Etudica
Inspired
I just received my Axe-FX II and have not been able to purchase the MFC yet, so I have a FV-500H directly connected to the pedal input on the back of the Axe-FX II (Exp. out on the pedal itself) to be used as volume pedal. I set my output in I/O menu to use pedal, and it indeed works to control volume. However, does not seem to be calibrated properly - almost no change in the 1st/last 25% of the pedal throw. When I go into the pedal menu and choose calibrate, nothing happens when putting the pedal through its full motion, and no calibration values are displayed after hitting enter to finish. Manually entering start/end values seems to have no effect either. Set to continuous pedal type.
What should I be seeing (if anything) during the calibration process? Is there a different process for calibrating a pedal like this without an MFC inline? I keep seeing people posting values that they obtain after running a pedal calibration, usually 0-115 in this case. Any suggestions are greatly appreciated.
What should I be seeing (if anything) during the calibration process? Is there a different process for calibrating a pedal like this without an MFC inline? I keep seeing people posting values that they obtain after running a pedal calibration, usually 0-115 in this case. Any suggestions are greatly appreciated.