Fausto Massa
Member
Hi all,
I'm using FM3 as audio interface with Reaper in Windows10. Fw 6.0. I have the following questions:
Sorry if they are trivial questions, but I'm getting really puzzled.
Thank you in advance for any support
Fausto
I'm using FM3 as audio interface with Reaper in Windows10. Fw 6.0. I have the following questions:
- using a patch with -12dB level on the AMP block, verified with CTRL+L that hits 0dB and goes to +1/+2 in the red zone very rarely and doesnt clip, when I record the wet signal through USB 1/2 it enters Reaper track at approx -12dB... is it expected? I would have assumed the recording being the same of CTRL-L displayed output 1 level...
- the DI recorded through USB 3/4 have very low LUFS, approx -33LUFS integrated with an humbucker pickup. The same guitar in my Scarlett 8i6, with zero gain in Input 1 (set as "Instr"), records at -22/-23LUFS integrated, much hotter. Is such a difference expected? Does it mean that any DI my customers supply for reamp which are not that low, should be adjusted around -33LUFS to get consistency in the presets I make with my guitars when I inject them through USB3/4 for reamping?
Sorry if they are trivial questions, but I'm getting really puzzled.
Thank you in advance for any support
Fausto