TenorKeith
Inspired
Nothing on the Axe III board to indicate they're getting an official Cygnus release today. I wish someone at Fractal would let us know where we are with this. Pretty please?
Liaaaaar
Nope - that was the post where he said Yes to a "Could"Liaaaaar
He said yes. That was a solid yes to A firmware this week hahaNope - that was the post where he said "Could"
I think Matt said earlier in the thtead Yes to a Beta release this week
but you will know by 4 pm
they usually donāt release after that point
Vio, you have a problem with people asking about the update status?
Not really, no. Do you have a problem with funny kids having tantrums?Vio, you have a problem with people asking about the update status?
No, but the implication was clear.Do you have a problem with funny kids having tantrums?
implication? nope. not clear to meNo, but the implication was clear.
No, implication as in to "imply" something. Anyway, Cheers!You mean insinuation or allusion?
@BryantP, I was looking for 3.02 and checked the main FM3 page under products, and the firmware listed is still 3.01.FM3 Firmware Version 3.02 is now available for download:
https://www.fractalaudio.com/downloads/firmware-presets/fm3/3p0/fm3_dsp_rel_3p02.zip
A new version of FM3-Edit is required for this release: https://forum.fractalaudio.com/threads/fm3-edit-1-03-02.170930/
NOTE: This release contains exciting new features and fixes, but does NOT include CYGNUS amp modeling, which will be delivered in a future FM3 update.
Release Notes:
ā¢ Added Per-Preset and Global Performance Pages. These provide a new means of intuitive hands-on control of FM3 sound parameters with no menu delving required. (A PDF overview is included with the zip file containing this firmware release.)
ā¢ Added āDowntuneā and āDisplay Modeā parameters to the Tuner, and added the option āAllā to Tuner Input Source so it can track both input 1 and/or input 2.
ā¢ Added Setup: Global: Config āOutput 1 EQ Typeā and āOutput 2 EQ Typeā options for graphic or parametric, including the option to turn each EQ off.
ā¢ Added āFootswitch Tuner Modeā (Setup: FC Controllers: Config) which uses the onboard LED rings on the FM3 to help you tune visually.
ā¢ Added āDetector Typeā (RMS or Peak) to the downward expander effect (Gate Block).
ā¢ Added Diffusion Amount and Time parameters to Crystal Echoes effect (Pitch block).
ā¢ Added Multitap Master Chorus rate and depth parameters.
ā¢ Added LFO High Cut parameter and markers to ADSR graphs.
ā¢ External Controller āInitial Valuesā can now be set to any value from 0 to 100%.
ā¢ Improved the rate of communication with a connected FC controller (especially FC-12).
ā¢ Improved how the FM3 remains connected to FM3-Edit after certain USB āsleepā activity.
ā¢ The UI is now more responsive when a high CPU preset is loaded.
ā¢ FC: Preset/Select in Bank switches will now flash after a bank change until you make a selection. This will not happen if your Bank switch is set to automatically load the FIRST or CURRENT preset in the new bank.
ā¢ FC: You can now install the āOMG9ā FC settings directly from the SETUP: FC Controllers: Reset page of the FM3, with no download required. The OMG9 Ownerās Manual can be found at: http://www.fractalaudio.com/downloads/manuals/FM3/FM3-OMG9-Manual.pdf
ā¢ FC Added: ā2nd Press = Previous Sceneā option to the Scene/Select function. When set to āONā this allows you to press the footswitch for the current scene to return to the previous one.
ā¢ Fixed: Overlapping text when āPrompt on Edited Preset Changeā is enabled.
ā¢ Fixed: Global Input and Output volumes now initialize correctly when an expression pedal is used. (These parameters are located on the āSetup: MIDI/Remote: Otherā page.)
ā¢ Fixed: UI now updates when you disable Tuner āUse Offsetsā in FM3-Edit while tuning.
ā¢ Fixed: āCOPY SCENEā and āSWAP SCENEā now correctly copy or swap scene data in the Scene MIDI block and Control Switch āPer Sceneā settings.
ā¢ Fixed zippering that occurred in some circumstances when using an external MIDI modifier.
ā¢ Fixed: Setting āOutput 2 Copyā to anything other than āNONEā no longer overwrites the regular OUT2 signal.
ā¢ Fixed: Auto-engage now works consistently with modifiers on the amp and delay blocks.
ā¢ FC Fixed: the main LCD on a remote FC should now update correctly in all circumstances.
ā¢ Fixed: Activating the tuner with āholdā on a TEMPO switch will no longer affect the tempo.
ā¢ Fixed: the MIDI block UI now consistently displays the current scene.
ā¢ Fixed: Multiband Compressor now works as expected.
ā¢ Fixed: Global parameters under Midi/Remote now reset correctly to default values.
ā¢ Fixed: User Cab should no longer be able to accidentally overwrite Factory Cab 1.
ā¢ Fixed: Metronome OUT2 level should be correct in all cases.
nvm mean for new beta softwarehavent has chance to play yet
does new drive models just
mean they added drive
models or changed existing ones too?