output 1 direct to FOH and i would like to use output 2 in a cab.i tried several ways but the out 2 level knob seems not to work...any ideas?How do you want to use it? there Are many ways (as part of an FX loop, mirror output 1, route signal , mirror guitar input , etc....
output 1 direct to FOH and i would like to use output 2 in a cab.i tried several ways but the out 2 level knob seems not to work...any ideas?
i connect the output 2 in a guitar amp, in the fx loop. but the volume knob doesn't do anythingIf the cab you are referring to is something FRFR (such as a PA speaker or monitor, studio monitor, headphones, etc) then you need only echo output 1 to output 2 in your main settings and you'll be set. If you are going to be using a cabinet block for the FOH send and something different like a guitar amp or power amp/cab setup onstage, then you'll need to break that out in your preset and send it to output 2.
Perhaps the easiest way for us to help is to tell us exactly what you will be connecting Output 2 to for amplification, and we can help with settings or preset examples to get you going. Like everything else, it's simple once you know how!
The manual is your friend (pages 13-16 for info on hooking up), as is the wiki: http://wiki.fractalaudio.com/axefx2/index.php?title=Category:AX8
Ok, good start. The easy way forward here is to post your preset. The folks here can diagnose from there. Essentially, your preset needs to have a line broken out and directed to output 2 with whatever you want going there. Normally, there would be no cab block in that send but there are other who like the cab block even in that setup. No rules except what works for you!i connect the output 2 in a guitar amp, in the fx loop. but the volume knob doesn't do anything
i've got this in my preset but no sound in out 2. do i have to copy out 1 to out 2 in setup (axe edit)?there is an entire page in the Owner's Manual that shows how to do this:
View attachment 51244
What volume knob? On the Amp or do you mean Output 2 knob?i connect the output 2 in a guitar amp, in the fx loop. but the volume knob doesn't do anything
output 2knob on the ax8What volume knob? On the Amp or do you mean Output 2 knob?
The Output 2 knob needs to be turned up.
Show a picture of what you did.i've got this in my preset but no sound in out 2. do i have to copy out 1 to out 2 in setup (axe edit)?
Look at the back of the AX8. Make sure you’re actually connected to Out2, and not to some other jack.
I don’t understand this at all. Where exactly did you “copy” this?i copied output 1 volumes in output 2 in axe edit
yes sorry for my bad english!I don’t understand this at all. Where exactly did you “copy” this?
Perhaps someone who speaks French can help?