Andre Antunes
Inspired
For example: which value should i set the mids on a super verb model to replicate the sound of a pro reverb? (The pro reverb doesnt have a mid control thats why im asking)
Thanks!
Thanks!
yep. Super = 4x10. Pro = 2x12. Pro reverb is basically a half power twin reverb with fixed mid controls. Twin reverb with 2 tubes pulled is close, but still sounds very different because the transformers are much bigger (85 watts vs 40 watts).
That's true. Wasn't there a 2x10 version of the pro reverb too? Fender had a lot of different configurations through the years.
I've heard people claim as well that the Pro is very similar to a VibroVerb, apart from enclosure and speakers of course. Cliff would probably know what's closest.The black face Pro from 62-65 with the AA763 circuit had a single 15" speaker.
The AA763 circuit is the only common circuit between the Pro and Super as in the OP question.
Other years of the Pro had different circuits and speaker configurations.
I've heard people claim as well that the Pro is very similar to a VibroVerb, apart from enclosure and speakers of course. Cliff would probably know what's closest.
True, but the OP was asking about the Pro REVERB, and that came out in the 60s, shortly after the VibroVerb had been discontinued.The field guide gives specific circuits and schematics for the various years so that's what I always go by, the circuit name.
In the case of the Pro, over the entire time of manufacture, there were many different circuits. The Pro came out in the 40's
True, but the OP was asking about the Pro REVERB, and that came out in the 60s, shortly after the VibroVerb had been discontinued.
true again . while you were on the Super, I was thinking about hearing the Vibro being close. I guess with a good Pro IR (which is in one of the early cabpacks, eventhough not UR) I guess you could get close enough to a Pro with any of the two models...Yep but the Pro Reverb circuits are not the same as any Super.
I guess that was my point, the only Pro close to the Super was the blackface Pro (non reverb) with a 1x15.