Output 2

[bossredman]

I've read the manual & something just isnt getting through to me.
I will apologise now as Im sure this is something really basic.

I want to send the output of my AXefx into an MPC live to use the MPC's looper.

As i have my studio monitors connected to OUtput 1 via XLR cables.
I thought I would just use Output 2 on teh AxeFX.
So I've connect OP 2 on AXEFX to Inputs on MPC live & signal going into the MPC.

Ive tried a preset both with & wothout an FXloop - get nothing.
Also tried the I/O menu settings for OP2 to various things - get nothings.

Any ideas pls.

Also - would there be anything stopping me using the 1/4" jacks on Output 1 (at the same time as teh XLR's)?

 

[simeon]

in the i/o settings, set output 2 to echo output 1. no need for the fxl block, the same signal will be sent out of both outputs. make sure the out 2 volume is turned up on the front panel

 

[Tonedeaf]

in the i/o settings, set output 2 to echo output 1. no need for the fxl block, the same signal will be sent out of both outputs. make sure the out 2 volume is turned up on the front panel

Perhaps something like "duplicate" would have been a better word than "echo".

 

[bossredman]

in the i/o settings, set output 2 to echo output 1. no need for the fxl block, the same signal will be sent out of both outputs. make sure the out 2 volume is turned up on the front panel

Thanks but I had already that.
Nothing.

 

[chris]

Thanks but I had already that.
Nothing.

Make sure the Fx loop block is not in the preset. Turn up out 2 knob.

yes you can use both out jacks on out 1.

 

[bossredman]

Thanks .
Will try in a while.
For my info.
Does having the fx loop block in the preset block op2?

I tend to have it in there in my presets and feed the MPC live through it.

Btw I'm purely a bedroom player

 

[unix-guy]

Thanks .
Will try in a while.
For my info.
Does having the fx loop block in the preset block op2?

I tend to have it in there in my presets and feed the MPC live through it.

Btw I'm purely a bedroom player

The FXloop block overrides Echo Output 1.

 

[chris]

Thanks .
Will try in a while.
For my info.
Does having the fx loop block in the preset block op2?

I tend to have it in there in my presets and feed the MPC live through it.

Btw I'm purely a bedroom player

FX Loop block “is” out 2 and it overrides the Echo function. Just remove the FX Loop block to use Echo.

If you’re using the FX Loop block as a 2nd input, this may not work and you’ll have to do something else like use Out 1s 1/4” jacks like you mentioned.

 

[bossredman]

Ok thanks all.
So guess I'm left with with having to use the op1 1/4 Jacks aswell as their xlr Jack's.
1/4 to my MPC live
Xlr to my monitors.