Search results for query: *

  1. W

    FC Setlist and Song modes

    Same here. I don‘t understand this at all.
  2. W

    Setlist functionality for Axe-Fx III (and all other models)

    I am using wireless midi connected with my ipad where I have onsong running. Onsong sends PC-midi to axe switching to the desired song-preset. Onsong can be triggered by bluetooth pedals. Full wireless setup running very stable. ... just to show an alternative :)
  3. W

    FC Setlist and Song modes

    +1
  4. W

    Effects Switching With a Band

    Did I miss something? The necessary switchings should be possible to be triggered by different midi pedals. Player one plays effect instance 1, player two 2. foot pedals to be programmed to switch the related effects on/off.
  5. W

    Unexpected behaviour with FC-6

    a comparable issue has been discussed in depth here: https://forum.fractalaudio.com/threads/switching-songs-in-onsong.153687/
  6. W

    How to use midi to switch amp channels on real amp in AX3?

    You can use the Midi block to send the necessary midi commands per scene to the amp.
  7. W

    FC Setlist and Song modes

    I previously tried to do the same with an AX-8 and it didn't work due to the limited Midi capabilities of the AX-8. The AX-8 could not be programmed to send out a signal to trigger the next song in ONSONG.
  8. W

    FC Setlist and Song modes

    I have my iPad, with ONSONG running on it, connected through a permanently installed wireless midi device with the Axe FX III. The midi connection has to be established once after I switch on the power on the AXE. Then I can select a song on the iPad, also by scrolling through a setlist, and the...
  9. W

    Switching songs in Onsong

    Its hard to believe BUT IT WORKS NOW. I changed the PerPrestet CS settings for everey preset to OFF, stored the preset to make the change permanent and now it works just the way I want it to for live performance. I thank you so much for your patience and help.
  10. W

    Switching songs in Onsong

    I will try the next time I can access my Axe. Unfortunately that will be in some weeks only.
  11. W

    Switching songs in Onsong

    If I remember well I changed to OFF earlier and then every second press of the footswitch nothing has been sent while I wanted to send another „next song“ midi trigger. Does that make any sense?
  12. W

    Switching songs in Onsong

    I change the setting to LAST already before and it didn‘t help by then. I will have to try again because I didn’t change to LAST at all presets in use. Unfortunately I cannot try soon because I’m travelling. Thanks so far to all of you.
  13. W

    Switching songs in Onsong

    Onsong support was not helpful at all. They stated that they don’t give support on third party devices (Axe Fx). I answered that I wanted to understand the behavior of onsong receiving midi messages. Since then no answer. ☹
  14. W

    Switching songs in Onsong

    Made a ticket with the OnSong support. Unfortunately no answer yet. Will keep ya posted.
  15. W

    Switching songs in Onsong

    Not that I would know. I tried different trigger signals for the next/previous song including PC messages but the behaviour was always the same. Hhm.
  16. W

    Switching songs in Onsong

  17. W

    Switching songs in Onsong

    Both sides are working correctly if not linked. When both are activated the confusion starts. I don`t know how to solve this issue. Eventually there is a mismatch between the presets on the axe and the song positions in onsong creating a strange kind of loop. Nevertheless, that would be strange...
  18. W

    Switching songs in Onsong

    I'll do so tomorrow. Thanks again. I will post further results.
  19. W

    Switching songs in Onsong

    No, not only one midi message. At the first Press/Release nothing happens. At the second try Midi is triggered at Press and Release EACH leading to two song forward messages. Next Press/Release cycle again gives no signal, then again 2 …. I think I have to give up for today and hope fore some...
  20. W

    Switching songs in Onsong

    On a first try nothing happens at Press/release. At a second try Midi is triggered at Press and Release. Next time no trigger on both, than again on Press and release. Very strange.
  21. W

    Switching songs in Onsong

    Did so. Display shows Control Switch 1 On/Off at Press/Release.
  22. W

    Switching songs in Onsong

    Tried at last to play with the CC Number but that wasn't it.
  23. W

    Switching songs in Onsong

  24. W

    Switching songs in Onsong

    Did so after your earlier comment. No success.
  25. W

    Switching songs in Onsong

    Set to Momentary and programmed only one value to be send- unfortunately no change.
  26. W

    Switching songs in Onsong

    I hope the attached screenshots help. Hope the screenshots show what you want/need.
  27. W

    Switching songs in Onsong

    @reclavea I use a Quicco Sound mi.1 wireless midi interface. It works flawless until now and is 100% reliable until now. @simonp54 Thanks, after closing of Axe Edit the heavy load in Midiox is gone. Still couldnt get total clarity of "who sends what" because I cannot see the signals that go...
  28. W

    Switching songs in Onsong

    Tried to program on the AXE in order to secure that it is not the reported problem of simonp54. If I set the second PC message to none the axe sends the related midi message once at every second time I press the footswitch on the FC6. If I set the second PC message to the same value as ON the...
  29. W

    Switching songs in Onsong

    Couldnt clarify the "who sends what" in Midiox because of heavy permanent Sysex load of the axe. I assume this is the communication with the FC6. In addition, my ipad receives Midi signals through a wireless Midi from the AXE and I cannot monitor it by Midiox. How could I proceed? @unix-guy A...
  30. W

    Switching songs in Onsong

    As described above the PC message is not the relevant one. It is ignored by the ipad/onsong. Surprisingly the specifically programmed message, in my example PC 102 at channel 3 seems to be repeated too and initiates a second song change.
  31. W

    Switching songs in Onsong

    If I deactivate the Midi out of the ipad/onsong then I can scroll through the songs by pressing the FC3 footswitches, sending specific Midi signals (e.g. PC 120 on channel 3) for that purpose. If I activate the Midi-Out on the ipad/onsong, a PC signal is send to the Axe on channel 1 (e.g. PC5)...
  32. W

    Switching songs in Onsong

    Sorry. Yes, I have a FC6. I programmed CS1 and CS2 with Midi messages and related them to the Hold function of the FC6-switches 1 and 4. A long press on the buttons released the programmed midi messages (tried with PC and CC-messages) as desired and triggered a song forward or backward as...
  33. W

    Switching songs in Onsong

    I have an AX FX III with a FC-3 and a wireless midi transmitter sending/receiving Midi to/from my iPad with Onsong running on it. I want to scroll through songs (presets) on my axe and want Onsong to follow. That also works with PC messages from Axe to Onsong. I want to manually scroll through...
  34. W

    AX8 Firmware 9.04 Released

    It would be great if once the long ignored midi related wishes of many users would be respected. By that, the usability of the AX8 with its doubtless super sound could be improved in a much greater extend than with another update on the small details of the sound programming, which for sure is...
  35. W

    Removing AX8 Feet for Velcro?

    Bought to many of these screws. In case someone needs some in Switzerland I could send some .
  36. W

    AX8 with acoustic guitars.

    Ist absolutely worth it I would say, a little bit of overkill though but if you love the bomb :-)
  37. W

    Wish MIDI block

    +1 missing better midi flexibility a lot
  38. W

    TC Helicon acoustic live integration with AX8

    Unfortunately the midi possibillities of the AX8 are quite limited. You can send PC messages per program/Scene but you cannot programm the footswitches in a flexible manner to send specific PC or CC signals as real footpedals would. Nevertheless you can coordinate the devices up to a certain...
  39. W

    Song mode

    +1
  40. W

    AX8 V7.00 Public Beta

    I`ll have to wait loading V7 until after the upcoming gig. Nevertheless I wonder wether there will be some improvements regarding the programming of the footswitches. In the Whish List there are many, many whishes related to that and I didn`t find any word about such changes. Will I be dissapointed?
  41. W

    Wish Configure a switch to go directly to Preset X scene 2,3,4...

    +1
  42. W

    Wish Auto engage behavior

    +1
  43. W

    Flexible assignment of foot pedal

    The miscommunication between AX8 and the Gordius device is unpleasant. Nevertheless, I would like to have the flexibility to change the function of the footcontroller on scene level or, even better, when activating certain effects. Then and only then the volume function should be overruled. The...
  44. W

    Wish Setlist Manager

    So my whish remains. I would like to have the possibillity to configure the F switches (HLD) so that I can send midi messages in order to scroll on my external device through my lyrics.
  45. W

    Wish Wireless PC connection instead of USB

    A wireless midi device could help too.
  46. W

    Wish Footswitch assign Szene 3/4 (5/6, 7/8)

    Cycling would be great if the reaction time would be fast enough. Switching 1/2, 3/4,5/6 and 7/8 would be even better in my opinion.
  47. W

    Wish Name footswitch blocks

    +1
  48. W

    Wish Setlist Manager

    I didnt change the midi settings as far as I remember but I noticed now that for every scene 1 no PC was configured. Deviating from that PC messages were configured for the other scenes and that was what confused me. So after correcting that PC messages are send now. I can configure onsong so...
  49. W

    Wish Setlist Manager

    As far as I can see it there is no PC message sent if I use the function switches with PRESET UP or PRESET DOWN for scrolling through presets. A PC message is only sent if I call a preset through SINGLE PRESET/BANK followed by Switch 1-8. Did I miss something?
  50. W

    Flexible assignment of foot pedal

    Xavier from Gordius explained to me that the midi buffer of the AX8 is to small to cope with the continious controle messages in such scenario. :-(
  51. W

    Wish Setlist Manager

    If I would have to use an extra pedal for that simple scenario, I would consider to send back the AX8. Lets not forget that the AX8 is build as a footpedal! It should at least have basic midi functionality. My intention ist to have a streamlined setup of only one pedal (AX8) for my guitar and an...
  52. W

    Wish Setlist Manager

    The PC solution does not work for me because I dont want a scene per song. I would already be happy with a midi signal from a long tap on a f-switch that qould trigger the next/previous song.
  53. W

    Wish Setlist Manager

    Unfortunately there seem to be some problems in the relation between Fractal Audio and Gordius/Xavier and the chances for this (from user point of view) desirable cooperation are close to zero.
  54. W

    Wish Setlist Manager

    That would be really a dream team. Ax8 preamp with Gordius flexibility, wow.
  55. W

    Wish Setlist Manager

    Ok I understand better now. I can send the necessary Midi messages with Onsong. Nevertheless, I want to avoid using my hands switching between songs. So I'd like to see additional functionality of the AX8. Minimum is sending midi PC messages when I scroll through presets using the function...
  56. W

    Flexible assignment of foot pedal

    Thanks philipacamaniac for this solution. I will try it.Nevertheless, with my previous midi-controller (Gordius LG 2) I could activate the footpedal for wah only for the time when I activated the wah effect. It kind of overwrote the vol setting. That was quite useful and straight forward.
  57. W

    Flexible assignment of foot pedal

    I used my foot pedal as volume pedal most of the time with my Axe FX and sometimes used the same pedal as wah or whammy control whenever I switched the related effect on. Vol function was switched off than but came back after I deactivated the effect. I am missing this function because it seems...
  58. W

    Wish Setlist Manager

    Quicco is plugged in but I use Onsong. Is there any special advantage of Setlist maker?
  59. W

    Wish Setlist Manager

    I am using onsong. Would that work as well? I think it should but I didn't have the time to try it.
  60. W

    Wish Setlist Manager

    I would love to have a setlist management in the AX8. I used to use it intensively with my Gordius Midi pedal. I could link songtitles with presets (used just a handful except for some very special settings) and programmed setlists with songtitles before a show. No need to have a specific...
  61. W

    Experience with Dynacord D8 A

    In the meantime I got the cabs and I am very pleased. In the beginning I was dissappointed about the sound beeing harsh and by far not what I wantet. Then, after digging into severeal detais of the settings of the axe, amp sims and power amp setetings, I got closer and closer to the sound I...
  62. W

    Experience with Dynacord D8 A

    Does anybody have experience with these FRFR cabs? I read some good reviews and habe no chance to try these days.
  63. W

    Atomic Wedge on Cab ??

    :-)
  64. W

    Replace SLA-1 fan

    I found the specs in some forums while googeling for fan replacement. It might have even been in this forum. I recently read that the SLA-1 gives a current of 8 V only. Is that correct?
  65. W

    Atomic Wedge on Cab ??

    Thanks to Matman. Your photo answers all my questions, except one. Would it also be possible to turn the wedge so that the stack looks like a traditional one consisting of two cabs? That would give even more flexibility in using a cab/wedge combination.
  66. W

    Atomic Wedge on Cab ??

    I have heard about the left and right story before and i am to weak to carry more then two cabs or wedges. :-) I want to play stereo whenever the situation allows but go back to the stacked version, obviously loosing almost all of the stereo effect, if necessary.
  67. W

    Replace SLA-1 fan

    I tried to replace the fan in my SLA-1 becaus eit is to loud in the studio. Unfortunately two replacement fans that seemed to havethe right parameters didn't start moving after I connected them. Does anyone know how I can overcome this problem? Could I remove the resistor close to the power...
  68. W

    Atomic Wedge on Cab ??

    You've got it correctly. Stacking two cabs would be OK for these purposes. Nevertheless I think, that with a wedge on top of a cab the sound on stage could give a better direct sound to me if the distance to the cab/wedge is small (the to well known "loud sound in the knees" szenario)...
  69. W

    Atomic Wedge on Cab ??

    I want to have the flexibility to use my system in a stereo setup and, especially on small stages, to put the wedge on top of the cab.
  70. W

    Atomic Wedge on Cab ??

    I am considerin buying an Atomic cab and wedge. I want to use it live with my Axe FX for acoustic and electric guitar. I wonder wether you place a wedge on top of a Atomic cabinat or if this doesn't go well.
  71. W

    first live experience

    Used my Axe for the first time live on a local gig with an ART-SL2 Amp and two Mesa Thiel cabs. Recording were done with a camcorder and its internal mike. http://www.youtube.com/watch?v=zO_PJa0q ... re=related Cocaine http://www.youtube.com/watch?v=BL1vD3O5 ... re=related The joker The...
  72. W

    independent 2-Ins and 2-Outs

    I use my axe with cab simulation to go direct to the PA through the main outs. The second outs are used for monitoring on stage without cab sim by using the FXloop. This works fine with one guitar. Now I wonder wether I could use the 2nd IN for an acoustic guitar which has a different input...
Back
Top Bottom