Axe-Fx III Firmware 30.00 Public Beta #2

Status
Not open for further replies.
FractalAudio

FractalAudio

Administrator
Fractal Audio Systems
Moderator
This fixes the issue with the Speaker Drive in Beta #1:
https://www.fractalaudio.com/downlo...xe-fx-3/30p0/axefxiii_dsp_rel_30p00_beta2.zip

Axe-Edit Installers:
OSX
https://www.fractalaudio.com/downloads/Axe-Edit-III/Axe-Edit-III-OSX-v1p14p20.dmg

Win64
https://www.fractalaudio.com/downloads/Axe-Edit-III/Axe-Edit-III-Win-v1p14p20.exe

Win32
https://www.fractalaudio.com/downloads/Axe-Edit-III/Axe-Edit-III-Win32-v1p14p20.exe

Axe-Fx III Firmware Release Notes​

30.00

NOTE: This firmware requires installation of Dyna-Cabs version 1.09 (included in the .zip file). Refer to the DynaCab Installation Guide for details. Be sure to install the firmware before installing the Dyna-Cabs.

Added Tracking Mode parameter to Synth and Ring Mod blocks. When set to “BASS” the pitch tracking range is shifted down one octave with the lowest detectable note being approximately F#0.

Increased upper range of pitch detectors to approximately F#6. This prevents loss of tracking if playing at the 24th fret on the high E string and bending up a whole step.

Added “PI Fuzz – Bass” model based on a Deluxe Bass Big Muff Pi.

Added “NoAmp Bass DI” based on a SansAmp BassDriver DI.

Added “NoAmp Bass Pre” based on a SansAmp BassDriver DI with the speaker emulation bypassed. This can be used into a Cabinet block or as a boost into an Amp block.

Added “Royal Bass DI” based on a Noble Bass Preamp DI. The model has been modified with more gain so that it can be overdriven. With the Drive knob at 5.00 the gain is the same as the actual preamp. Also, instead of a Low Cut switch, the model uses an adjustable Low Cut control.

Added “7 Band Pedal” Graphic EQ type based on a Boss GE-7.

Added “7 Band Bass Pedal” Graphic EQ type based on a Boss GE-7B.

Added “1x8 Princetone” Dyna-Cabs captured from a 5F2 Tweed Princeton w/ a very nice sounding 8” Jupiter speaker. Added corresponding Speaker Impedance Curve.

Added “1x12 Black Majik” Dyna-Cabs captured from a Supro Black Majik with a Jensen P12Q speaker. Added corresponding Speaker Impedance Curve.

Added “8x10 SV Bass” Dyna-Cabs captured from an Ampeg SVT. Added corresponding Speaker Impedance Curve. Thanks to Mike "Dr. Bonkers" Santasiero for the files from his DynaCab Pack, "Dr. Bonkers 8x10 SBB Bass". If you like this selection of mics, you can purchase the entire pack for Cab Lab at https://shop.fractalaudio.com

Improved accuracy of Sustain control vs. position in PI Fuzz models.

Fixed wrong resistor value in Blackglass 7K model. Remastered model as a result.

Fixed incorrect gain in Colortone Booster and Colortone OD models.

Fixed wrong capacitor value in all Blackface Vibrato models (Deluxe Verb, Double Verb, Super Verb, Vibroverb), Div/13 FT37 models and the Double Verb Silverface model. Change probably isn’t very noticeable.

Fixed wrong resistor value in Deluxe Verb Normal model. Remastered model as a result.

Fixed Modern Gate type can get stuck closed if input above threshold during boot.

Various other fixes and improvements.
 
“Added “NoAmp Bass Pre” based on a SansAmp BassDriver DI with the speaker emulation bypassed. This can be used into a Cabinet block or as a boost into an Amp block.”

Praise be! This has always been my biggest gripe as a bassist, that the sans amp baked the cab sim in, so you’d get a “double cab” effect if you played through a cab. This is a perfect example of the advantages of digital imo (and why someone should consider a VP4/FM3 over an analog pedal board), as it lets us get things not available in the real world. Maybe they’ve added a version with a disable-able cab sim recently, but I know it was never possible before.
 
so a stupid question from a newb, don't dynacabs cost money? I'm not seeing a software download for just dynacabs like a manager of some sort....

What dynacab are we installing from the zip file if dyncabs are a paid item?
 
so the dynacab manager is in the zip file or just cabs then? thanks by the way!

I've had this thing for a week or so so some of this is a bit cryptic to me
 
Titleist said:
so a stupid question from a newb, don't dynacabs cost money? I'm not seeing a software download for just dynacabs like a manager of some sort....

What dynacab are we installing from the zip file if dyncabs are a paid item?
Click to expand...
Dynacabs for Cab-Lab software (to be used on a computer) are paid items, dynacabs for Fractal hardware devices are free to use... But can only be used on the device and are more limited compared to those for Cab-Lab
 
Also confirming that a the Black Majik Dyna-Cab calls up 1X12 Deluxe Tweed impedance curve in AMP Block if set to Auto.
SV 8X10 calls up Resistive Load....not SV 8X10.
1X8 Princetone works properly.
 
DLC86 said:
Dynacabs for Cab-Lab software are paid items, dynacabs for Fractal hardware devices are free to use... But can only be used on the device and are more limited compared to those for Cab-Lab
Click to expand...
so there is no "manager" software per se rather just the free cabs.

Think I'm gonna wait on this then until it's final. I'm still learning it anyway.

thanks guys
 
Status
Not open for further replies.
Back
Top Bottom