Alex C
Inspired
Here's some noodling using the 1.05 firmware.
I used a Kiesel DC727 into an Axe-Fx II MkI using Quantum 1.05 firmware.
The amp model is the Hot Kitty into the Vox Beatle 4x12 cab that was part of the "UltraRes Samples" from a few firmwares ago.
No tweaks to default amp settings other than B-M-T and:
INPUT DRIVE: 3.42
MASTER VOLUME: 5.69
The "Single Coil" clip is the bridge pickup split to single coil mode, with the guitar volume knob set at about 80% and not touched for the duration of the clip in order to get a feel for the touch sensitivity of this model.
The "Humbucker" clip is with the bridge humbucker with the guitar volume all the way up, and a FAS Boost drive is engaged for the fun stuff at the end.
"Racecar" is the bridge humbucker all the way up, with no drive.
I used a Kiesel DC727 into an Axe-Fx II MkI using Quantum 1.05 firmware.
The amp model is the Hot Kitty into the Vox Beatle 4x12 cab that was part of the "UltraRes Samples" from a few firmwares ago.
No tweaks to default amp settings other than B-M-T and:
INPUT DRIVE: 3.42
MASTER VOLUME: 5.69
The "Single Coil" clip is the bridge pickup split to single coil mode, with the guitar volume knob set at about 80% and not touched for the duration of the clip in order to get a feel for the touch sensitivity of this model.
The "Humbucker" clip is with the bridge humbucker with the guitar volume all the way up, and a FAS Boost drive is engaged for the fun stuff at the end.
"Racecar" is the bridge humbucker all the way up, with no drive.