OmegaZero
Inspired
I was playing a bit this afternoon, then I decided to update from 7.01 to 8.0 while I was on a phone call (since I couldn't play then anyway). Hung up the phone a little while later, rebooted the Axe-Fx to finish the upgrade process, picked my guitar back up, and... no sound. After about 30 minutes of troubleshooting it seems the issue might be something related to input 1, and possibly in software (maybe not hardware). All the other inputs and outputs work normally best I can tell. Also, I get the expected pop noises and meter blips when plugging in to/out of Input 1. There's nothing after that though - no sound, no meters, nothing registering on the input 1 block noise gate gain meter, nada. I've tried multiple guitars and multiple cables as standard process, though I don't know how those could have gone bad. I'm testing with a blank patch with just input1->output1, gate off, etc. I've reset system parameters, rebooted, removed power and rebooted, unplugged everything but the input cable I'm testing with and rebooted. Though I know it's a somewhat foolish exercise I even reinstalled 7.01, tested, reset parameters, tested, reinstalled 8.0, tested, reset and tested again (this was also suggested by Fractal support). I don't see anything in settings that's off. Has anyone seen something like this before? Any ideas?
I have opened a support ticket with Fractal, and I will pursue support there as well. This is a large and knowledgeable community though, and at the moment this seems like a software / settings issue, so I thought I would ask around here for ideas as well...
I have opened a support ticket with Fractal, and I will pursue support there as well. This is a large and knowledgeable community though, and at the moment this seems like a software / settings issue, so I thought I would ask around here for ideas as well...