Has anyone tried this EurekaProm with their Axe yet?
I guess I still have questions after reading this thread and their web page.
So...... Does this mean that when you change presets in Preset Mode or Favorite Preset Mode, and then change to effects mode, that the effects are not recognized as "on" and the light is "not on"? Or is the effect "on", but the light for that switch is "not on"?
I have the uno chip now, and when I change presets, my effects are off, even if they are stored in the "on" position in my Axe.
Hello, Dave here from EurekaSound! Thought I'd chime in and answer some of these questions.
First, the EurekaPROM in the PP
rogrammable configuration (which is best suited for Fractal gear) doesn't probe for effect state. [Note: we do have some configurations that do that, specifically for the AdrenaLinn III, and the Behringer V-Amp & Bass V-Amp series. We'd do it for Fractal too if we could find the appropriate MIDI info...] So, when entering
EFfects mode, we have the pedals go into an 'unknown' state, designated by the pedal LEDs blipping every second. Once a pedal is pressed, state is remembered while you remain in
EFfects mode.
Let me briefly explain the four modes of this configuration:
EF - Effects mode. Essentially each of the 10 pedals sends a different CC# with value toggling between 0 & 127. When the value sent is 0, the LED is off. When the value sent is 127, the LED is on. Before a pedal is pressed, the LED blips to let you know that the on/off state of the effects is unknown.
Pr - Preset Mode. Allows you to enter banks & presets. The layout is:
P6=Bank+ P7=Preset+100 P8=Preset+10 P9=Preset+1 P10=Send Program Change Command on any CHange
P1=Bank- P2=Preset-100 P3=Preset-10 P4=Preset-1 P5=Send Program Change Command
FP - Favorite Presets. This mode allows you to store your favorite presets by pressing&holding down the pedal. To recall the preset, just press & release.
SP - Specials. This gives access to the FCB1010 relays & also sends MIDI notes.
The page for
PProgrammable config has more info. If you have more questions let me know.
Cheers,
Dave
EurekaSound!