SJonesofva
Inspired
Hi all,
Made a mistake buying a Mission EP1-KP instead of the SP1, but based on what I'm reading here and in the manuals this thing should work (but is not). The difference between the EP1-KP and the SP1 is on the SP1 the switch is latching and on the EP1-KP it is momentary.
What I want to do is use the pedal to control both volume and wah and use the switch to bypass one or the other.
I have the pedal connected to an FC6, using Pedal 1 input for the expression and Pedal 2 for the switch. In Setup, FC1 Pedal 1 is set for continuous, and FC1 Pedal 2 is set to momentary. In my test preset, I have a wah block and a volume block. Both Volume and Wah Control are set to FC1 Pedal 1. That part works OK. For Bypass, I have that set to FC1 pedal 2 for both and for Volume, Engaged and Bypassed are inverted. However the switch doesn't do anything and both blocks are bypassed.
Any thoughts or things to try? Right now I'm thinking of sending the EP1-KP back and exchanging for an SP1.
TIA for any help.
Steve
Made a mistake buying a Mission EP1-KP instead of the SP1, but based on what I'm reading here and in the manuals this thing should work (but is not). The difference between the EP1-KP and the SP1 is on the SP1 the switch is latching and on the EP1-KP it is momentary.
What I want to do is use the pedal to control both volume and wah and use the switch to bypass one or the other.
I have the pedal connected to an FC6, using Pedal 1 input for the expression and Pedal 2 for the switch. In Setup, FC1 Pedal 1 is set for continuous, and FC1 Pedal 2 is set to momentary. In my test preset, I have a wah block and a volume block. Both Volume and Wah Control are set to FC1 Pedal 1. That part works OK. For Bypass, I have that set to FC1 pedal 2 for both and for Volume, Engaged and Bypassed are inverted. However the switch doesn't do anything and both blocks are bypassed.
Any thoughts or things to try? Right now I'm thinking of sending the EP1-KP back and exchanging for an SP1.
TIA for any help.
Steve