Owner's Manual Possible Errata (v1.0.10)

[LMO]

Just in case there is more than one, I thought it would be good to collect them all in one place.

Section 1.2, page 18:
The inventory of blocks lists both Effects Loop and FX Loop

Are these the same thing?

 

[Matman]

Great idea.

 

[dk_ace]

Mic section of cab block doesn't list none or null as an option.

D

 

[Scott Peterson]

Section 16:3 (page 169): Should be Page 1 for select Cab Type. Says Page 2 on #1, d..

 

[youngmic]

I noticed that in the Signal Flow chart (love that BTW), both outputs are labeled "OUTPUT LEVEL 1". Also, the top one is labeled with (Front) underneath while the bottom is labeled with (Knob). Got to love crowd sourced proofing.

 

[steverosburg]

Page 90: The taps/decay for 3 taps doesn't match the graph. Looks like a copy/paste error...

 

[DanielRigler]

decibel should be abbreviated as dB. There are some db throughout the manual.

 

[DanielRigler]

maybe this is a small thing, but for consistency: there should be a space in front of ms, Hz..etc. at all times.

 

[chapelizod]

The chart on page 23 diagramming the USB I/O is confusing. I realize the labels on the bottom of the "2x4 Audio" grid are meant to read as the USB Audio/Midi streams that will show up on the computer, but it still took me a bit to abstract the terms. Kept expecting them to read as "Outputs" rather than "Inputs" and vice versa. Maybe just prefacing each label on the bottom row with "Host Computer:" or something like that would avoid leading the reader into any conceptual errors.

 

[DanielRigler]

EXCESSS at p.156 and p.159. I don't know maybe it is intentional.

 

[DanielRigler]

p.32: RX return -> FX return ?

 

[Admin M@]

Comments which have a LIKE from fractaladmin have been acknowledged and fixed.

 

[Admin M@]

p.32: RX return -> FX return ?

Not seeing this.

 

[DanielRigler]

Not seeing this.

On the image.

 

[TheReflex]

p.50 Brit JM45 notes, "actually" is listed twice in a row (maybe this is intentional but it reads weird, fyi)

 

[claudel]

On the image.

Hookup diagram on top of the page 32, not the grid diagram...

Between the Axe II and the amp...

 

[Rich G.]

Pg 163: Effect Z would be controlled by Channel 4, because B is on row 4.

should be:

Effect Z would be controlled by Channel 4, because Z is on row 4.

 

[DanielRigler]

p.45: The delay block on the grid diagram looks wrong.

 

[yek]

P.22: "Notes" under "Mac minimum requirements: only talks about the 3rd USB channel, not the 4th.

 

[quonsar]

Page 170: ADSR: Technically, this stands for Attack, Decay, Release, Sustain

release and sustain reversed?