the support wiki confused me. SPDIF/AES IN: uses the recovered clock for all input sources. A valid 48 kHz data stream must be...
- AndrewKirkland
- Thread
- Nov 24, 2016
- aes aes/spdif auto clocking metric halo uln-2 no input clock
- Replies: 16
- Forum: Axe-Fx II Discussion
TUNER CALIBRATION DOESN'T WORK WHEN USING AES CLOCK

I just noticed the tuner calibration does not work when you use AES 3 into an interface. I have the ULN-2 by metric halo and when I put the axe fx on AES clock , the signal is cleaner, but my tuner calibration doesn't work. When I put the clock back to auto the tuner calibration works ( but the...
- AndrewKirkland
- Thread
- Feb 2, 2016
- aes aes3 clocking ebu signal tuner calibration uln-2
- Replies: 1
- Forum: Axe-Fx II Discussion

Tags