Search results for query: *

  1. eldanko

    Importing presets from FM3

    1.12.05 for me as well. My Axe is a Mk2 but that shouldn't matter, I'm assuming?
  2. eldanko

    Importing presets from FM3

    Can you clarify what you mean by "far apart"? Both units are running the most recent official releases - that's what I should be doing, right? Preset attached! Thanks for your help!
  3. eldanko

    Importing presets from FM3

    I don't know what that is! :grinning: This was just a regular ol' .syx file - a single patch that I built in the FM3 and exported.
  4. eldanko

    Importing presets from FM3

    Forgive me if this has been covered already (although I did try to search) but can we no longer import presets made on FM3 into the Axe 3? I built a preset on my FM3 this week and when I tried to import it into the Axe at rehearsal yesterday I got an error message saying it wasn't compatible. I...
  5. eldanko

    Anything like the Kemper "Space" setting for us headphone guys?

    I wouldn't call it redundant necessarily, as the room controls in the cab block allow you to create the ambience without using an additional reverb block. I find the room controls particularly useful for getting "amp in the room" feel when using IEMs live. They don't change the tone enough to...
  6. eldanko

    Weatherproofing

    Can confirm that most touring acts carry Saran Wrap for use in the event of a downpour. It's already been mentioned, but leaving some ports open for ventilation is typically a good move.
  7. eldanko

    Wish MIDI PC that doesn't deactivate tuner

    Yep. I've looked for workarounds and such but haven't found anything that works yet :(
  8. eldanko

    Wish MIDI PC that doesn't deactivate tuner

    Bumping this again (unless I missed it in an update over the past year). Would it be possible to get this included in an update soon? It's still a pain to have to zero out my volume pedal in case a PC change is fired while I'm tuning. Thanks friends!
  9. eldanko

    Kemper Double Tracker Feature on Axe-FX III?

    The pitch block is great for stuff like this. Add tones hard panned L and R with +/- pitch and a slight delay. Or pan dry signal to one side and a second pitch to the R. There are lots of fun tones to be had.
  10. eldanko

    Wish MIDI PC that doesn't deactivate tuner

    Our band is using Ableton to push patch and scene changes out to my Fractal during live shows. So far, it's working great except for one quirk: if I am in the middle of tuning and a PC message fires from the computer, the tuner is turned off when the new preset is loaded. This is a bit annoying...
  11. eldanko

    Incoming MIDI PC turning off tuner

    Right on! Adding it now. Thanks mate.
  12. eldanko

    Incoming MIDI PC turning off tuner

    Our band is using Ableton to push patch and scene changes out to my Fractal during live shows. So far, it's working great except for one quirk: if I am in the middle of tuning and a PC message fires from the computer, the tuner is turned off when the new preset is loaded. This is a bit annoying...
  13. eldanko

    FM3 for Effects/4CM

    I run mine like this sometimes and it's incredible for it. Plenty of CPU since you're not having to run amp/cab blocks (although using an amp block to replace the amp's preamp is super fun too).
  14. eldanko

    Let's see those FM3 rigs!

    WELL DONE! :sweatsmile:
  15. eldanko

    Let's see those FM3 rigs!

    Totally! Your rig looks great btw! My plan has always been to stash the FM3 upstage and only use the FC6 during shows. It's definitely too high of a platform for me to use the FM3 underfoot, plus I'd have to really beef up the supports to take the added weight.
  16. eldanko

    Let's see those FM3 rigs!

    So earlier I posted the following rig that I had put together for my FM3/FC6/Shure Wireless: https://forum.fractalaudio.com/threads/lets-see-those-fm3-rigs.158779/post-1957455 After building a couple of similar boxes for friends, I decided to try a new approach to improve ventilation and offer...
  17. eldanko

    Let's see those FM3 rigs!

    They may not have them on their site, but if you contact them they can absolutely do it! You can find them on Amazon as well, but the shortest I could find was 6 ft so you'd need to do some cable management depending on board size.
  18. eldanko

    Let's see those FM3 rigs!

    Hmmmmmm. Excellent call! I forgot about the vents on the bottom, only remembered the ones on the sides. Guess I'll go play with my jigsaw. The metal board is a Pedaltrain so it should be fine.
  19. eldanko

    Let's see those FM3 rigs!

    This week I finished my new FM3 fly rig. The rig I've toured the past 3 years was an AX8 on a Pedaltrain PT2. Moving to the FM3, I had a few requirements that I wanted to satisfy: Minimum of 6 switches + 2 expression pedals As little setup time as possible (we frequently play festivals with...
  20. eldanko

    First outdoors show with FM3

    Welp, my outdoor show got cancelled after all the bad Chase Rice PR. Looking forward to hearing about everyone else's experiences :tongueclosed:
  21. eldanko

    First outdoors show with FM3

    Following. This is a little concerning, as the AX8 was amazing in high temps. I toured it in the Middle East twice and did shows in excess of 110 degree weather with absolutely no failures... even when our FOH and monitor consoles died, the AX8 did great. I have an outdoor show in Louisiana...
  22. eldanko

    FS Matrix GT800FX Power Amp

    This amp was toured for a year and has a little rack rash on the top and bottom. Otherwise, it functions perfectly and runs quiet as a mouse. It's a seriously great piece of gear. $525 shipped/PP'd obo. No trades, thank you!
  23. eldanko

    Wish More MIDI PC and CC commands per scene

    Bumping this to add support. Looks like the HX Effects offers 6 midi blocks per scene. Would be awesome to have more than two here, as I'm currently having to supplement an external controller for more commands.
  24. eldanko

    Wish Rename the blocks/scenes

    +1 for being able to simply assign 3 digit names to the scene footswitches.
  25. eldanko

    Mission Customer Service

    I've got 3 of their expression pedals, and two of them have treadles that have worn to the point where the pedal will not hold it's position (always rocks back forward once I take my foot off). Likewise, their support has been less than helpful. Sent from my iPhone using Tapatalk
  26. eldanko

    MFC Availability 2013?

    May 3rd. Just ordered!
  27. eldanko

    MFC Availability 2013?

    Getting all quiet in here again.... and approaching the 6th week since the update email :)
  28. eldanko

    Taking the Port City Plunge...

    Love my 2x12 OS. About to load it with a V30/ET65 combination and run it with a GT800FX in stereo. I'm drooling just thinking about it.
  29. eldanko

    do you guys turn off mic's on the cabs when going FRFR?

    I'm still new at it, but I instinctively turned them off on several of the first patches I created. May very well be a FW10 thing, but I did feel like the sound was more similar to the amps I had in the room for comparison.
  30. eldanko

    Anyone has experience with Port City OS 1x12?

    To each his own. Chicks dig mine. :lol
  31. eldanko

    Anyone has experience with Port City OS 1x12?

    I have both an OS 2x12 (currently for sale) and an OS 1x12. It's hands down the best sounding 1x12 cab I've ever used. It has a very small and light form factor (even the OS one) compared to other 1x12s I've owned, but sounds very full. I don't have specific experience running the matrix amp...
  32. eldanko

    EV ZLX-12P First Day

    Howdy friends - first post here. Happy to join the Axe family. I happened to order one of these between zentman's initial (happy) and eventual (sad) reviews. It came in today, and I thought I would throw in my .02 to help with anyone else thinking about picking these up. My experience is...
Back
Top Bottom