TheRedDevil
Experienced
Attached you can find my current AC/DC Angus Young preset scenes based on different Marshall Plexis and Dyna-Cabs I used based on new Axe-Fx III.
To change the gain level please use I/O Input 1 Gain or Amp Gain or Dynamics->GainEnhancer->OutCompression or Speaker Compression or use VolPan ("treble" gain) and Comp Output ("mid" gain) volume level. It emulates the Solodallas Schaffer Replica (Input/Output Level) or the possible influcence of other wirless systems used by Angus. In past I had good results with the real Schaffer+1987x/MV30s/GBs/THDHotPlate with Input Level 10 o'clock and Output Level 12 o'clock.
Also have a look at my AC/DC Live at Donington rig information. The preset is part of the current one.
https://forum.fractalaudio.com/thre...e-at-donington-1991-sound-with-axe-fx.199104/
Remarks: I use Gibson/Rocktile/J&D SGs incl. Gibson 57 Classic or Gibson 57 Classic Plus PUs for the test, Volume (5-)8 until 10 (solo). Input 1 Level in I/O settings on 55%. Treble PU and pole piece screwes head on normal height. I/O Input 1 Gain 1. Rhythm PU a bit outsite the frame/pickguard, not too much, it influences the treble sound. I play on bedroom volume level. Don't forget your cable: I use Sommer Cable SC Spirit LLX with 1M Input 1 Impedance (together that is bright), but also try 230K to reduce brightness!
My rig: https://forum.fractalaudio.com/threads/post-your-axe-fx-iii-rigs-here.136754/post-2475487 my EQs for F12/F12M speakers https://forum.fractalaudio.com/thre...on-1991-sound-with-axe-fx.199104/post-2478670
Current status of preset "ACDC by TRD v1.1 AXE3 FW27b":
Optimized for FW27b2. IN3/OUT3 for ext FREQOUT usage. Flanger for Lynyrd Skynyrd songs. Reverb as alternative for Cab/Room. Enhance for Headphone. Added Scene 2+3 for AC/DC Live at Donington '91 sound incl. TMA.
Old preset I (refer to attachment) FW 24.02b1:
v0.2: Included new JCM800 2203 w/o BrightSwitch w/ HighCut
v0.3: Included new JCM800 2004&2203 w/ BrightSwitch w/o HighCut but 230K Input1 Impedance (Sommer Cables were not available in these years)
v0.4: Switched back to Dyna-Cabs, check CAB-Channel A,B,C and removed Amp-Bypass-Thru mistake, changed Reverb to Large Hall
v0.5 Added Ribbon mic
Old preset Feedback Test3 (refer to attachment) FW 24.02b1:
v01 Preset I incl. feedback feature (FC1 Pedal1)
v0.2 Added Ribbon mic
Old preset II (refer to attachment) FW 24.02b1:
v0.1 Additional amps
v0.2 Added Ribbon mic
Please give me your feedback and if possible your optimized preset.
To change the gain level please use I/O Input 1 Gain or Amp Gain or Dynamics->GainEnhancer->OutCompression or Speaker Compression or use VolPan ("treble" gain) and Comp Output ("mid" gain) volume level. It emulates the Solodallas Schaffer Replica (Input/Output Level) or the possible influcence of other wirless systems used by Angus. In past I had good results with the real Schaffer+1987x/MV30s/GBs/THDHotPlate with Input Level 10 o'clock and Output Level 12 o'clock.
Also have a look at my AC/DC Live at Donington rig information. The preset is part of the current one.
https://forum.fractalaudio.com/thre...e-at-donington-1991-sound-with-axe-fx.199104/
Remarks: I use Gibson/Rocktile/J&D SGs incl. Gibson 57 Classic or Gibson 57 Classic Plus PUs for the test, Volume (5-)8 until 10 (solo). Input 1 Level in I/O settings on 55%. Treble PU and pole piece screwes head on normal height. I/O Input 1 Gain 1. Rhythm PU a bit outsite the frame/pickguard, not too much, it influences the treble sound. I play on bedroom volume level. Don't forget your cable: I use Sommer Cable SC Spirit LLX with 1M Input 1 Impedance (together that is bright), but also try 230K to reduce brightness!
My rig: https://forum.fractalaudio.com/threads/post-your-axe-fx-iii-rigs-here.136754/post-2475487 my EQs for F12/F12M speakers https://forum.fractalaudio.com/thre...on-1991-sound-with-axe-fx.199104/post-2478670
Current status of preset "ACDC by TRD v1.1 AXE3 FW27b":
Optimized for FW27b2. IN3/OUT3 for ext FREQOUT usage. Flanger for Lynyrd Skynyrd songs. Reverb as alternative for Cab/Room. Enhance for Headphone. Added Scene 2+3 for AC/DC Live at Donington '91 sound incl. TMA.
Old preset I (refer to attachment) FW 24.02b1:
v0.2: Included new JCM800 2203 w/o BrightSwitch w/ HighCut
v0.3: Included new JCM800 2004&2203 w/ BrightSwitch w/o HighCut but 230K Input1 Impedance (Sommer Cables were not available in these years)
v0.4: Switched back to Dyna-Cabs, check CAB-Channel A,B,C and removed Amp-Bypass-Thru mistake, changed Reverb to Large Hall
v0.5 Added Ribbon mic
Old preset Feedback Test3 (refer to attachment) FW 24.02b1:
v01 Preset I incl. feedback feature (FC1 Pedal1)
v0.2 Added Ribbon mic
Old preset II (refer to attachment) FW 24.02b1:
v0.1 Additional amps
v0.2 Added Ribbon mic
Please give me your feedback and if possible your optimized preset.
Attachments
Last edited: