[solved[ DynaCabs missing proximity parameter

[Thomas Kern]

I really love the DynaCabs, but proximity is important as well. Should be included in Release 7 final.

 

[jellodog]

You can adjust the proximity effect by moving the virtual mic closer to the cab or further away. Whereas that had to be modelled as an effect before for static IRs - it's not needed here. That's all there is to it; you already have it

 

[geetarplayer]

Exactly. And, from Cliff himself...
https://forum.fractalaudio.com/threads/whats-cliff-doing-now.192448/post-2393958

 

[Thomas Kern]

overlaying mic distance with proximity would be a (crazy) improvement. I like to set the proximity frequency in cab block and mix it in. Both in parallel would be absolutely mega, mega

 

[chris]

overlaying mic distance with proximity would be a (crazy) improvement. I like to set the proximity frequency in cab block and mix it in. Both in parallel would be absolutely mega, mega

Mic distance is proximity.

 

[Admin M@]

Mic distance IS proximity.

I fixed this for you.

 

[Admin M@]

@Thomas Kern if you want more oomph, use the lowest two sliders in the amp's graphic EQ.

 

[skolacki]

Real mic proximity seems to be opposite of the legacy proximity.

 

[Rex]

Real mic proximity seems to be opposite of the legacy proximity.

??

 

[skolacki]

??

Closer mic distance is darker on the Dynacab. In legacy mode, increased distance is darker.

 

[chris]

Closer mic distance is darker on the Dynacab. In legacy mode, increased distance is darker.

The number increased for “more proximity effect” not more distance. Proximity effect is more bass when closer.

 

[Rex]

Closer mic distance is darker on the Dynacab. In legacy mode, increased distance is darker.

What @chris said. "Proximity" means "closeness." That's the opposite of "distance."

 

[skolacki]

The number increased for “more proximity effect” not more distance. Proximity effect is more bass when closer.

Thanks guys. I misunderstood this parameter.

 

[billy38]

Yes you must try use preamp parameter in dynacab section.

Use the modern preamp with Bass around 3db and treble a 2 dB
For a modern sound with drive thé result IS very similar with preset legacy for me

For a vintage sound open use preamp vintage with a ROOM/AIR section max 10% air 22% Room Hall 14meters

For me its perfect for many preset.
But i continue use many IR Onhammer for the specifical preset ... with a cab no present in dynacab