npdcoremetal
Inspired
I recorded a peavy 5150 through v30s with an sm57 ran a ibanez ts9 modded to ts808 specs and a noise suppressor 7 string esp with Emg 81-7 and Emg 707 I did this to try and match the tone with axe two things I notice first and forthmost It sounds almost exact with the exception of Hi end screatching fizz or whatever you want to call it. I have tried using specs from freq range of speakers like celestion v 30 are 85-5.5khz so i set the cab block with a mesa cab with 57 with motor drive at 5 the hi freq at 5.5khz and lows at 85. I did same in amp block peavey is 50hz-20,000hz so i did that on the power amp side the presence freq is 2.2k so and the power amp eq circut is active so i set the depth and presence to active I find i Have to completly pull out 8khz and 63hz my settings are as follows. GAIN 4.5 Bass 6 Mids 4.5 Treble 5.5 Presence 5.5 Master 3.75. Speaker highs at 5.5khz. lows 90 hz eq No 8khz -12 same with 63hz -12 to tame some highs and bass. TS808 Drive 0 Volume 10 Tone 10 etc etc. I still can hear freq in 20khz range if i pull too much it sounds poopie I would love some help to see what others are doing. Just for shits and giggles the actual peavey settongs are as such GAIN 3 Bass 10 mids 4.5 TREBLE 6.5 MASTER 3.5 DEPTH 10 PRESENCE 6.5 MODED TUBE SCREAMER VOLUME 10 TONE 10 GAIN 0. IN THIS SETTING RECORDING THROUGH A AVATAR CAB WITH V30 MICD ON CENTR CONE RIGHT ON THE GRILL THERE ALSO IS GH12 30S NOT MICD. I GET NO WILD BASS THIS WAY NO AND I MEAN NO FIZZY HARSHNESS AT ALL WHEN TRYING TO MATCH IT SOUNDS DEAD ON TOGETHER BUT ALONE NO GOOD AND LIVE ALL I CAN FREAKIN HEAR IS THOUSE FIZZ FREWUENCIES ITS DRIVING ME NUTS WHAT AM I DOING WRONG I HAVE TRIED A SLEW OF PATCHES OF HERE AND THEY ALL HAVE ONE THING IN COMIN WAY WAY TOO MANY SHARP HIGHS. DO NOT TAKE WHAT I SAY WRONG I LIKE A HEALTYH AMOUNT OF HIGS AND PRESENCE JUST NOT EAR PIERCING. ANY HELP MUCH APPRECIATED MY APOLOGIES FOR SLOPPY POST