FM3 Firmware Version 4.00 beta 3

ruso said:
I’ve always found that a few of the factory presets can be a little boomy. Most of which just need a little “low cut” added, depending on your monitoring setup.
Click to expand...

This was last night through my headphones. They’re pretty good, Drop 58x. All I know is the Plexi 50 preset is really good. Found several gems and should have taken notes. Made it to the Tucana and ran out of gas.
 
skolacki said:
This was last night through my headphones. They’re pretty good, Drop 58x. All I know is the Plexi 50 preset is really good. Found several gems and should have taken notes. Made it to the Tucana and ran out of gas.
Click to expand...
Some of the ambient presets are great like one note synthestra
Fm3 sound track , Raja Drone
pitch follower, brown sound
deluxe pedal board and of course Freemans brilliant hours of fun
Drones of Arkaisis
 
if the next zip will still be beta 3 I suggest you include the build number in the file name so we'll be able to refer the bugs to specific builds. I guess it will be easier to track on your side as well...
Fan aside, sounds amazing with the updated presets... :grinning:
 
skolacki said:
This was last night through my headphones. They’re pretty good, Drop 58x. All I know is the Plexi 50 preset is really good. Found several gems and should have taken notes. Made it to the Tucana and ran out of gas.
Click to expand...
Oh yeah, the Plexi 50 scenes are excellent.
 
I see references to the updated Beta 3 link, but haven't found the actual link yet. Could someone please point me in the right direction? Thanks!
 
milan.pohancenik said:
Actually a few posts up :) and of course again, please don't panic. I left the unit sitting for hours with a high cpu demanding preset and the FM3 stayed cool. So it's maybe just some small issue in the firmware that activates it accidentally.

https://www.fractalaudio.com/downloads/firmware-presets/fm3/4p0/fm3_dsp_rel_4p00_beta_3.zip
Click to expand...
Here you go. I don't know if that's most updated or whatnot, but that's the link I've seen shared that still produces a .zip download.
 
Hi all !

Can the FM3 Team please check / advise if the following Tweed Deluxe and Bassman stock NFB Settings - are correct ?

006 - 59 Bassguy => Stock NFB 2.90
007 - 59 Bassguy Jumped => Stock NFB 2.90
008 - 65 Bassguy Bass => Stock NFB 10.00
009 - 65 Bassguy Normal => Stock NFB 10.00
093 - Deluxe Tweed => Stock NFB 0.00
094 - Deluxe Tweed Jumped => Stock NFB 0.00

Many thanks,
Ben
 
So I kicked it with the latest update beta 3...but something wasn't quite right. I reset the amp channel, put back in my 5 band eq on the output of the amp and adjusted the speaker drive settings back to where I had them.
Then I realized that when I put in 4.0 it had changed my input from -6 to -12.
So I put that back to -6 and BOOM! There it is!
This sounds fantastic!
Gigging it Tuesday and Wednesday nights this week at The WestGate Resort Casino here in Vegas...
 
joafink2 said:
I installed beta 3 and it works great for me. No fan issues, no weird computing hard drive sounds, and most importantly SOUNDS STELLAR.
Click to expand...
Even OUT2 global EQ working if set to Copy Out1 ?
Thats the only issue I have so far with Beta3.
 
Right, I have not been able to update to Cygnus beta as due to some travelling and will do tonight.

Apologies as there are many posts and probably has been mentioned. Is the latest beta the one having issues with the fan or this has been addressed now and can be installed safely?

Cheers
 
Same here with the noise - I can definitely hear chirping noise coming from the unit whenever I choose Footswitch layout where there's tap tempo assigned to one of the switches. Temps look ok at around 50 degrees Celsius. As soon as I switch to another layout, the noise goes away. The problem occurred in the previous beta and nothing changed with this one.

It would be nice to hear from FAS whether it's safe to keep this FW.
 
Addy said:
Same here with the noise - I can definitely hear chirping noise coming from the unit whenever I choose Footswitch layout where there's tap tempo assigned to one of the switches. Temps look ok at around 50 degrees Celsius. As soon as I switch to another layout, the noise goes away. The problem occurred in the previous beta and nothing changed with this one.

It would be nice to hear from FAS whether it's safe to keep this FW.
Click to expand...
From where in the unit? Location?
 
Rafa Diaz said:
Right, I have not been able to update to Cygnus beta as due to some travelling and will do tonight.

Apologies as there are many posts and probably has been mentioned. Is the latest beta the one having issues with the fan or this has been addressed now and can be installed safely?

Cheers
Click to expand...
Short answer is: the latest FW fixed fan issues for some and others don’t. You need to check your case. I would recommend to install it and check it.
 
My output 1 volume did set itself to -10db , first time my FOH was like “hey where your volume at”
 
You must log in or register to reply here.
Back
Top Bottom