Yeah I can definitely see the Tourman version having problems, especially if the handle is similar. It fits the MFC101 and three exp pretty much perfectly they even have a pic of the setup on their website.I can tell you right now that the Diagos are not all they're cracked up to be. They're really nice looking, but my Tourman starting falling apart (beginning w the handle). The feet were attached w tiny screws and came right off and whenever I picked it up when it had the four pedals and MFC, the wood would flex like crazy. Not happy at all with that board overall. As much as it was too (about $200) it was really disappointing.
I just got my mfc 101 set up.
I am using a Diago Showman pedaboard.
Diago PB03 Showman Pedalboard | GuitarCenter
It seems sturdy enough but I worry about the strength of the handle.
I have three expression pedals, an Sp-1 (metal) and two Ep-1 (green and red). Red Ep-1 is spring loaded.
Got the cables from Redco, custom lengths using Redco's 90 degree TRS connectors.
Redco HP3CR | Redco Audio
The 4 cables cost me $81.21 with shipping. If I were to redo it I would probably put the metal SP-1 first and use a shorter switch cable.
I tidied the cables up with a couple zip ties then I made a few little velcro strips and turned them into rings/coils, like rolling a piece of tape I only removed enough of the film on the back to stick the end to itself, and used those to hold the cables to the floor of the case but they aren't really needed.
The cables don't get in the way of anything because I'm using the FAS port on the far side. I really dig how clean the whole package is, i.e. one guitar cable in the input and an XLR for the MFC/ex-pedals.
Waiting for a set of magnetic labels to come in the mail to complete the package.
View attachment 24016
View attachment 24017
Here is my brand new MFC with labels from GigWrx. The labels are a combination of stock and custom. I think they look really great and worth every penny, even though I think they are quite inexpensive. Bill is a great communicator and the service was outstanding: I am an idiot and did not send my custom images in the required resolution, so he simply fixed it for me! He also threw in an extra label since he was not sure if I made a mistake in my order. Plus, it turns out that we live close to each other, so we simply met half way and he handed them over in the dimly lit parking lot of a closed nightclub! I am sure we looked suspicious.
I cannot recommend them enough!
Here is my brand new MFC with labels from GigWrx. The labels are a combination of stock and custom. I think they look really great and worth every penny, even though I think they are quite inexpensive. Bill is a great communicator and the service was outstanding: I am an idiot and did not send my custom images in the required resolution, so he simply fixed it for me! He also threw in an extra label since he was not sure if I made a mistake in my order. Plus, it turns out that we live close to each other, so we simply met half way and he handed them over in the dimly lit parking lot of a closed nightclub! I am sure we looked suspicious.
I cannot recommend them enough!
Nice! GigWrx labels are top notch! Love the ones I already have and I am looking forward to ordering a new set when I decide what will work best for me since I don't really use many effects.. maybe replace them with scene controllers since I'm getting into scenes now.
Here is my brand new MFC with labels from GigWrx. The labels are a combination of stock and custom. I think they look really great and worth every penny, even though I think they are quite inexpensive. Bill is a great communicator and the service was outstanding: I am an idiot and did not send my custom images in the required resolution, so he simply fixed it for me! He also threw in an extra label since he was not sure if I made a mistake in my order. Plus, it turns out that we live close to each other, so we simply met half way and he handed them over in the dimly lit parking lot of a closed nightclub! I am sure we looked suspicious.
I cannot recommend them enough!
Here is my brand new MFC with labels from GigWrx. The labels are a combination of stock and custom. I think they look really great and worth every penny, even though I think they are quite inexpensive. Bill is a great communicator and the service was outstanding: I am an idiot and did not send my custom images in the required resolution, so he simply fixed it for me! He also threw in an extra label since he was not sure if I made a mistake in my order. Plus, it turns out that we live close to each other, so we simply met half way and he handed them over in the dimly lit parking lot of a closed nightclub! I am sure we looked suspicious.
I cannot recommend them enough!
Thanks for the review, enjoyed working with you! Think the set turned out great. Thought the parking lot would have been better lit, lol.
And....thanks Chrismetal86 for the kind words. I just got Scenes on my board and redid some things too. Let us know when you're ready and we will put some new labels together for you!
Bill
Sent from my iPhone
Heya
I just got an mfc yestedray and am mulling over how I want to set it up. The volume buttons are a good idea I hadnt thought of . are they linked to a volume pedal block or amp output or overall output ? do they work in set increments or hold down for a smooth taper ?
Those pedals look rad, BreadTooth. Did you order them from somewhere or have them painted yourself? They look similar to the Mission Re-Wah pedal, but I don't see any options for Candy Purple in any of the other pedals. Mind if I ask how you acquired them?
The short answer is I purchased directly from Mission Engineering.
The EP-1 & SP-1 are not available as standard in purple. This was a custom order, for which I purchased b-stock chassis.
Thanks for the reply. I'm assuming they were significantly pricier than the offered models?
Here is mine:
View attachment 21089
View attachment 21091
View attachment 21092
Many thanks to Bill of Gigwrx who went above & beyond to get me my labels!