Search results for query: *

  1. T

    Something a little different: acoustic grand piano tones use Axe-FX II XL as an insert

    Hey guys, I thought I'd share something a little different - some music that isn't 100% guitar based. All guitar and bass tones in this are direct Axe-FX II XL, BUT we also used it as an insert on the piano for some preamp modeling, compression, and distortion!
  2. T

    Bug? Noise Gate Bug

    Firmware: Latest (Quantum v.1.05) Model: AxeFX II XL Issue: When set to intelligent gate, the gate completely locks down, regardless of threshold at ratios above 16.00. No amount of banging on the guitar can open it up. Switching to "Classic" mode restores normal behaviour, i.e. the gate opens...
  3. T

    Reddit :)

    Hey all, Not sure if this is allowed, but I just wanted to throw it out there that there's a small reddit community for the Axe-FX and everything fractal audio! If any of y'all frequent over there, please come and give us a shout on reddit at Fractal Audio Axe-Fx Anyone else sick of...
  4. T

    Quick Question - Audio Interface Mode

    Hey guys, So I'm trying to eliminate my audio interface, since I find the Axe's conversion to be fantastic. My only issue so far is that when running the axe as a pro tools interface I'm hearing both the direct through the Axe-FX gutiar, and the guitar being monitored from PT. The...
  5. T

    Question about programming UnO w/ FCB1010 Control Center

    I'm programming my FCB1010, and I'm wondering if it's possible to have unique CC's on the stomps for each preset. That is, could I have the stomp on button 2 change from being a tremolo, to a chorus when I switch presets? Basically I want my four meat and potatoes stomps, and one that's a...
  6. T

    Axe-FX Standard Midi CC numbers

    Are they the same as the ultra? I can't seem to find a list anywhere. Thanks!
  7. T

    Sidechaining to Kick

    Hey guys, I'm playing in a loud electro group with a lot of compression and pumping which I'd like to imitate live. I was wondering if I could mic up the kick and run that into input 2 of the axe-fx, and sidechain my compression to it. I've heard that there's no way to mute the kick in...
  8. T

    Contest to see if you can tell the difference between a real amp and a modeller!

    Anyone care to venture some guesses? Think You Can Tell Amps from Models? | Tone Fiend
  9. T

    Subreddit for Axe-Fx!

    Hey all, If anyone here is a heavy reddit user like myself, I've created a subreddit dedicated to discssing the Axe-Fx, and any other Axe-Fx products. The beauty of reddit is that it is community moderated, so you can essentially say anything you want, but if a large portion of the...
  10. T

    Clipping mixer inputs

    I've just gone from using an SLA-2 and a guitar cab to some IEM's. Galaxy Audio AS900 system to be exact. Now, it's a given that these are basically bottom of the line, and I currently only have the stock earbuds, as I wait for my cusdtom moulds to turn around, but I have a couple questions...
  11. T

    Help setting up higher gain hard rock/metal sounds

    Hey all, I'm using an axe-fx Standard, still at 10.03 (waiting on a midi interface), with an Art SLA-2, and a 2x12 cab loaded with WGS British Lead 70w speakers. I'm loving the clean and mid gain tones I'm getting from the axe, they're really responsive, and a lot of fun to play, but I'm...
  12. T

    Photosynths of my modest axe-fx powered studio!

    Hey guys, check out these 360 views of the little studio I set up for the summer, largely powered by the axe-fx Standard! Motherbrain After-a - Photosynth Motherbrain After-b - Photosynth If anyone's interested, I made these using my iPhone with a free microsoft photosynth app...
  13. T

    Feedback Question.

    Hey guys! Just rejoined the Axe-Fx camp this week, after selling my first Standard somewhere around late 7.x. Needless to say, I'm floored by the strides cliff has taken in terms of the modeling and effects. Anyhow, I'm experiencing some pretty severe high frequency feedback on some of...
  14. T

    MFC Question

    Is it possible to three switches on the MFC(or any controller for that matter) to trigger backing tracks and samples that I'd have running on a reaper, pro tools, or ableton session on a laptop? thanks :)
  15. T

    Question to everyone monitoring with IEMs

    I'm really intrigued by getting a good set if IEMs - and I'm hoping it will save my hearing. But my one question is this. When playing on tour with my original band, we frequently play some pretty shit venues, that will be using a powered mixer, which may or may not even have a monitor aux...
  16. T

    My Short Story

    So, a little while ago, at the starting of 8.x, I owned an axe-fx standard. I liked it, the sheer capabilities this thing had were amazing. I used it almost exclusively on an album, and really enjoyed the sound, and the ability to create presets that fit the mix with almost no work in post...
  17. T

    What happened to all of the reviews?

    I've been away for a little while, and there are only two reviews... Where'd they go?
  18. T

    FRFR vs. Poweramp/cab

    Hey guys, I know this seems EXTREMELY redundant, but I feel this hasn't been discussed in a long time, and with the advent of the Atomic FR, and the widespread use of the QSC K's, and Verve 12ma's, AND the use of the RedWirez IR's, I'm wondering if there still even an argument. To be clear I...
  19. T

    Axe-FX Running slowly

    All of a sudden over the past couple of days, my Axe-FX standard has been a bit laggy when moving around the menus. I keep ending up going past parameters, and going past where I want to be with the value of the parameter. Any ideas as to why this is happening, and how I can fix it?
  20. T

    Controller Question

    Is it possible to program the UnO FCB1010 to send a different command for two switches pressed simultaneously, than if either of those buttons were pressed individually. In other words, could I program it so that if I press 1+2, it turns on the tuner, but if I press 1 it turns on OD, and 2 it...
  21. T

    IR Mixer issue

    I'm having some weird issues when using the IR Mixer. In short, when I click the mix button, it goes through the process and there is nothing in neither my tmp folder or my ir-mixes folder. I'm OSX 10.5, my ir Mixer program is in the base of my Red Wirez folder, and I can't seem to figure out...
  22. T

    Quick Question about Making IR's

    So, when you guys make homemade IR's what sort of power amp do you use? Something very clear and even? Or something that is more like an actual guitar amp? Thanks, sorry if my question is unclear. Dylan
  23. T

    Using Logic Sound Designer to combine and audition IR's

    Hey, I've done a search for this, but have come up empty handed. I'm wondering if I can test, and then combine custom IR's with space designer in logic. I'm not that good with logic, so I need to ask, I'd probably have to have separate tracks for each IR I'm auditioning? Can I then use...
  24. T

    Quick question

    Hey, a while back I came on here whining about my sounds. To make a long story short, I was not happy with the axe-fx sounds I was getting in studio, and I've been thinking about it lately. I was running: PRS standard 24 statin > Axefx, out 1 > avalon tube mic pre > into...
  25. T

    After a month..

    So, I've played with this for almost a month, and LOVE the clean sounds, LOVE the effects, LOVE the routability, and LOVE the flexibility of this thing. The overdriven tones, with single note runs and leads sounded pretty good, high gain, and mid gain, and lower bitey kinds of gain. Here's...
  26. T

    Renaming the User cabs

    I'd like to rename the cabs from "User1" to Vox AC30 for example, to make organization simpler. is this possible?
  27. T

    First of hopefully not too many beginning questions.

    I'm having problems with my axefx already, the outputs seem to be clipping very easily. I'm clipping outs one and 2, even though I'm not even using output 2. Is it just level issues? I have the output 2 knob on the front at absolutely zero, and the output one knob is at like 7 or 8 oclock...
  28. T

    Axe-FX will be here in less than 2 hours!

    I haven't been this excited for a piece of gear in years!! Thanks to examiner, and my roomates for driving six hours to pick it up across the border into the states to pick it up. I am stoked, but the FRFR, I'm sure will be very interesting. Again, thanks Greg (examiner) for a great sale, if...
Back
Top Bottom