tuner output mute/fx loop output continuous

[disinformation]

Hi

Not sure if it's doable, but I'm wondering if theres a way to change the tuner settings to allow it to mute your normal output when the tuner is on, but allowing signal to go through the fx loop I have set in my patch?

I run a rack tuner as well as the axe fx tuner and would like to be able to use both as the rack tuner is generally way more visible from different areas. I've set an fx loop on my patch and run from the send to the input of the rack tuner, I'd like to avoid running into the tuner first, then output of that, into the axe fx, but if thats what I have to do, then so be it

 

[javajunkie]

It appears so from a quick test I did. Set the tuner in the axe-fx to mute out and turn the output 2 echo to input 1. Do not put an effects loop block in your presets. Just go output 2 to tuner.

 

[disinformation]

ill give that a go, but I initially went from one of the normal outs to it and it was a bit dicky... ill try again and see what happens

 

[disinformation]

did it your way, works a treat. Thanks!!